Assessment of the risk of Hepatitis E virus occurrence in pork carcasses at slaughter in the UK

Hepatitis E virus (HEV) is a RNA virus of the genus Hepevirus. HEV genotype 3 is zoonotic and pigs are the main reservoir. This genotype has been identified in the United Kingdom, in sporadic locally-acquired cases without recent history of foreign travel to endemic countries. The number of HEV-confirmed human cases in the UK has increased significantly, from 124 cases in 2003 to 661 in 2013. Non-travel cases now account for the majority (69%) of cases observed annually in the UK. Our aim was to assess the risk of HEV occurrence in pork carcases at slaughter in the UK. We performed a quantitative exposure assessment using Monte Carlo simulation to estimate the number of carcasses contaminated with HEV produced in a high throughput porcine abattoir during one year. The input data used were: a) true prevalence in British pigs, b) probability of viral shedding in bile and faeces c) number of pig carcases with bile and/or faecal contamination detected during post-mortem inspection. The following assumptions were made when data were unavailable: a) sensitivity and specificity of the RP-PCR diagnostic test; b) meat from viraemic pigs was considered HEV-positive; c) visual faecal and bile contamination only considered since microscopic contamination would not be detected through visual inspection. We estimated through our model that 175,152 (2.4%) of carcases produced in high throughput abattoirs would be infected with HEV in one year period. The number of viraemic pigs slaughtered at the abattoir was the largest driver of the uncertainty in carcass contamination. Variations in this parameter would change the output from 62,982 carcasses up to 306,320. Mitigation strategies at farm level should be explored, as it appears that control at this level would likely result in a higher reduction in HEV contamination in pork meat

Bank Governance and Performance: A Survey of the Literature

This paper seeks to review the theoretical and empirical literature on the relationship between bank governance and performance, providing a comprehensive understanding of the existing research and offering guidance for investors and regulators on the major points of consensus and disagreement among researchers on this issue. Although the question of what determines the levels of firms’ performance, with special emphasis on the role of the corporate governance, has long been the subject of substantial academic research, it gained increased attention in the banking industry in the last decade due to a series of financial scandals and, more recently, to the global financial crisis. In fact, in the wake of the 2007–2008 financial crisis, bank corporate governance mechanisms received heightened attention, accompanied by the renewed interest in the degree of effectiveness of such mechanisms, and their impact on performance. Given the vast number of influences on corporate performance, such as the numerous characteristics of the board of directors, there is an abundant literature on the determinants of performance. Thus, this paper tries to bring together this diverse body of knowledge into a coherent whole. Banks have unique attributes that interfere with the way in which the usual corporate governance mechanisms work. Thus, the main differences between banks and non-financial firms, which justify that some of the regularities found in the literature on the relationship between a set of corporate governance mechanisms and performance do not hold for banks, are also analysed. Then, we extensively review the literature on the board of directors and its impact on performance in the financial crisis and non-financial crisis periods. Finally, we also survey the (very) scarce research on the relationship between board characteristics and bank failures.This research has been financed by the European Regional Development Fund through COMPETE 2020—Programa Operacional Competitividade e Internacionalização (POCI) and by Portuguese public funds through FCT (Fundação para a Ciência e a Tecnologia) in the framework of the project POCI-01-0145-FEDER-006890.info:eu-repo/semantics/publishedVersio

Interplate versus intraplate strike-slip deformed belts: examples from SW Iberia

A complete transition in tectonic style between pure thrust belts and pure strike-slip beltscan be envisaged, both in interplate and intraplate settings, by a combination of thrust and strike-slipcomponents of displacement. The accommodation of shortening components in strike-slip deforma-tion belts has been discussed recently on the basis of two alternative perspectives: (1) the “sub-horizon-tal attachment model”, where discrete strike-slip faulting of rigid blocks in the schiszosphere evolves tocontinuous movement in plastosphere through a bottom-up driving mechanism controlled by verticalcoupling across the lithosphere, and (2) the “accommodation model” that considers decoupling with-in a heterogeneous and anisotropic plastosphere. Two examples of variable shortening componentaccommodation in strike-slip deformation belts of the SW Iberia Variscides are reported and discussed.In the Tomar-Badajoz-Córdoba shear zone, an important shortening component is accommodated inflat-lying bends around the horizontal axis within a WNW-ESE flower-structure with sinistral strike-slip component; the geodynamic evolution points to an intraplate setting for this structure. In the N-S, Porto-Tomar-Ferreira do Alentejo, dextral shear zone, the shortening component is restricted torestraining bends around the vertical axis; the geodynamic evolution allows inferring a transformnature for this structure, thus indicating an interplate setting. For these examples, the “accommodationmodel” is preferred to the “sub-horizontal attachment model”info:eu-repo/semantics/publishedVersio

The Use of Polypropylene and High-Density Polyethylene on Cork Plastic Composites for Large Scale 3D Printing

Acknowledgements This work is supported by the Fundação para a Ciência e a Tecnologia (FCT) and Centro2020 through the Project references: UID/Multi/04044/2013 and PAMI - ROTEIRO/0328/2013 (Nº 022158). In addition, the authors acknowledge the funding from the project World of Outstanding Wool and Wood (WOWW), POCI-01-0247-FEDER-017574 from the Portuguese National Innovation Agency. The authors gratefully acknowledge to Amorim Cork Composites for the cork powder. We thank Ana O. Tojeira and Ana R. Fonseca for the support provided in performing the laboratorial tests as Laboratory Managing Engineers.This work focuses on studying the possibility of 3D printing of composite materials composed by cork and a polymer matrix (CPC). Initially the cork was mixed with two types of polymers (HDPE and PP) in different proportions and later processed using extrusion and injection. The composites were tested to study the physical, chemical and mechanical properties. The material was then tested on a large-scale 3D printer to study its feasibility and the ability to produce new products through 3D printing. Attention was focused on the use of pure cork, varying the concentration of cork and coupling agent in thermoplastic matrix composites of PP and HDPE. It was demonstrated that the increase of 5wt.% of coupling agent in the two types of polymers significantly improved the mechanical properties and adhesion between the phases but the increase in cork concentration decreased mechanical properties and crystallinity. The CPCs with PP showed to have better mechanical properties, better aesthetic and internal structural quality, and easier processability than those with HDPE matrix. Nevertheless, the HDPE CPCs showed a high degree of crystallization. Concerning 3D printing, it was demonstrated the possibility of making new products based on natural cork fibers, showing promising results, although additional research is still needed to optimize the process.info:eu-repo/semantics/publishedVersio

RISK and SAFE signaling pathway interactions in remote limb ischemic perconditioning in combination with local ischemic postconditioning

Local ischemic postconditioning (IPost) and remote ischemic perconditioning (RIPer) are promising methods to decrease ischemia–reperfusion (I/R) injury. We tested whether the use of the two procedures in combination led to an improvement in cardioprotection through a higher activation of survival signaling pathways. Rats exposed to myocardial I/R were allocated to one of the following four groups: Control, no intervention at myocardial reperfusion; IPost, three cycles of 10-s coronary artery occlusion followed by 10-s reperfusion applied at the onset of myocardial reperfusion; RIPer, 10-min limb ischemia followed by 10-min reperfusion initiated 20 min after coronary artery occlusion; IPost+RIPer, IPost and RIPer in combination. Infarct size was significantly reduced in both IPost and RIPer (34.25 ± 3.36 and 24.69 ± 6.02%, respectively) groups compared to Control (54.93 ± 6.46%, both p < 0.05). IPost+RIPer (infarct size = 18.04 ± 4.86%) was significantly more cardioprotective than IPost alone (p < 0.05). RISK pathway (Akt, ERK1/2, and GSK-3β) activation was enhanced in IPost, RIPer, and IPost+RIPer groups compared to Control. IPost+RIPer did not enhance RISK pathway activation as compared to IPost alone, but instead increased phospho-STAT-3 levels, highlighting the crucial role of the SAFE pathway. In IPost+RIPer, a SAFE inhibitor (AG490) abolished cardioprotection and blocked both Akt and GSK-3β phosphorylations, whereas RISK inhibitors (wortmannin or U0126) abolished cardioprotection and blocked STAT-3 phosphorylation. In our experimental model, the combination of IPost and RIPer improved cardioprotection through the recruitment of the SAFE pathway. Our findings also indicate that cross talk exists between the RISK and SAFE pathways

Artificial neural network modelling of the antioxidant activity and phenolic compounds of bananas submitted to different drying treatments

Bananas (cv. Musa nana and Musa cavendishii) fresh and dried by hot air at 50 and 70 °C and lyophilisation were analysed for phenolic contents and antioxidant activity. All samples were subject to six extractions (three with methanol followed by three with acetone/water solution). The experimental data served to train a neural network adequate to describe the experimental observations for both output variables studied: total phenols and antioxidant activity. The results show that both bananas are similar and air drying decreased total phenols and antioxidant activity for both temperatures, whereas lyophilisation decreased the phenolic content in a lesser extent. Neural network experiments showed that antioxidant activity and phenolic compounds can be predicted accurately from the input variables: banana variety, dryness state and type and order of extract. Drying state and extract order were found to have larger impact in the values of antioxidant activity and phenolic compounds

Thermal performance and comfort condition analysis in a vernacular building with a glazed balcony

The increase in global environmental problems requires more environmentally efficient construction. Vernacular passive strategies can play an important role in helping reducing energy use and CO2 emissions related to buildings. This paper studies the use of glazed balconies in the North of Portugal as a strategy to capture solar gains and reduce heat losses. The purpose is understanding thermal performance and comfort conditions provided by this passive heating strategy. The methodology includes objective (short and long-term monitoring), to evaluate the different parameters affecting thermal comfort and air quality, and subjective assessments to assess occupants? perception regarding thermal sensation. The results show that the use of glazed balconies as a passive heating strategy in a climate with cold winters is viable. During the mid-seasons, the rooms with balcony have adequate comfort conditions. In the heating season, it is possible to achieve comfort conditions in sunny days while in the cooling season there is a risk of overheating. Regarding indoor air quality, carbon dioxide concentrations were low, but the average radon concentration measured was high when the building was unoccupied, rapidly decreasing to acceptable values, during occupation periods when a minimum ventilation rate was promoted. Occupants? actions were essential to improving building behavior.The authors would like to acknowledge the support granted by the FEDER funds through the Competitively and Internationalization Operational Programme (POCI) and by national funds through FCT (Foundation for Science and Technology) within the scope of the project with the reference POCI-01-0145-FEDER-029328, and of the Ph.D. grant with the reference PD/BD/113641/2015, that were fundamental for the development of this study

TiO2 thin film synthesis from complex precursors by CVD, its physical and photocatalytic properties

Photocatalytic TiO2 films on glass and quartz plates were obtained by the chemical vapour deposition using Ti(dpm)(2)(Opr(i))(2) complex compound (CC-CVD method) in a standard vacuum apparatus at 1.2-2.0 x 10(-4) mbar. The substrate temperature was stabilised in the range of 450-600 degreesC. The growth rate varied from several nanometres to several dozen of nanometres per minute. Structural information on TiO2 thin films was obtained from synchrotron radiation experiments. High-resolution grazing incidence X-ray diffraction (GIXRD) experiments were performed at the high-resolution powder diffractometer at the DESY/HASYLAB beamline B2 (Hamburg, Germany). Thin films deposited on either single-crystal Si wafers or on amorphous quartz substrates were analysed. The photocatalytic activity of the TiO2 thin films was studied using a photocatalytic reactor. The fungicide Fenarimol was chosen as chemical indicator and its degradation kinetics was followed by High-Performance Liquid Chromatography (HPLC)

Efficient Parameter Mining and Freezing for Continual Object Detection

Continual Object Detection is essential for enabling intelligent agents to interact proactively with humans in real-world settings. While parameter-isolation strategies have been extensively explored in the context of continual learning for classification, they have yet to be fully harnessed for incremental object detection scenarios. Drawing inspiration from prior research that focused on mining individual neuron responses and integrating insights from recent developments in neural pruning, we proposed efficient ways to identify which layers are the most important for a network to maintain the performance of a detector across sequential updates. The presented findings highlight the substantial advantages of layer-level parameter isolation in facilitating incremental learning within object detection models, offering promising avenues for future research and application in real-world scenarios.Comment: In Proceedings of the 19th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications - Volume 2: VISAPP, ISBN 978-989-758-679-8, ISSN 2184-4321, pages 466-47