A sustainable and simple energy dispersive X-ray fluorescence method for sulfur determination at trace levels in biodiesel samples via formation of biodiesel spots on a suitable solid support

The aim of the present work is the development of a simple, sensitive and sustainable EDXRF method for the determination of trace amounts of sulfur in biodiesel samples. In this method, the deposition of several microliters of sample onto an organic thin layer and the analysis of the resulting adsorbed biodiesel spot by benchtop EDXRF is proposed. A careful study was performed to select the volume and the best solid support to deposit biodiesel samples, including filters made of different materials (glass fiber, Nylon, cellulose, paper) and a commercial disposable absorbent pad (UltraCarry, Rigaku). A critical issue that limits the use of most of these solid supports was the relative high blank signals that hamper the determination of sulfur at trace levels. Finally, it was found that best strategy was the deposition of 50 µL of biodiesel on the UltraCarry sample retainer. Operating conditions for EDXRF measurements were also evaluated to obtain the best instrumental sensitivity for sulfur determination (Excitation: 20 kV, no primary filter, measurement time: 300 s). Using the best analytical conditions the quantification limit of the method was 7 mg kg -1 of sulfur. This value is even better than the one reported in the ASTM D4294 method (LOQ: 16.0 mg kg -1 ) but using a sample amount 100 times smaller. The linearity was confirmed in the range of 10–100 mg kg -1 by analyzing a set of commercial biodiesel standards. Accuracy and precision of the results, evaluated by the analysis of samples prepared with the same matrix as the standards, with levels of 20, 40 and 75 mg kg -1 of sulfur, and processed as unknowns, proved acceptable (Recoveries: 94.3–110.6%, RSD: 10.8–13.6%, n = 3) for the intended purpose. Overall, the performance of the method developed is promising and it could be used to determine trace amounts of sulfur in biodiesel samples in a simple, sustainable and cost-effective way. Furthermore, since the original sample is adsorbed onto a solid support, repeat confirmatory analyses on the same specimen, if needed, can be carried out

Application of benchtop total-reflection X-ray fluorescence spectrometry and chemometrics in classification of origin and type of Croatian wines

The contents of selected metals (K, Ca, Fe, Cu, Zn, Mn, Sr, Rb, Ba, Pb, Ni, Cr and V) in 70 wine samples from Continental and Adriatic part of Croatia and different types of wine (red and white) were determined by TXRF. The aim of this study was to compare the elemental composition of wines from two different regions and to determine the discriminant ability of each variable and to indicate which variables discriminate between the four categories considered. Principal component analysis and cluster analysis showed that K, Mn, Ba and Ni can be considered as the most important characteristics to distinguish between Continental red and white wines, Rb, Ni and Ba for Continental red and Adriatic red wines while Sr is the only metal that completely distinguishes the samples of each category. Finally, linear discriminant analysis showed good recognition (100%) and prediction abilities (96.43%) using these selected elements

Simple procedure for nutrient analysis of coffee plant with energy dispersive X-ray fluorescence spectrometry (EDXRF)

Nutrient analysis is used to estimate nutrient content of crop plants to manage fertilizer application for sustained crop production. Direct solid analysis of agricultural and environmental samples by energy dispersive X-ray fluorescence spectrometry (EDXRF) was chosen as alternative technique to evaluate the simultaneous multielemental quantification of the most important essential elements in coffee (Coffea arabica L.) plants. Inductively coupled plasma atomic emission spectrometry and certified reference materials made from leaves were used to calibrate and check the trueness of EDXRF method for the determination of the concentration of several nutrients in coffee leaves and branches. Fluorescence spectrometry proved to be advantageous and presented low cost as loose powder samples could be used. Samples collected from a field experiment where coffee plants were treated with excess of Ni and Zn were used to verify the practical application of the method. Good relationships were achieved between certified values and data obtained by EDXRF, with recoveries ranging from 82 to 117 %

Agronomic and environmental implications of using a By-Product of the Intermediate Tanning Processes as Nitrogen Fertilizer

ABSTRACT Nitrogen (N) is an important nutrient for agriculture, and Brazil is heavily dependent on N imports. A by-product of the intermediate processes of tanning (BPIPT) may be used as an N fertilizer which will reduce this dependency, but its chromium (Cr) content is a matter of concern. This work assessed Cr (III, VI) and N (total, inorganic) contents in four soil samples with contrasting characteristics (especially with respect to their content of manganese (Mn), a potential Cr(III) oxidant), following the addition of the BPIPT. Chemical and microbiological indicators of soil quality were measured to assess the agronomic and environmental implications of the BPIPT addition in Brazilian soils. Our results indicate that the BPIPT is a promising source of N. The originally available Mn content in the soil did not influence the effect of the BPIPT on soil Cr(VI) content. Finally, microbial activity was generally stimulated after BPIPT addition to the soil. This information is relevant because: 1) it shows that the beneficial use of the BPIPT as an N fertilizer is important for adding value to a by-product with agronomic potential; and 2) it indicates that, at the dosage of the BPIPT used in this study (2.5 g kgsoil−1), the typical increases in the soil concentration of labile Cr (0–25 mg kgsoil−1) and Cr(VI) (0–0.8 mg kgsoil−1) due to the application of the BPIPT are not detrimental to biological activity in the soil. However, further investigations are still necessary to evaluate the mobility of these Cr species in the soil and possible risks of groundwater contamination, which were not addressed in this study

Evaluation of micro-energy dispersive X-ray fluorescence and histochemical tests for aluminium detection in plants from High Altitude Rocky Complexes, Southeast Brazil

The soils developed under High Altitude Rocky Complexes in Brazil are generally of very low chemical fertility, with low base saturation and high exchangeable aluminium concentration. This stressful condition imposes evolutionary pressures that lead to ecological success of plant species that are able to tolerate or accumulate high amounts of aluminium. Several analytical methods are currently available for elemental mapping of biological structures, such as micro-X-ray fluorescence (μ-EDX) and histochemical tests. The aim of this study was to combine μ-EDX analysis and histochemical tests to quantify aluminium in plants from High Altitude Rocky Complexes, identifying the main sites for Al-accumulation. Among the studied species, five showed total Al concentration higher than 1000 mg kg−1. The main Al-hyperaccumulator plants, Lavoisiera pectinata, Lycopodium clavatum and Trembleya parviflora presented positive reactions in the histochemical tests using Chrome Azurol and Aluminon. Strong positive correlations were observed between the total Al concentrations and data obtained by μ-EDX analysis. The μ-EDX analysis is a potential tool to map and quantify Al in hyperaccumulator species, and a valuable technique due to its non-destructive capacity. Histochemical tests can be helpful to indicate the accumulation pattern of samples before they are submitted for further μ-EDX scrutiny

Determination of selenium by X-ray fluorescence spectrometry using dispersive solid-phase microextraction with multiwalled carbon nanotubes as solid sorbent

A dispersive solid-phase microextraction (DSPME) with multiwalled carbon nanotubes (MWCNTs) as solid sorbent and ammonium pyrrolidinedithiocarbamate (APDC) as chelating agent was developed for determination of selenium. In the proposed procedure, the Se(iv)-APDC complex is adsorbed on MWCNTs dispersed in aqueous samples. After the adsorption process, the aqueous samples are filtered and MWCNTs with selenium chelate are collected onto a filter. The loaded filters are directly measured using X-ray fluorescence (XRF) spectrometry. In order to obtain high recovery of the Se ions on MWCNTs, the proposed procedure was optimized for various analytical parameters such as pH, amounts of MWCNTs and APDC, sample volume and time of the sorption process. Under optimized conditions Se ions can be determined with very good recovery (97 ± 3%), precision (RSD = 3.2%) and detection limits (from 0.06 to 0.2 ng mL -1, depending on counting time and XRF equipment). The effect of common coexisting ions was also investigated. Se(iv) can be determined in the presence of heavy metal ions and alkali metals. The chemical interferences observed for high concentrations of Cu(ii), Fe(iii), and Zn(ii) can be completely eliminated using precipitation with NaOH. The proposed method was applied for the determination of Se in mineral water and biological samples (Lobster Hepatopancreas). The proposed method can also be applied for selenium speciation. The concentration of selenate can be obtained as the difference between the concentration of selenite after and before prereduction of selenate to selenite. © 2012 The Royal Society of Chemistry.This work was supported by the Spanish National Research Program (project ref. CGL2010-22168-C3-01).Peer Reviewe

Analytical capabilities of laboratory, benchtop and handheld X-ray fluorescence systems for detection of metals in aqueous samples pre-concentrated with solid-phase extraction disks

Abstract: We aimed to achieve improved instrumental sensitivity and detection limits for the analysis of several elements (Cu, Ni, Zn, Pb and Cd) in aqueous samples with energy dispersive X-ray fluorescence spectrometry (EDXRF). The metals were pre-concentrated from aqueous solutions using commercially available organic-based solid-phase extraction (SPE) disks functionalized with iminodiacetate groups. These thin-layer organic materials provide an ideal support for XRF analysis. The elements were collected on the SPE extraction disks using a simple filtration procedure (starting with 1 L of aqueous sample) that allows direct XRF measurements to be performed in the field (in situ). We evaluated the analytical possibilities and drawbacks of using this pre-concentration procedure in combination with the following XRF configurations: a handheld unit, a benchtop EDXRF system and a high-energy polarized-beam EDXRF instrument (HE-P-EDXRF). Using the HE-P-EDXRF system, the detection limits for all metals were more than one order of magnitude lower than those attained using handheld and benchtop EDXRF instrumentation. For the detection of metal concentrations higher than similar to 20 mu g/L, however, handheld or benchtop systems remain a very good option due to their extreme simplicity of operation and low-cost, compact design. We demonstrate the application of these methodologies, using the three equipment systems, to the analysis of trace concentrations of metals in different types of aqueous samples, including tap water and waste water. (C) 2011 Elsevier B.V. All rights reserved