Ultrasonication-assisted synthesis of 2D porous MoS2/GO nanocomposite catalysts as high-performance hydrodesulfurization catalysts of vacuum gasoil: Experimental and DFT study

In this study, a novel, simple, high yield, and scalable method is proposed to synthesize highly porous MoS2/graphene oxide (M−GO) nanocomposites by reacting the GO and co-exfoliation of bulky MoS2 in the presence of polyvinyl pyrrolidone (PVP) under different condition of ultrasonication. Also, the effect of ultrasonic output power on the particle size distribution of metal cluster on the surface of nanocatalysts is studied. It is found that the use of the ultrasonication method can reduce the particle size and increase the specific surface area of M−GO nanocomposite catalysts which leads to HDS activity is increased. These nanocomposite catalysts are characterized by XRD, Raman spectroscopy, SEM, STEM, HR-TEM, AFM, XPS, ICP, BET surface, TPR and TPD techniques. The effects of physicochemical properties of the M−GO nanocomposites on the hydrodesulfurization (HDS) reactions of vacuum gas oil (VGO) has been also studied. Catalytic activities of MoS2-GO nanocomposite are investigated by different operating conditions. M9-GO nanocatalyst with high surface area (324 m2/g) and large pore size (110.3 Å), have the best catalytic performance (99.95%) compared with Co-Mo/γAl2O3 (97.91%). Density functional theory (DFT) calculations were also used to elucidate the HDS mechanism over the M−GO catalyst. It is found that the GO substrate can stabilize MoS2 layers through weak van der Waals interactions between carbon atoms of the GO and S atoms of MoS2. At both Mo- and S-edges, the direct desulfurization (DDS) is found as the main reaction pathway for the hydrodesulfurization of DBT molecules

Incorporating corrosion measurement in hip wear simulators: An added complication or a necessity?

Corrosion is not routinely considered in the assessment of the degradation or the lifetime of total hip replacement bearing surfaces. Biomechanical simulations are becoming ever more complex and are taking into account motion cycles that represent activities beyond a simple walking gait at 1 Hz, marking a departure from the standard ISO BS 14242. However, the degradation is still very often referred to as wear, even though the material loss occurs due to a combination of tribological and corrosion processes and their interactions. This article evaluates how, by incorporating real-time corrosion measurements in total hip replacement simulations, pre-clinical evaluations and research studies can both yield much more information and accelerate the process towards improved implants

How does study quality affect the results of a diagnostic meta-analysis?

Background: The use of systematic literature review to inform evidence based practice in diagnostics is rapidly expanding. Although the primary diagnostic literature is extensive, studies are often of low methodological quality or poorly reported. There has been no rigorously evaluated, evidence based tool to assess the methodological quality of diagnostic studies. The primary objective of this study was to determine the extent to which variations in the quality of primary studies impact the results of a diagnostic meta-analysis and whether this differs with diagnostic test type. A secondary objective was to contribute to the evaluation of QUADAS, an evidence-based tool for the assessment of quality in diagnostic accuracy studies. Methods: This study was conducted as part of large systematic review of tests used in the diagnosis and further investigation of urinary tract infection (UTI) in children. All studies included in this review were assessed using QUADAS, an evidence-based tool for the assessment of quality in systematic reviews of diagnostic accuracy studies. The impact of individual components of QUADAS on a summary measure of diagnostic accuracy was investigated using regression analysis. The review divided the diagnosis and further investigation of UTI into the following three clinical stages: diagnosis of UTI, localisation of infection, and further investigation of the UTI. Each stage used different types of diagnostic test, which were considered to involve different quality concerns. Results: Many of the studies included in our review were poorly reported. The proportion of QUADAS items fulfilled was similar for studies in different sections of the review. However, as might be expected, the individual items fulfilled differed between the three clinical stages. Regression analysis found that different items showed a strong association with test performance for the different tests evaluated. These differences were observed both within and between the three clinical stages assessed by the review. The results of regression analyses were also affected by whether or not a weighting (by sample size) was applied. Our analysis was severely limited by the completeness of reporting and the differences between the index tests evaluated and the reference standards used to confirm diagnoses in the primary studies. Few tests were evaluated by sufficient studies to allow meaningful use of meta-analytic pooling and investigation of heterogeneity. This meant that further analysis to investigate heterogeneity could only be undertaken using a subset of studies, and that the findings are open to various interpretations. Conclusion: Further work is needed to investigate the influence of methodological quality on the results of diagnostic meta-analyses. Large data sets of well-reported primary studies are needed to address this question. Without significant improvements in the completeness of reporting of primary studies, progress in this area will be limited

Quality of care for hypertension in the United States

BACKGROUND: Despite heavy recent emphasis on blood pressure (BP) control, many patients fail to meet widely accepted goals. While access and adherence to therapy certainly play a role, another potential explanation is poor quality of essential care processes (QC). Yet little is known about the relationship between QC and BP control. METHODS: We assessed QC in 12 U.S. communities by reviewing the medical records of a randomly selected group of patients for the two years preceding our study. We included patients with either a diagnosis of hypertension or two visits with BPs of ≥140/90 in their medical records. We used 28 process indicators based on explicit evidence to assess QC. The indicators covered a broad spectrum of care and were developed through a modified Delphi method. We considered patients who received all indicated care to have optimal QC. We defined control of hypertension as BP < 140/90 in the most recent reading. RESULTS: Of 1,953 hypertensive patients, only 57% received optimal care and 42% had controlled hypertension. Patients who had received optimal care were more likely to have their BP under control at the end of the study (45% vs. 35%, p = .0006). Patients were more likely to receive optimal care if they were over age 50 (76% vs. 63%, p < .0001), had diabetes (77% vs. 71%, p = .0038), coronary artery disease (87% vs. 69%, p < .0001), or hyperlipidemia (80% vs. 68%, p < .0001), and did not smoke (73% vs. 66%, p = .0005). CONCLUSIONS: Higher QC for hypertensive patients is associated with better BP control. Younger patients without cardiac risk factors are at greatest risk for poor care. Quality measurement systems like the one presented in this study can guide future quality improvement efforts

B cell–intrinsic signaling through IL-21 receptor and STAT3 is required for establishing long-lived antibody responses in humans

Engagement of cytokine receptors by specific ligands activate Janus kinase–signal transducer and activator of transcription (STAT) signaling pathways. The exact roles of STATs in human lymphocyte behavior remain incompletely defined. Interleukin (IL)-21 activates STAT1 and STAT3 and has emerged as a potent regulator of B cell differentiation. We have studied patients with inactivating mutations in STAT1 or STAT3 to dissect their contribution to B cell function in vivo and in response to IL-21 in vitro. STAT3 mutations dramatically reduced the number of functional, antigen (Ag)-specific memory B cells and abolished the ability of IL-21 to induce naive B cells to differentiate into plasma cells (PCs). This resulted from impaired activation of the molecular machinery required for PC generation. In contrast, STAT1 deficiency had no effect on memory B cell formation in vivo or IL-21–induced immunoglobulin secretion in vitro. Thus, STAT3 plays a critical role in generating effector B cells from naive precursors in humans. STAT3-activating cytokines such as IL-21 thus underpin Ag-specific humoral immune responses and provide a mechanism for the functional antibody deficit in STAT3-deficient patients