Stone masonry buildings: shaking table testing and advanced methods of analysis

The paper presents the main results of experimental tests concerning the reduction of the seismic vulnerability of stone masonry buildings with flexible floors. Two mock-ups (original condition and repaired) were tested in a 3D shaking table. The results show that the adopted measures are efficient. A set of non-linear static analyses (pushover) were considered, together with time integration analysis. The non-linear dynamic analyses reproduced the seismic behavior observed in the seismic tests. However, the pushover analyses did not simulate correctly all the failure mode of the structure and should be used with caution.This work was partly funded by project FP7-ENV-2009-1-244123-NIKER of the 7th Framework Programme of the European Commission Project

Air quality in the North of Portugal.

Air pollution in urban areas is a major topic of concern in many large cities. In Portugal, a monitoring network measures relevant pollutants for zones and agglomerations. The measurements of two zones and four agglomerations located in the North of Portugal were used to diagnose the pollution level and the relative air quality. It was found that, despite the need for densification of the network of monitoring stations, ozone (O3) and particulate matter (PM10) reach significant levels in a number of days during the year. Some recommendations are made regarding the inclusion of planning and mitigation actions in the Regional and Municipal Master Plan

Volatile composition and sensory properties of mead

Mead is a traditional beverage that results from the alcoholic fermentation of diluted honey performed by yeasts. Although the process of mead production has been optimized in recent years, studies focused on its sensory properties are still scarce. Therefore, the aim of this work was to analyse the sensory ttributes of mead produced with free or immobilized cells of the Saccharomyces cerevisiae strains QA23 and ICV D47, and to establish potential correlations with its olatile composition. In the volatile composition of mead, the effect of yeast condition was more important than the strain. In respect to sensory analysis, the most pleasant aroma descriptors were correlated with mead obtained with free yeast cells, independently of the strain. Both sensory analysis and volatile composition indicates that the most pleasant mead was produced by free yeast cells. Although this study has provided a significant contribution, further research on the sensory quality of mead is still needed.Portuguese Foundation for Science and Technology (FCT) through a PhD grant (SFRH/BD/45820/2008). This research was partially supported through the PTDC project (PTDC/AGR-ALI/68284/2006) awarded by the FCT. This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684) and BioTecNorte operation (NORTE-01-0145-FEDER-000004) funded by European Regional Development Fund under the scope of Norte2020 – Programa Operacional Regional do Norteinfo:eu-repo/semantics/publishedVersio

Mechanical Performance of Lime Mortar Coatings for Rehabilitation of Masonry Elements in Old and Historical Buildings

The use of lime as a binder in masonry lining mortars plays an important role in its conservation and durability. Knowledge of the mechanical characteristics of pre-existing and restoration mortars is essential in order to guarantee the compatibility between them and for avoiding the appearance of pathologies. The paper mainly focuses on the study of the mechanical performance of lime-based mortars to be applied in rehabilitation works in old buildings. Four types of mortars were tested with very similar workability, based on lime putty, aerial lime, and hydraulic lime. Sand and crushed rock powder were used as aggregates. Compressive and flexural strengths of the mortars were determined, as well as their ultrasonic pulse velocity. Furthermore, specific tests were carried out to characterize the performance of the mortar when used as a binder for plasters and coatings, such as the development of cracking, superficial water absorption under low pressure, and pull-off strength. According to the results obtained, mortars with lime putty showed better mechanical properties, while those with aerial lime had better behavior regarding water absorption under pressure. Despite that, it was generally possible to verify the adequacy of the studied mortars to be used in the rehabilitation of masonry elements.This work was partially funded through the FCT—Foundation for Science and Technology, IP, within the scope of the R&D Unit Institute for sustainability and innovation in structural engineering—ISISE (UIDP / 04029/2020), and by the ERDF through the COMPETE 2020 program, Portugal 2020, under the project POCI-01-0247-FEDER-033990 (iNBRail). The APC for publishing this article was funded by the Conselleria de Educación, Investigación, Cultura y Deporte (at present re-named as Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital) de la GeneralitatValenciana (Spain) (grant code GV/2019/070). The research stay of José Marcos Ortega at the University of Coimbra was financially supported in part by the University of Alicante

Multisensor inspection of laser-brazed joints in the automotive industry

Funding Information: Acknowledgments: Authors acknowledge the European Regional Development Fund (ERDF), Programa Operacional Regional de Lisboa (Lisb@2020 e Portugal2020), for its financial support via the project PROBING (POCI-01-0247-FEDER-040042, Ref. 40042) and the Portuguese company INTROSYS—Integration for Robotic Systems (www.introsys.eu accessed 3 November 2021) for technical collaboration. Authors also acknowledge FCT—MCTES for its financial support via the project UIDB/00667/2020 (UNIDEMI).Automobile laser brazing remains a complex process whose results are affected by several process variables that may result in nonacceptable welds. A multisensory customized inspection system is proposed, with two distinct non-destructive techniques: the potential drop method and eddy current testing. New probes were designed, simulated, produced, and experimentally validated in automobile’s laser-brazed weld beads with artificially introduced defects. The numerical simulations allowed the development of a new four-point probe configuration in a non-conventional orthogonal shape demonstrating a superior performance in both simulation and experimental validation. The dedicated inspection system allowed the detection of porosities, cracks, and lack of bonding defects, demonstrating the redundancy and complementarity these two techniques provide.publishersversionpublishe

Swept-source OCTA quantification of capillary closure predicts ETDRS severity staging of NPDR

To test whether a single or composite set of parameters evaluated with optical coherence tomography angiography (OCTA), representing retinal capillary closure, can predict non-proliferative diabetic retinopathy (NPDR) staging according to the gold standard ETDRS grading scheme. 105 patients with diabetes, either without retinopathy or with different degrees of retinopathy (NPDR up to ETDRS grade 53), were prospectively evaluated using swept-source OCTA (SS-OCTA, PlexElite, Carl Zeiss Meditec) with 15×9 mm and 3×3 mm angiography protocols. Seven-field photographs of the fundus were obtained for ETDRS staging. Eyes from age-matched healthy subjects were also imaged as control. In eyes of patients with type 2 diabetes without retinopathy or ETDRS levels 20 and 35, retinal capillary closure was in the macular area, with predominant alterations in the parafoveal retinal circulation (inner ring). Retinal capillary closure in ETDRS stages 43-53 becomes predominant in the retinal midperiphery with vessel density average values of 25.2±7.9 (p=0.001) in ETDRS 43 and 23.5±3.4 (p=0.001) in ETDRS 47-53, when evaluating extended areas of 15×9 protocol. Combination of acquisition protocols 3×3 mm and 15×9 mm, using SS-OCTA, allows discrimination between eyes with mild NPDR (ETDRS 10, 20, 35) and eyes with moderate-to-severe NPDR (ETDRS grades 43-53). Retinal capillary closure, quantified by SS-OCTA, can identify NPDR severity progression. It is located mainly in the perifoveal retinal capillary circulation in the initial stages of NPDR, whereas the retinal midperiphery is predominantly affected in moderate-to-severe NPDR.info:eu-repo/semantics/publishedVersio

Effect of plug-filling, Testing velocity and temperature on the tensile strength of strap repairs on aluminium structures

In this work, an experimental study was performed on the influence of plug-filling, loading rate and temperature on the tensile strength of single-strap (SS) and double-strap (DS) repairs on aluminium structures. Whilst the main purpose of this work was to evaluate the feasibility of plug-filling for the strength improvement of these repairs, a parallel study was carried out to assess the sensitivity of the adhesive to external features that can affect the repairs performance, such as the rate of loading and environmental temperature. The experimental programme included repairs with different values of overlap length (L O = 10, 20 and 30 mm), and with and without plug-filling, whose results were interpreted in light of experimental evidence of the fracture modes and typical stress distributions for bonded repairs. The influence of the testing speed on the repairs strength was also addressed (considering 0.5, 5 and 25 mm/min). Accounting for the temperature effects, tests were carried out at room temperature (≈23°C), 50 and 80°C. This permitted a comparative evaluation of the adhesive tested below and above the glass transition temperature (T g), established by the manufacturer as 67°C. The combined influence of these two parameters on the repairs strength was also analysed. According to the results obtained from this work, design guidelines for repairing aluminium structures wer

Cysteine Boosts Fitness Under Hypoxia-Mimicked Conditions in Ovarian Cancer by Metabolic Reprogramming

Funding Information: Funding. This research was supported by Funda??o para a Ci?ncia e Tecnologia (FCT) (Ph.D. ProRegeM program, Ref: PD/BD/105893/2014; FCT individual Ph.D. fellowship Ref: 2020.06956.BD) and iNOVA4 Health (Project 4 and Project 21). iNOVA4Health-UID/Multi/04462/2013 is a program financially supported by Funda??o para a Ci?ncia e Tecnologia/ Minist?rio da Educa??o e Ci?ncia, through national funds. The authors would like to acknowledge the Instituto Portugu?s de Oncologia de Lisboa Francisco Gentil (IPOLFG) for partially funding the project. Publisher Copyright: © Copyright © 2021 Nunes, Ramos, Santos, Mendes, Silva, Vicente, Pereira, Félix, Gonçalves and Serpa.Among gynecologic malignancies, ovarian cancer is the third most prevalent and the most common cause of death, especially due to diagnosis at an advanced stage together with resistance to therapy. As a solid tumor grows, cancer cells in the microenvironment are exposed to regions of hypoxia, a selective pressure prompting tumor progression and chemoresistance. We have previously shown that cysteine contributes to the adaptation to this hypoxic microenvironment, but the mechanisms by which cysteine protects ovarian cancer cells from hypoxia-induced death are still to be unveiled. Herein, we hypothesized that cysteine contribution relies on cellular metabolism reprogramming and energy production, being cysteine itself a metabolic source. Our results strongly supported a role of xCT symporter in energy production that requires cysteine metabolism instead of hydrogen sulfide (H2S) per se. Cysteine degradation depends on the action of the H2S-synthesizing enzymes cystathionine β-synthase (CBS), cystathionine γ-lyase (CSE), and/or 3-mercaptopyruvate sulfurtransferase (MpST; together with cysteine aminotransferase, CAT). In normoxia, CBS and CSE inhibition had a mild impact on cysteine-sustained ATP production, pointing out the relevance of CAT + MpST pathway. However, in hypoxia, the concomitant inhibition of CBS and CSE had a stronger impact on ATP synthesis, thus also supporting a role of their hydrogen sulfide and/or cysteine persulfide-synthesizing activity in this stressful condition. However, the relative contributions of each of these enzymes (CBS/CSE/MpST) on cysteine-derived ATP synthesis under hypoxia remains unclear, due to the lack of specific inhibitors. Strikingly, NMR analysis strongly supported a role of cysteine in the whole cellular metabolism rewiring under hypoxia. Additionally, the use of cysteine to supply biosynthesis and bioenergetics was reinforced, bringing cysteine to the plateau of a main carbon sources in cancer. Collectively, this work supports that sulfur and carbon metabolism reprogramming underlies the adaptation to hypoxic microenvironment promoted by cysteine in ovarian cancer.publishersversionpublishe

Técnica para a colagem dos cortes antes da coloração no método de inclusão em celoidina. Adaptação e modificação do processo de Land

info:eu-repo/semantics/publishedVersio

Development and application of a mechanistic nutrient-based model for precision fish farming

This manuscript describes and evaluates the FEEDNETICS model, a detailed mechanistic nutrient-based model that has been developed to be used as a data interpretation and decisionsupport tool by fish farmers, aquafeed producers, aquaculture consultants and researchers. The modelling framework comprises two main components: (i) fish model, that simulates at the individual level the fish growth, composition, and nutrient utilization, following basic physical principles and prior information on the organization and control of biochemical/metabolic processes; and (ii) farm model, that upscales all information to the population level. The model was calibrated and validated for five commercially relevant farmed fish species, i.e., gilthead seabream (Sparus aurata), European seabass (Dicentrarchus labrax), Atlantic salmon (Salmo salar), rainbow trout (Oncorhynchus mykiss), and Nile tilapia (Oreochromis niloticus), using data sets covering a wide range of rearing and feeding conditions. The results of the validation of the model for fish growth are consistent between species, presenting a mean absolute percentage error (MAPE) between 11.7 and 13.8%. Several uses cases are presented, illustrating how this tool can be used to complement experimental trial design and interpretation, and to evaluate nutritional and environmental effects at the farm level. FEEDNETICS provides a means of transforming data into useful information, thus contributing to more efficient fish farmingGrant agreement no. 818367; FEEDNETICS 4.0, funded by EUROSTARS-2 program; FEDER/ERDF, CRESC Algarve 2020 and NORTE 2020; PT-INNOVATION-0099; LA/P/0101/2020info:eu-repo/semantics/publishedVersio