Behavioral modeling of digital IC input and output ports

This paper addresses the development of accurate and efficient behavioral models of digital integrated circuit input and output ports for signal integrity simulations and timing analyses. The modeling process is described and applied to the characterization of actual device

Behavioral Modeling of IC Ports Including Temperature Effects

The development of temperature-dependent macromodels for digital IC ports is addressed. The proposed modeling approach is based on the theory of discrete-time parametric models and allows one to estimate the model parameters from voltage and current waveforms observed at the ports and to implement the model as a SPICE subcircuit. The proposed technique is validated by applying it to commercial devices described by detailed transistor-level models. The obtained models perform at a good accuracy level and are more efficient than the original transistor-level models

A Method to Discriminate Between the Candida stellata and Saccharomyces cerevisiae in Mixed Fermentation on WLD and Lysine Agar Media

This paper presents a simple method to distinguish between Candida stellata and Saccharomyces cerevisiaeyeasts during microbiological analyses. The method is based on differential yeast growth on a mediumcontaining cycloheximide and a medium containing lysine as only nitrogen source (lysine agar). Thecycloheximide resistance of 45 yeast strains belonging to Candida stellata, Hanseniaspora uvarum, Hanseniasporaguilliermondii, Metschnikowia pulcherrima, Torulaspora delbrueckii, Zygosaccharomyces bailii, Kluyveromycesthermotolerans and Zygoascus hellenicus, and 14 strains of Saccharomyces cerevisiae and Saccharomycesbayanus on WL nutrient agar, was assayed. Cycloheximide resistance is characteristic of the species H. uvarum,H. guilliermondii and Z. hellenicus, while for the other yeasts it depends on the strain and the concentrationof cycloheximide used. Two mg/L of cycloheximide allows selective counting of a strain of C. stellata (Cs3)compared to one of the sensitive S. cerevisiae strain (NDA21). Similar results can be obtained on lysine agar,but counts are reliable only with the additional spreading of a monolayer of Saccharomyces cells. The differentcycloheximide resistance of C. stellata and S. cerevisiae can be used in the microbiological analysis of mixedcultures to monitor the individual growth of the two yeast species. This method can be applied to the studyof mixed fermentations with other non-Saccharomyces species. The modified use of lysine agar is useful to acertain extent in the distinction of multistarter yeasts from the indigenous yeasts

Macromodeling strategy for digital devices and interconnects

International audienceThis paper proposes a macromodeling approach for the simulation of digital interconnected systems. Such an approach is based on a set of macromodels describing IC ports, IC packages and multiconductor interconnect structures in standard circuit simulators, like SPICE. We illustrate the features of the macromodels and we demonstrate the proposed approach on a realistic simulation problem

Investigation of fatigue damage growth and self-heating behaviour of cross-ply laminates using simulation-driven dynamic test

Structural integrity of aerospace assets is paramount for both the safety and economy of aviation industry. The introduction of composites into the design of aero-structures generated several economic benefits but also led to several challenges, including fatigue damage growth and self-heating behaviour. Fatigue of metals is widely managed by calculations of damage accumulation and prediction of residual life. These techniques do not always apply to the fatigue of composites, where the onset and propagation of damage are still under investigation. Furthermore, vibration-induced fatigue is even less understood because of a handful of failure criteria available and, also, because it is biased by the self-heating conditions of the material itself. The authors have underpinned one failure criterion for vibration fatigue and mapped that against self-heating and environmental temperatures. Despite the advances, several research questions were left open because of the complex multiphysics behaviour of fatigue which outreached the experimental capacity. Therefore, this research suggests a Simulation-Driven Dynamic Test (SDDT) framework that deconstructs vibration fatigue experiments into step-wise steady-state analyses. This novel approach will enable (a) investigating the failure mode mixity of the underlying failure criterion, and (b) simulating the surface temperature during the delamination growth under vibration conditions.</p

Passengers information in public transport and privacy: Can anonymous tickets prevent tracking?

Abstract Modern public transportation companies often record large amounts of information. Privacy can be safeguarded by discarding nominal tickets, or introducing anonymization techniques. But is anonymity at all possible when everything is recorded? In this paper we discuss travel information management in the public transport scenario and we present a revealing case study (relative to the city of Cesena, Italy), showing that even anonymous 10-ride bus tickets may betray a user's privacy expectations. We also propose a number of recommendations for the design and management of public transport information systems, aimed at preserving the users’ privacy, while retaining the useful analysis features enabled by the e-ticketing technology

Are Bankers “Crying Wolf”? Type I, Type II Errors and Deterrence in Anti-Money Laundering: The Italian Case

Excessive and useless reporting, called the "crying wolf effect," is a crucial shortcoming that any anti-money laundering (AML) design aims to address. For this reason, in recent years, AML policies in both the US and Europe have switched from a rule-based to a risk-based approach. This study theoretically and empirically investigates whether the risk-based approach delivers the expected results. The theoretical model shows that a trade-off can emerge between accuracy (fewer type-I and type-II errors) and deterrence. The empirical analysis, conducted after the risk-based approach was introduced in Italy, confirms this trade-off. More specifically, deterrence seems a priority, whereas accuracy is sacrificed. In this respect, the data suggest that Italian bankers are likely to "cry wolf.

Modelling sorption thermodynamics and mass transport of n-hexane in a propylene-ethylene elastomer

Optimization of post polymerization processes of polyolefin elastomers (POE) involving solvents is of considerable industrial interest. To this aim, experimental determination and theoretical interpretation of the thermodynamics and mass transport properties of POE-solvent mixtures is relevant. Sorption behavior of n-hexane vapor in a commercial propylene-ethylene elastomer (V8880 Vistamaxx™ from ExxonMobil, Machelen, Belgium) is addressed here, determining experimentally the sorption isotherms at temperatures ranging from 115 to 140 °C and pressure values of n-hexane vapor up to 1 atm. Sorption isotherms have been interpreted using a Non Random Lattice Fluid (NRLF) Equation of State model retrieving, from data fitting, the value of the binary interaction parameter for the n-hexane/V8880 system. Both the cases of temperature-independent and of temperature-dependent binary interaction parameter have been considered. Sorption kinetics was also investigated at different pressures and has been interpreted using a Fick’s model determining values of the mutual diffusivity as a function of temperature and of n-hexane/V8880 mixture composition. From these values, n-hexane intra-diffusion coefficient has been calculated interpreting its dependence on mixture concentration and temperature by a semi-empiric model based on free volume arguments

Determination of a pre-heating sequence for the DONES Target Assembly

Within the activities promoted by the EUROfusion consortium in support of the design and construction of the DEMO Oriented NEutron Source (DONES), a mock-up of its Target Assembly (TA), based on the configuration with a “bayonet” Back-Plate (BP) and available at ENEA Brasimone labs, is being adopted for the execution of experimental activities aiming at the validation of specific aspects of the target design. Despite the “integral”-TA concept is the current reference, experimental tests concerning the TA pre-heating phase are not significantly affected by the TA concept and are still representative even though conducted on the bayonet-TA concept. Indeed, the main objective of the pre-heating phase is to raise the TA temperature up to a value close to that of the lithium flow in nominal condition (250 ◦C). In particular, one of the main concerns is to keep the BP at a temperature higher than 200 ◦C to avoid possible local lithium freezing. In order to support the afore-mentioned tests, a numerical research campaign has been launched by ENEA Brasimone in collaboration with the University of Palermo with the goal of determining an optimal design of the electrical heaters, both in terms of temperature set-points and geometrical layout. To this purpose, several configurations have been assessed following a theoretical-computational approach based on the Finite Element Method (FEM) and adopting the Abaqus FEM code. In a first phase, different electric heater layouts were assessed by means of steady state thermal analyses. Once the most promising scenario was selected, a detailed thermal transient analysis was carried out. An iterative procedure, based on the analysis of the maximum temperature achieved within the mock-up most critical components, was followed in order to determine the duty cycle of the electric heaters. The obtained numerical results are herewith reported and critically discussed