5,819 research outputs found
Four wave mixing with self-phase matching due to collective atomic recoil
We describe a method for non-degenerate four-wave mixing in a cold sample of
4-level atoms. An integral part of the four-wave mixing process is a
collective instability which spontaneously generates a periodic density
modulation in the cold atomic sample with a period equal to half of the
wavelength of the generated high-frequency optical field. Due to the generation
of this density modulation, phase-matching between the pump and scattered
fields is not a necessary initial condition for this wave-mixing process to
occur, rather the density modulation acts to "self phase-match" the fields
during the course of the wave-mixing process. We describe a one-dimensional
model of this process, and suggest a proof-of-principle experiment which would
involve pumping a sample of cold Cs atoms with three infra-red pump fields to
produce blue light.Comment: to appear in Physical Review Letter
Inducing strong density modulation with small energy dispersion in particle beams and the harmonic amplifier free electron laser
We present a possible method of inducing a periodic density modulation in a particle beam with little increase in the energy dispersion of the particles. The flow of particles in phase space does not obey Liouville's Theorem. The method relies upon the Kuramoto-like model of collective synchronism found in free electron generators of radiation, such as Cyclotron Resonance Masers and the Free Electron Laser. For the case of an FEL interaction, electrons initially begin to bunch and emit radiation energy with a correlated energy dispersion which is periodic with the FEL ponderomotive potential. The relative phase between potential and particles is then changed by approximately 180 degrees. The particles continue to bunch, however, there is now a correlated re-absorption of energy from the field. We show that, by repeating this relative phase change many times, a significant density modulation of the particles may be achieved with only relatively small energy dispersion. A similar method of repeated relative electron/radiation phase changes is used to demonstrate supression of the fundamental growth in a high gain FEL so that the FEL lases at the harmonic only
An extended model of the quantum free-electron laser
Previous models of the quantum regime of operation of the Free Electron Laser
(QFEL) have performed an averaging and the application of periodic boundary
conditions to the coupled Maxwell - Schrodinger equations over short, resonant
wavelength intervals of the interaction. Here, an extended, one-dimensional
model of the QFEL interaction is presented in the absence of any such averaging
or application of periodic boundary conditions, the absence of the latter
allowing electron diffusion processes to be modeled throughout the pulse. The
model is used to investigate how both the steady-state (CW) and pulsed regimes
of QFEL operation are affected. In the steady-state regime it is found that the
electrons are confined to evolve as a 2-level system, similar to the previous
QFEL models. In the pulsed regime Coherent Spontaneous Emission (CSE) due to
the shape of the electron pulse current distribution is shown to be present in
the QFEL regime for the first time. However, unlike the classical case, CSE in
the QFEL is damped by the effects of quantum diffusion of the electron
wavefunction. Electron recoil from the QFEL interaction can also cause a
diffusive drift between the recoiled and non-recoiled parts of the electron
pulse wavefunction, effectively removing the recoiled part from the primary
electron-radiation interaction.Comment: Submitted to Optics Expres
Multiple-Purpose Subsonic Naval Aircraft (MPSNA): Multiple Application Propfan Study (MAPS)
Study requirements, assumptions and guidelines were identified regarding carrier suitability, aircraft missions, technology availability, and propulsion considerations. Conceptual designs were executed for two missions, a full multimission aircraft and a minimum mission aircraft using three different propulsion systems, the UnDucted Fan (UDF), the Propfan and an advanced Turbofan. Detailed aircraft optimization was completed on those configurations yielding gross weight performance and carrier spot factors. Propfan STOVL conceptual designs were exercised also to show the effects of STOVL on gross weight, spot factor and cost. An advanced technology research plan was generated to identify additional investigation opportunities from an airframe contractors standpoint. Life cycle cost analysis was accomplished yielding a comparison of the UDF and propfan configurations against each other as well as against a turbofan with equivalent state of the art turbo-machinery
Start to end simulations of the ERL prototype at Daresbury Laboratory
Daresbury Laboratory is currently building an Energy Recovery Linac Prototype (ERLP) that will serve as a research and development facility for the study of beam dynamics and accelerator technology important to the design and construction of the proposed 4th Generation Light Source (4GLS) project. Two major objectives of the ERLP are the demonstration of energy recovery and of energy recovery from a beam disrupted by an FEL interaction as supplied by an infrared oscillator system. In this paper we present start-to-end simulations of the ERLP including such an FEL interaction. The beam dynamics in the highbrightness injector, which consists of a DC photocathode Gun and a superconducting booster, have been modelled using the particle tracking code ASTRA. After the booster the particles have been tracked with the code elegant. The 3D code GENESIS 1.3 was used to model the FEL interaction with the electron beam at 35 MeV. A brief summary of impedance and wakefield calculations for the whole machine is also given
Transform-limited X-ray pulse generation from a high-brightness self-amplified spontaneous-emission free-electron laser
A method to achieve high-brightness self-amplified spontaneous emission (HB-SASE) in the free-electron laser (FEL) is described. The method uses repeated nonequal electron beam delays to delocalize the collective FEL interaction and break the radiation coherence length dependence on the FEL cooperation length. The method requires no external seeding or photon optics and so is applicable at any wavelength or repetition rate. It is demonstrated, using linear theory and numerical simulations, that the radiation coherence length can be increased by approximately 2 orders of magnitude over SASE with a corresponding increase in spectral brightness. Examples are shown of HB-SASE generating transform-limited FEL pulses in the soft x-ray and near transform-limited pulses in the hard x-ray. Such pulses may greatly benefit existing applications and may also open up new areas of scientific research
An EMA analysis of the effect of increasing word length on consonant production in apraxia of speech: A case study
The effect of increasing word length on the articulatory dynamics (i.e. duration, distance, maximum acceleration, maximum deceleration, and maximum velocity) of consonant production in acquired apraxia of speech was investigated using electromagnetic articulography (EMA). Tongue-tip and tongue-back movement of one apraxic patient was recorded using the AG-200 EMA system during word-initial consonant productions in one, two, and three syllable words. Significantly deviant articulatory parameters were recorded for each of the target consonants during one, two, and three syllables words. Word length effects were most evident during the release phase of target consonant productions. The results are discussed with respect to theories of speech motor control as they relate to AOS
Reversing conditional orderings
We analyze some specific aspects concerning conditional orderings and relations among them. To this purpose we define a suitable concept of reversed conditional ordering and prove some related results. In particular we aim to compare the univariate stochastic orderings ≤ st, ≤ hr, and ≤ lr in terms of differences among different notions of conditional orderings. Some applications of our result to the analysis of positive dependence will be detailed. We concentrate attention to the case of a pair of scalar random variables X, Y . Suitable extensions to multivariate cases are possible
Annexin-A5 assembled into two-dimensional arrays promotes cell membrane repair
Eukaryotic cells possess a universal repair machinery that ensures rapid resealing of plasma membrane disruptions. Before resealing, the torn membrane is submitted to considerable tension, which functions to expand the disruption. Here we show that annexin-A5 (AnxA5), a protein that self-assembles into two-dimensional (2D) arrays on membranes upon Ca2+ activation, promotes membrane repair. Compared with wild-type mouse perivascular cells, AnxA5-null cells exhibit a severe membrane repair defect. Membrane repair in AnxA5-null cells is rescued by addition of AnxA5, which binds exclusively to disrupted membrane areas. In contrast, an AnxA5 mutant that lacks the ability of forming 2D arrays is unable to promote membrane repair. We propose that AnxA5 participates in a previously unrecognized step of the membrane repair process: triggered by the local influx of Ca2+, AnxA5 proteins bind to torn membrane edges and form a 2D array, which prevents wound expansion and promotes membrane resealing
BxDF material acquisition, representation, and rendering for VR and design
Photorealistic and physically-based rendering of real-world environments with high fidelity materials is important to a range of applications, including special effects, architectural modelling, cultural heritage, computer games, automotive design, and virtual reality (VR). Our perception of the world depends on lighting and surface material characteristics, which determine how the light is reflected, scattered, and absorbed. In order to reproduce appearance, we must therefore understand all the ways objects interact with light, and the acquisition and representation of materials has thus been an important part of computer graphics from early days. Nevertheless, no material model nor acquisition setup is without limitations in terms of the variety of materials represented, and different approaches vary widely in terms of compatibility and ease of use. In this course, we describe the state of the art in material appearance acquisition and modelling, ranging from mathematical BSDFs to data-driven capture and representation of anisotropic materials, and volumetric/thread models for patterned fabrics. We further address the problem of material appearance constancy across different rendering platforms. We present two case studies in architectural and interior design. The first study demonstrates Yulio, a new platform for the creation, delivery, and visualization of acquired material models and reverse engineered cloth models in immersive VR experiences. The second study shows an end-to-end process of capture and data-driven BSDF representation using the physically-based Radiance system for lighting simulation and rendering
- …