Experimental study of photonic band gap accelerator structures

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Physics, 2009.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Cataloged from student submitted PDF version of thesis.Includes bibliographical references (p. 181-186).This thesis reports theoretical and experimental research on a novel accelerator concept using a photonic bandgap (PBG) structure. Major advances in higher order mode (HOM) damping are required for the next generation of TeV linear colliders. In this work, PBG HOMs are studied theoretically and experimentally for the first time. PBG HOMs are shown in simulation to be low Q lattice modes, removed from the cavity defect and beam position. Direct wakefield measurements were made in hot test using the bunch train produced by the MIT HRC 17 GHz linear accelerator. Measurements are compared with beam-loading theory, and wakefield simulations using ANALYST. Excellent agreement is observed between theory predictions and power measured in the 17 GHz fundamental operating mode; reasonable agreement is also seen with the 34 GHz wakefield HOM. In order to understand the performance of PBG structures under realistic high gradient operation, an X-band (11.424 GHz) PBG structure was designed for high power testing in a standing wave breakdown experiment at SLAC. The PBG structure was hot tested to gather breakdown statistics, and achieved an accelerating gradient of 65 MV/m at a breakdown rate of two breakdowns per hour at 60 Hz, and accelerating gradients above 110 MV/m at higher breakdown rates. High pulsed heating occurred in the PBG structure, with many shots above 270 K, and an average of 170 K for 35x10⁶ shots. Damage was observed in both borescope and scanning electron microscope imaging.(cont.) No breakdown damage was observed on the iris surface, the location of peak electric field, but pulsed heating damage was observed on the inner rods, the location of magnetic fields as high as 1 MA/m. Breakdown in accelerator structures is generally understood in terms of electric field effects. PBG structure results highlight the unexpected role of magnetic fields on breakdown. The hypothesis is presented that the low level electric field on the inner rods is enhanced by pulsed heating surface damage, and causes breakdown. A new PBG structure was designed with improved pulsed heating, and will be tested. These results greatly further the understanding of advanced structures with wakefield suppression that are necessary for future colliders.by Roark A. Marsh.Ph.D

High power breakdown testing of a photonic band-gap accelerator structure with elliptical rods

An improved single-cell photonic band-gap (PBG) structure with an inner row of elliptical rods (PBG-E) was tested with high power at a 60 Hz repetition rate at X-band (11.424 GHz), achieving a gradient of 128  MV/m at a breakdown probability of 3.6×10-3 per pulse per meter at a pulse length of 150 ns. The tested standing-wave structure was a single high-gradient cell with an inner row of elliptical rods and an outer row of round rods; the elliptical rods reduce the peak surface magnetic field by 20% and reduce the temperature rise of the rods during the pulse by several tens of degrees, while maintaining good damping and suppression of high order modes. When compared with a single-cell standing-wave undamped disk-loaded waveguide structure with the same iris geometry under test at the same conditions, the PBG-E structure yielded the same breakdown rate within measurement error. The PBG-E structure showed a greatly reduced breakdown rate compared with earlier tests of a PBG structure with round rods, presumably due to the reduced magnetic fields at the elliptical rods vs the fields at the round rods, as well as use of an improved testing methodology. A post-testing autopsy of the PBG-E structure showed some damage on the surfaces exposed to the highest surface magnetic and electric fields. Despite these changes in surface appearance, no significant change in the breakdown rate was observed in testing. These results demonstrate that PBG structures, when designed with reduced surface magnetic fields and operated to avoid extremely high pulsed heating, can operate at breakdown probabilities comparable to undamped disk-loaded waveguide structures and are thus viable for high-gradient accelerator applications.United States. Dept. of Energy. High Energy Physics Division (Contract DEFG02-91ER40648

The ELBA Force Field for Coarse-Grain Modeling of Lipid Membranes

A new coarse-grain model for molecular dynamics simulation of lipid membranes is presented. Following a simple and conventional approach, lipid molecules are modeled by spherical sites, each representing a group of several atoms. In contrast to common coarse-grain methods, two original (interdependent) features are here adopted. First, the main electrostatics are modeled explicitly by charges and dipoles, which interact realistically through a relative dielectric constant of unity (). Second, water molecules are represented individually through a new parametrization of the simple Stockmayer potential for polar fluids; each water molecule is therefore described by a single spherical site embedded with a point dipole. The force field is shown to accurately reproduce the main physical properties of single-species phospholipid bilayers comprising dioleoylphosphatidylcholine (DOPC) and dioleoylphosphatidylethanolamine (DOPE) in the liquid crystal phase, as well as distearoylphosphatidylcholine (DSPC) in the liquid crystal and gel phases. Insights are presented into fundamental properties and phenomena that can be difficult or impossible to study with alternative computational or experimental methods. For example, we investigate the internal pressure distribution, dipole potential, lipid diffusion, and spontaneous self-assembly. Simulations lasting up to 1.5 microseconds were conducted for systems of different sizes (128, 512 and 1058 lipids); this also allowed us to identify size-dependent artifacts that are expected to affect membrane simulations in general. Future extensions and applications are discussed, particularly in relation to the methodology's inherent multiscale capabilities

Resilience of benthic deep-sea fauna to mining activities

With increasing demand for mineral resources, extraction of polymetallic sulphides at hydrothermal vents, cobalt-rich ferromanganese crusts at seamounts, and polymetallic nodules on abyssal plains may be imminent. Here, we shortly introduce ecosystem characteristics of mining areas, report on recent mining developments, and identify potential stress and disturbances created by mining. We analyze species' potential resistance to future mining and perform meta-analyses on population density and diversity recovery after disturbances most similar to mining: volcanic eruptions at vents, fisheries on seamounts, and experiments that mimic nodule mining on abyssal plains. We report wide variation in recovery rates among taxa, size, and mobility of fauna. While densities and diversities of some taxa can recover to or even exceed pre-disturbance levels, community composition remains affected after decades. The loss of hard substrata or alteration of substrata composition may cause substantial community shifts that persist over geological timescales at mined sites. (C) 2017 Elsevier Ltd. All rights reserved.European Union Seventh Framework Programme (FP7) under the MIDAS project; FCT [IF/00029/2014/CP1230/CT0002, SFRH/ BPD/110278/2015]; Spanish RTD project NUREIEV [CTM2013-44598-R]; Ministry of Economy and Competitiveness [SGR 1068]; Generalitat de Catalunya autonomous government; European Union Horizon research and innovation programme [689518]; Fundacao para a Ciencia e a Tecnologia [UID/MAR/04292/2013]; German Ministry of Research (BMBF) [03F0707A-G]; Program Investigador FCT [IF/01194/2013/CP1199/CT0002]info:eu-repo/semantics/publishedVersio

Power measurement of frequency-locked Smith-Purcell radiation

Frequency-locked Smith-Purcell radiation (FL-SPR), generated by a train of electron bunches traveling above a grating, is characterized by a broad range of frequencies which are locked to the train frequency in a discrete comb and are spatially dispersed in space. We report absolute-scale power measurement of FL-SPR in the millimeter wave range. A 50 ns long train of 170   μm electron bunches was produced by a 15 MeV, 17 GHz accelerator with 80 mA of average current. The grating had 20 periods spaced by 2.54 mm. The experimental results were compared, on an absolute scale, with the electric-field integral equation model which takes into consideration the finite length of the grating. Very good agreement was obtained. The present results should be useful in planning SPR applications such as diagnostics of electron bunch length on the femtosecond scale and coherent THz radiation sources

Absolute scale power measurements of frequency-locked coherent transition radiation

We report the absolute power measurement of frequency-locked terahertz coherent transition radiation (CTR) from a train of electron bunches produced by a 17.14 GHz accelerator. Frequency measurements were obtained by two independent techniques: a wave meter with a video diode detector, and a double heterodyne system. Good agreement was seen between these two techniques. The emitted radiation was observed to be a comb of frequencies that are harmonics of the 17.14 GHz accelerator frequency. The heterodyne receiver system showed that each of the emitted harmonics has a very narrow bandwidth, about 25 MHz, which corresponds to the transform-limited bandwidth for the bunch train length of 40 ns. The highest observed frequency was 377.08 GHz, the 22nd harmonic of the 17.14 GHz accelerator frequency. The emitted CTR power was measured on an absolute scale to test the theory of CTR. The power was compared with calculations made using an electric field integral equation (EFIE) formulation and excellent agreement was obtained. This agreement serves as a valuable benchmark of the EFIE code, proof of both its validity and usefulness

X-Band Photonic Band-Gap Accelerator Structure Breakdown Experiment

In order to understand the performance of photonic band-gap (PBG) structures under realistic high gradient, high power, high repetition rate operation, a PBG accelerator structure was designed and tested at X band (11.424 GHz). The structure consisted of a single test cell with matching cells before and after the structure. The design followed principles previously established in testing a series of conventional pillbox structures. The PBG structure was tested at an accelerating gradient of 65 MV/m yielding a breakdown rate of two breakdowns per hour at 60 Hz. An accelerating gradient above 110 MV/m was demonstrated at a higher breakdown rate. Significant pulsed heating occurred on the surface of the inner rods of the PBG structure, with a temperature rise of 85 K estimated when operating in 100 ns pulses at a gradient of 100 MV/m and a surface magnetic field of 890 kA/m. A temperature rise of up to 250 K was estimated for some shots. The iris surfaces, the location of peak electric field, surprisingly had no damage, but the inner rods, the location of the peak magnetic fields and a large temperature rise, had significant damage. Breakdown in accelerator structures is generally understood in terms of electric field effects. These PBG structure results highlight the unexpected role of magnetic fields in breakdown. The hypothesis is presented that the moderate level electric field on the inner rods, about 14 MV/m, is enhanced at small tips and projections caused by pulsed heating, leading to breakdown. Future PBG structures should be built to minimize pulsed surface heating and temperature rise

X-band photonic band-gap accelerator structure breakdown experiment

In order to understand the performance of photonic band-gap (PBG) structures under realistic high gradient, high power, high repetition rate operation, a PBG accelerator structure was designed and tested at X band (11.424 GHz). The structure consisted of a single test cell with matching cells before and after the structure. The design followed principles previously established in testing a series of conventional pillbox structures. The PBG structure was tested at an accelerating gradient of 65  MV/m yielding a breakdown rate of two breakdowns per hour at 60 Hz. An accelerating gradient above 110  MV/m was demonstrated at a higher breakdown rate. Significant pulsed heating occurred on the surface of the inner rods of the PBG structure, with a temperature rise of 85 K estimated when operating in 100 ns pulses at a gradient of 100  MV/m and a surface magnetic field of 890  kA/m. A temperature rise of up to 250 K was estimated for some shots. The iris surfaces, the location of peak electric field, surprisingly had no damage, but the inner rods, the location of the peak magnetic fields and a large temperature rise, had significant damage. Breakdown in accelerator structures is generally understood in terms of electric field effects. These PBG structure results highlight the unexpected role of magnetic fields in breakdown. The hypothesis is presented that the moderate level electric field on the inner rods, about 14  MV/m, is enhanced at small tips and projections caused by pulsed heating, leading to breakdown. Future PBG structures should be built to minimize pulsed surface heating and temperature rise