SEM and fractography analysis of screw thread loosening in dental implants.

Biological and technical failures of implants have already been reported. Mechanical factors are certainly of importance in implant failures, even if their exact nature has not yet been established. The abutment screw fracture or loosening represents a rare, but quite unpleasant failure. The aim of the present research is an analysis and structural examination of screw thread or abutment loosening compared with screw threads or abutment without loosening. The loosening of screw threads was compared to screw thread without loosening of three different implant systems; Branemark (Nobel Biocare, Gothenburg, Sweden), T.B.R. implant systems (Benax, Ancona, Italy) and Restore (Lifecore Biomedical, Chaska, Minnesota, USA). In this study broken screws were excluded. A total of 16 screw thread loosenings were observed (Group I) (4 Branemark, 4 T.B.R and 5 Restore), 10 screw threads without loosening were removed (Group II), and 6 screw threads as received by the manufacturer (unused) (Group III) were used as control (2 Branemark, 2 T.B.R and 2 Restore). The loosened abutment screws were retrieved and analyzed under SEM. Many alterations and deformations were present in concavities and convexities of screw threads in group I. No macroscopic alterations or deformations were observed in groups II and III. A statistical difference of the presence of microcracks were observed between screw threads with an abutment loosening and screw threads without an abutment loosening

Concave Pit-Containing Scaffold Surfaces Improve Stem Cell-Derived Osteoblast Performance and Lead to Significant Bone Tissue Formation

Scaffold surface features are thought to be important regulators of stem cell performance and endurance in tissue engineering applications, but details about these fundamental aspects of stem cell biology remain largely unclear.In the present study, smooth clinical-grade lactide-coglyolic acid 85:15 (PLGA) scaffolds were carved as membranes and treated with NMP (N-metil-pyrrolidone) to create controlled subtractive pits or microcavities. Scanning electron and confocal microscopy revealed that the NMP-treated membranes contained: (i) large microcavities of 80-120 microm in diameter and 40-100 microm in depth, which we termed primary; and (ii) smaller microcavities of 10-20 microm in diameter and 3-10 microm in depth located within the primary cavities, which we termed secondary. We asked whether a microcavity-rich scaffold had distinct bone-forming capabilities compared to a smooth one. To do so, mesenchymal stem cells derived from human dental pulp were seeded onto the two types of scaffold and monitored over time for cytoarchitectural characteristics, differentiation status and production of important factors, including bone morphogenetic protein-2 (BMP-2) and vascular endothelial growth factor (VEGF). We found that the microcavity-rich scaffold enhanced cell adhesion: the cells created intimate contact with secondary microcavities and were polarized. These cytological responses were not seen with the smooth-surface scaffold. Moreover, cells on the microcavity-rich scaffold released larger amounts of BMP-2 and VEGF into the culture medium and expressed higher alkaline phosphatase activity. When this type of scaffold was transplanted into rats, superior bone formation was elicited compared to cells seeded on the smooth scaffold.In conclusion, surface microcavities appear to support a more vigorous osteogenic response of stem cells and should be used in the design of therapeutic substrates to improve bone repair and bioengineering applications in the future

NEMO-SN1 Abyssal Cabled Observatory in the Western Ionian Sea

The NEutrinoMediterranean Observatory—Submarine Network 1 (NEMO-SN1) seafloor observatory is located in the central Mediterranean Sea, Western Ionian Sea, off Eastern Sicily (Southern Italy) at 2100-m water depth, 25 km from the harbor of the city of Catania. It is a prototype of a cabled deep-sea multiparameter observatory and the first one operating with real-time data transmission in Europe since 2005. NEMO-SN1 is also the first-established node of the European Multidisciplinary Seafloor Observatory (EMSO), one of the incoming European large-scale research infrastructures included in the Roadmap of the European Strategy Forum on Research Infrastructures (ESFRI) since 2006. EMSO will specifically address long-term monitoring of environmental processes related to marine ecosystems, marine mammals, climate change, and geohazards

Event reconstruction for KM3NeT/ORCA using convolutional neural networks

The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neural networks to neutrino telescopes, using simulated datasets for the KM3NeT/ORCA detector as an example. To this end, the networks are employed to achieve reconstruction and classification tasks that constitute an alternative to the analysis pipeline presented for KM3NeT/ORCA in the KM3NeT Letter of Intent. They are used to infer event reconstruction estimates for the energy, the direction, and the interaction point of incident neutrinos. The spatial distribution of Cherenkov light generated by charged particles induced in neutrino interactions is classified as shower- or track-like, and the main background processes associated with the detection of atmospheric neutrinos are recognized. Performance comparisons to machine-learning classification and maximum-likelihood reconstruction algorithms previously developed for KM3NeT/ORCA are provided. It is shown that this application of deep convolutional neural networks to simulated datasets for a large-volume neutrino telescope yields competitive reconstruction results and performance improvements with respect to classical approaches

Event reconstruction for KM3NeT/ORCA using convolutional neural networks

The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino de tector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neural networks to neutrino telescopes, using simulated datasets for the KM3NeT/ORCA detector as an example. To this end, the networks are employed to achieve reconstruction and classification tasks that constitute an alternative to the analysis pipeline presented for KM3NeT/ORCA in the KM3NeT Letter of Intent. They are used to infer event reconstruction estimates for the energy, the direction, and the interaction point of incident neutrinos. The spatial distribution of Cherenkov light generated by charged particles induced in neutrino interactions is classified as shower-or track-like, and the main background processes associated with the detection of atmospheric neutrinos are recognized. Performance comparisons to machine-learning classification and maximum-likelihood reconstruction algorithms previously developed for KM3NeT/ORCA are provided. It is shown that this application of deep convolutional neural networks to simulated datasets for a large-volume neutrino telescope yields competitive reconstruction results and performance improvements with respect to classical approaches

Expansion cone for the 3-inch PMTs of the KM3NeT optical modules

[EN] Detection of high-energy neutrinos from distant astrophysical sources will open a new window on the Universe. The detection principle exploits the measurement of Cherenkov light emitted by charged particles resulting from neutrino interactions in the matter containing the telescope. A novel multi-PMT digital optical module (DOM) was developed to contain 31 3-inch photomultiplier tubes (PMTs). In order to maximize the detector sensitivity, each PMT will be surrounded by an expansion cone which collects photons that would otherwise miss the photocathode. Results for various angles of incidence with respect to the PMT surface indicate an increase in collection efficiency by 30% on average for angles up to 45 degrees with respect to the perpendicular. Ray-tracing calculations could reproduce the measurements, allowing to estimate an increase in the overall photocathode sensitivity, integrated over all angles of incidence, by 27% (for a single PMT). Prototype DOMs, being built by the KM3NeT consortium, will be equipped with these expansion cones.This work is supported through the EU, FP6 Contract no. 011937, FP7 grant agreement no. 212252, and the Dutch Ministry of Education, Culture and Science.Adrián Martínez, S.; Ageron, M.; Aguilar, JA.; Aharonian, F.; Aiello, S.; Albert, A.; Alexandri, M.... (2013). Expansion cone for the 3-inch PMTs of the KM3NeT optical modules. Journal of Instrumentation. 8(3):1-19. https://doi.org/10.1088/1748-0221/8/03/T03006S1198

Expansión controlada de las crestas atróficas en los maxilares. Inserción inmediata de los implantes

La colocación de implantes en zonas edéntulas a menudo está condicionada por un insuficiente espesor de las crestas óseas, debido a la atrofia consecuente a la pérdida de los dientes. En particular, en las personas con la línea de la sonrisa alta se puede observar una reducción de la superficie vestibular con depresiones que pueden comprometer la estética. En presencia de dichas atrofias, el reducido volumen óseo en sentido vestíbulo palatal/lingual reduce la posibilidad de una correcta posición de los implantes. La oportunidad de poder expandir el espacio comprometido entre las dos corticales, ofrece indudables ventajas de tipo estético, biomecánico y funcional tanto en la colocación de los implantes como en la realización de los elementos protésicos. A lo largo de los años se han experimentado varias técnicas con el fin de obtener un aumento horizontal de la cresta, mediante la regeneración y/o injertos óseos autólogos, heterólogos o sintéticos, así como el empleo de la técnica ¿Split-crest¿ por medio de osteotomos, con el fin de provocar una fractura, tipo tallo verde, de la cresta ósea con el consecuente desplazamiento vestibular de los segmentos osteotomizados. Este trabajo tiene el objetivo de presentar una nueva técnica quirúrgica de expansión ósea que, utilizando expansores cónicos con diámetros progresivos insertados por atornillado entre las corticales, permite que el cirujano pueda controlar mejor el trabajo y además es menos traumático para el paciente

Vertical ridge augmentation of atrophic posterior mandible using an inlay technique with a xenograft without miniscrews and miniplates: case series

Rehabilitation of partially or totally edentulous posterior mandible with implant-supported prosthesis has become a common practice in the last few decades, with reliable long-term results. The use of miniscrews and miniplates have been reported to increase the risk of fracture of the osteotomy segments. The purpose of this case series was to use an inlay technique, without the use of miniscrews and miniplates for stabilization of the transported bone fragments.Nine consecutive patients (six men and three women) aged between 26 and 51 years (mean 44 years) were enrolled in this study. A horizontal osteotomy was performed 2-3 mm above the mandibular canal, and two oblique cuts were made using a piezosurgery device. The final phase of the osteotomy was performed with chisels. The osteotomized segment was then raised in the coronal direction, sparing the lingual periosteum. Two miniblocks of xenograft without miniscrews and miniplates were inserted mesially and distally between the cranial osteotomized segment and the mandibular basal bone. The residual space was filled with particles of cortico-cancellous porcine bone. Four months after surgery, a panoramic X-ray was taken before implant insertion. A bone trephine with an internal diameter of 2 mm was used as the second dental drill to take a bone core biopsy during preparation of the #35 and #37 or #45 and #47 implant sites.The postoperative course was uneventful in seven of the nine patients. No dehiscence of the mucosa was observed at the marginal ridge of the mobilized fragment. Newly formed bone was present near the osteotomized segments, and was observed in the bottom half of the specimens and was identified by its higher affinity toward the staining. Newly formed bone was observed to be in close contact with the particles of biomaterials. No gaps or connective tissue were present at the bone-biomaterial interface. Histomorphometry demonstrated that 44±2.1\% of the specimens was composed by newly formed bone, 18±0.8\% by marrow spaces, and 33±2.4\% by the residual grafted biomaterial.The rigidity of the equine collagenated block allowed to eliminate the use of miniscrews and miniplates and simplified the technique. Moreover, the rigidity of the block allowed maintenance of the space

Implants placed in sites of previously failed implants: A systematic review

Abstract PURPOSE: The aim of this study was to systematically review the literature on implant placement in sites of previously failed implants and to assess survival and success rates of the replacement implants to investigate the effectiveness of the procedure. MATERIALS AND METHODS: MEDLINE and Cochrane Oral Health Group databases were used to identify articles published between 1985 and 2011. Six articles were selected for a total of 334 patients (338 implants). RESULTS: The survival rate ranged from 71% to 100%. The survival rate for implants placed for the second time (third attempt) in the sites of previously failed implants was 83.75%. No studies included in this review reported the cumulative success rate except for the prospective one, which reported a 93.7% success rate. The main limitations of the present systematic review have been the scarce number of patients and implants in the analyzed studies and the lack of large well-designed case-control long-term trials. CONCLUSIONS: Survival rates of implants placed in the areas of previously failed implants are low, although they should not discourage clinicians from a second or even a third attempt

Heritability of myopic refractive errors in identical and fraternal twins.

The existence of a visual feedback control of eye growth in humans is controversial, as the contributions of genetic and environmental factors are still unknown. To evaluate the heritability of refractive defects, we measured ocular refraction in 19 monozygote and 20 dizygote twin pairs (mean age 5 years). Monozygosity was ascertained by a common chorion, similarity of somatic traits, and identical dermatogliphes and was confirmed in myopes by blood marker diagnosis. Ocular refractive defects and axial length were evaluated by cycloplegic autorefractometry and biometry. By comparing identical and fraternal twins heritability of refractive defects was estimated to be 0.08-0.14; this low value indicates that the observed variability in refractive errors is nongenetic in origin. Three monozygote pairs were anisomyopic; differences between eyes in identical twins were related to the increased axial length of myopic eyes. In one eye, myopia was attributed to visual deprivation induced by a congenital cataract, while in five eyes it was correlated directly to the degree of astigmatic defects. The discordant axial length observed in monozygote twins is nongenetic. In agreement with previous findings reported in the literature, it is proposed that visual impoverishment of retinal images may play an early regulatory role in postnatal eye growth