Modulation of Global Low-Frequency Motions Underlies Allosteric Regulation: Demonstration in CRP/FNR Family Transcription Factors

Allostery is a fundamental process by which ligand binding to a protein alters its activity at a distinct site. There is growing evidence that allosteric cooperativity can be communicated by modulation of protein dynamics without conformational change. The mechanisms, however, for communicating dynamic fluctuations between sites are debated. We provide a foundational theory for how allostery can occur as a function of low-frequency dynamics without a change in structure. We have generated coarse-grained models that describe the protein backbone motions of the CRP/FNR family transcription factors, CAP of Escherichia coli and GlxR of Corynebacterium glutamicum. The latter we demonstrate as a new exemplar for allostery without conformation change. We observe that binding the first molecule of cAMP ligand is correlated with modulation of the global normal modes and negative cooperativity for binding the second cAMP ligand without a change in mean structure. The theory makes key experimental predictions that are tested through an analysis of variant proteins by structural biology and isothermal calorimetry. Quantifying allostery as a free energy landscape revealed a protein ‘‘design space’’ that identified the inter- and intramolecular regulatory parameters that frame CRP/FNR family allostery. Furthermore, through analyzing CAP variants from diverse species, we demonstrate an evolutionary selection pressure to conserve residues crucial for allosteric control. This finding provides a link between the position of CRP/FNR transcription factors within the allosteric free energy landscapes and evolutionary selection pressures. Our study therefore reveals significant features of the mechanistic basis for allostery. Changes in low-frequency dynamics correlate with allosteric effects on ligand binding without the requirement for a defined spatial pathway. In addition to evolving suitable three-dimensional structures, CRP/FNR family transcription factors have been selected to occupy a dynamic space that fine-tunes biological activity and thus establishes the means to engineer allosteric mechanisms driven by low-frequency dynamics

The key role of nitric oxide in hypoxia: hypoxic vasodilation and energy supply-demand matching

Significance: a mismatch between energy supply and demand induces tissue hypoxia with the potential to cause cell death and organ failure. Whenever arterial oxygen concentration is reduced, increases in blood flow - 'hypoxic vasodilation' - occur in an attempt to restore oxygen supply. Nitric oxide is a major signalling and effector molecule mediating the body's response to hypoxia, given its unique characteristics of vasodilation (improving blood flow and oxygen supply) and modulation of energetic metabolism (reducing oxygen consumption and promoting utilization of alternative pathways). Recent advances: this review covers the role of oxygen in metabolism and responses to hypoxia, the hemodynamic and metabolic effects of nitric oxide, and mechanisms underlying the involvement of nitric oxide in hypoxic vasodilation. Recent insights into nitric oxide metabolism will be discussed, including the role for dietary intake of nitrate, endogenous nitrite reductases, and release of nitric oxide from storage pools. The processes through which nitric oxide levels are elevated during hypoxia are presented, namely (i) increased synthesis from nitric oxide synthases, increased reduction of nitrite to nitric oxide by heme- or pterin-based enzymes and increased release from nitric oxide stores, and (ii) reduced deactivation by mitochondrial cytochrome c oxidase. Critical issues: several reviews covered modulation of energetic metabolism by nitric oxide, while here we highlight the crucial role NO plays in achieving cardiocirculatory homeostasis during acute hypoxia through both vasodilation and metabolic suppression Future directions: we identify a key position for nitric oxide in the body's adaptation to an acute energy supply-demand mismatc

Successful Use of Squeezed-Fat Grafts to Correct a Breast Affected by Poland Syndrome

This study attempted to reconstruct deformities of a Poland syndrome patient using autologous fat tissues. All injected fat tissues were condensed by squeezing centrifugation. Operations were performed four times with intervals over 6 months. The total injection volume was 972 ml, and the maintained volume of 628 ml was measured by means of a magnetic resonance image (MRI). The entire follow-up period was 4.5 years. After surgery, several small cysts and minimal calcifications were present but no significant complications. The cosmetic outcomes and volume maintenance rates were excellent despite the overlapped large-volume injections. In conclusion, higher condensation of fat tissues through squeezing centrifugation would help to achieve better results in volume maintenance and reduce complications. It is necessary, however, to perform more comparative studies with many clinical cases for a more scientific analysis. The study experiments with squeezed fat simply suggest a hypothesis that squeezing centrifugation could select healthier cells through pressure disruption of relatively thinner membranes of larger, more vulnerable and more mature fat cells

Changes in joint coupling and variability during walking following tibialis posterior muscle fatigue

<p>Abstract</p> <p>Background</p> <p>The tibialis posterior muscle is believed to play a key role in controlling foot mechanics during the stance phase of gait. However, an experiment involving localised tibialis posterior muscle fatigue, and analysis of discrete rearfoot and forefoot kinematic variables, indicated that reduced force output of the tibialis posterior muscle did not alter rearfoot and forefoot motion during gait. Thus, to better understand how muscle fatigue affects foot kinematics and injury potential, the purpose of this study was to reanalyze the data and investigate shank, rearfoot and forefoot joint coupling and coupling variability during walking.</p> <p>Methods</p> <p>Twenty-nine participants underwent an exercise fatigue protocol aimed at reducing the force output of tibialis posterior. An eight camera motion analysis system was used to evaluate 3 D shank and foot joint coupling and coupling variability during treadmill walking both pre- and post-fatigue.</p> <p>Results</p> <p>The fatigue protocol was successful in reducing the maximal isometric force by over 30% and a concomitant increase in coupling motion of the shank in the transverse plane and forefoot in the sagittal and transverse planes relative to frontal plane motion of the rearfoot. In addition, an increase in joint coupling variability was measured between the shank and rearfoot and between the rearfoot and forefoot during the fatigue condition.</p> <p>Conclusions</p> <p>The reduced function of the tibialis posterior muscle following fatigue resulted in a disruption in typical shank and foot joint coupling patterns and an increased variability in joint coupling. These results could help explain tibialis posterior injury aetiology.</p

Movement of the human foot in 100 pain free individuals aged 18–45 : implications for understanding normal foot function

Background: Understanding motion in the normal healthy foot is a prerequisite for understanding the effects of pathology and thereafter setting targets for interventions. Quality foot kinematic data from healthy feet will also assist the development of high quality and research based clinical models of foot biomechanics. To address gaps in the current literature we aimed to describe 3D foot kinematics using a 5 segment foot model in a population of 100 pain free individuals. Methods: Kinematics of the leg, calcaneus, midfoot, medial and lateral forefoot and hallux were measured in 100 self reported healthy and pain free individuals during walking. Descriptive statistics were used to characterise foot movements. Contributions from different foot segments to the total motion in each plane were also derived to explore functional roles of different parts of the foot. Results: Foot segments demonstrated greatest motion in the sagittal plane, but large ranges of movement in all planes. All foot segments demonstrated movement throughout gait, though least motion was observed between the midfoot and calcaneus. There was inconsistent evidence of movement coupling between joints. There were clear differences in motion data compared to foot segment models reported in the literature. Conclusions: The data reveal the foot is a multiarticular structure, movements are complex, show incomplete evidence of coupling, and vary person to person. The data provide a useful reference data set against which future experimental data can be compared and may provide the basis for conceptual models of foot function based on data rather than anecdotal observations

Is TEA an inhibitor for human Aquaporin-1?

Excessive water uptake through aquaporins can be life threatening, and disregulation of water permeability causes many diseases. Therefore, reversible aquaporin inhibitors are highly desired. In this paper, we identified the binding site for tetraethylammonium (TEA) of the membrane water channel aquaporin-1 by a combined molecular docking and molecular dynamics simulation approach. The binding site identified from docking studies was independently confirmed with an unbiased molecular dynamics simulation of an aquaporin tetramer embedded in a lipid membrane, surrounded by a 100-mM tetraethylammonium solution in water. A third independent assessment of the binding site was obtained by umbrella sampling simulations. These simulations, in addition, revealed a binding affinity of more than 17 kJ/mol, corresponding to an IC50 value of << 3 mM. Finally, we observed in our simulations a 50% reduction of the water flux in the presence of TEA, in agreement with water permeability measurements on aquaporin expressed in oocytes. These results confirm TEA as a putative lead for an aquaporin-1 inhibitor

Changes in multi-segment foot biomechanics with a heat-mouldable semi-custom foot orthotic device

<p>Abstract</p> <p>Background</p> <p>Semi-custom foot orthoses (SCO) are thought to be a cost-effective alternative to custom-made devices. However, previous biomechanical research involving either custom or SCO has only focused on rearfoot biomechanics. The purpose of this study was therefore to determine changes in multi-segment foot biomechanics during shod walking with and without an SCO. We chose to investigate an SCO device that incorporates a heat-moulding process, to further understand if the moulding process would significantly alter rearfoot, midfoot, or shank kinematics as compared to a no-orthotic condition. We hypothesized the SCO, whether moulded or non-moulded, would reduce peak rearfoot eversion, tibial internal rotation, arch deformation, and plantar fascia strain as compared to the no-orthoses condition.</p> <p>Methods</p> <p>Twenty participants had retroreflective markers placed on the right limb to represent forefoot, midfoot, rearfoot and shank segments. 3D kinematics were recorded using an 8-camera motion capture system while participants walked on a treadmill.</p> <p>Results</p> <p>Plantar fascia strain was reduced by 34% when participants walked in either the moulded or non-moulded SCO condition compared to no-orthoses. However, there were no significant differences in peak rearfoot eversion, tibial internal rotation, or medial longitudinal arch angles between any conditions.</p> <p>Conclusions</p> <p>A semi-custom moulded orthotic does not control rearfoot, shank, or arch deformation but does, however, reduce plantar fascia strain compared to walking without an orthoses. Heat-moulding the orthotic device does not have a measurable effect on any biomechanical variables compared to the non-moulded condition. These data may, in part, help explain the clinical efficacy of orthotic devices.</p

Study of the reaction e^{+}e^{-} -->J/psi\pi^{+}\pi^{-} via initial-state radiation at BaBar

We study the process $e^+e^-\to J/\psi\pi^{+}\pi^{-}$ with initial-state-radiation events produced at the PEP-II asymmetric-energy collider. The data were recorded with the BaBar detector at center-of-mass energies 10.58 and 10.54 GeV, and correspond to an integrated luminosity of 454 $\mathrm{fb^{-1}}$. We investigate the $J/\psi \pi^{+}\pi^{-}$ mass distribution in the region from 3.5 to 5.5 $\mathrm{GeV/c^{2}}$. Below 3.7 $\mathrm{GeV/c^{2}}$ the $\psi(2S)$ signal dominates, and above 4 $\mathrm{GeV/c^{2}}$ there is a significant peak due to the Y(4260). A fit to the data in the range 3.74 -- 5.50 $\mathrm{GeV/c^{2}}$ yields a mass value $4244 \pm 5$ (stat) $\pm 4$ (syst)$\mathrm{MeV/c^{2}}$ and a width value $114 ^{+16}_{-15}$ (stat)$\pm 7$(syst)$\mathrm{MeV}$ for this state. We do not confirm the report from the Belle collaboration of a broad structure at 4.01 $\mathrm{GeV/c^{2}}$. In addition, we investigate the $\pi^{+}\pi^{-}$ system which results from Y(4260) decay