Golden gravitational lensing systems from the Sloan Lens ACS Survey. II. SDSS J1430+4105: A precise inner total mass profile from lensing alone

We study the SLACS strong lensing system SDSSJ1430+4105 at z=0.285. The lensed source (z=0.575) of this system has a complex morphology with several subcomponents. Its subcomponents span a radial range from 4 to 10kpc in the lens plane. Therefore we can constrain the slope of the total projected mass profile around the Einstein radius (R_E) from lensing alone. We measure a density profile that is slightly but not significantly shallower than isothermal at R_E. We decompose the mass of the lensing galaxy into a de Vaucouleurs (deV) component to trace the stars and an additional dark component. The spread of multiple image components over a large radial range also allows us to determine the amplitude of the deV and dark matter components separately. We get a mass to light ratio of M_deV/L_B~5.5\pm1.5M/L_sun,B and a dark matter fraction within R_E of ~20 to 40%. Modelling the star formation history assuming composite stellar populations at solar metallicity to the galaxy's photometry yields a mass to light ratio of M_star,salp/L_B~4.0_{-1.3}^{+0.6}M/L_sun,B and M_star,chab/L_B~2.3_{-0.8}^{+0.3}M/L_sun,B for Salpeter and Chabrier IMFs, respectively. Hence, the mass to light ratio derived from lensing is more Salpeter-like, in agreement with results for massive Coma galaxies and other nearby massive early type galaxies. We examine the consequences of the galaxy group in which the lensing galaxy is embedded, showing that it has little influence on the mass to light ratio obtained for the deV component of the lensing galaxy. Finally, we decompose the projected, azimuthally averaged 2D density distribution of the deV and dark matter component of the lensing signal into spherically averaged 3D density profiles. We can show that the 3D dark and luminous matter density within R_E~0.6R_eff of this SLACS galaxy is similar to the values of Coma galaxies with the same velocity dispersions.Comment: 24 pages, 21 figures, 11 tables, accepted for publication by MNRA

Assessment of Dermatoglyphic Patterns and Sex Distribution in Esan Ethnic Group of Edo State, Nigeria

This study was carried out to find out the possibility of a unique pattern of palm and finger prints (Dermatoglyphics) among 192 adults (96 males and 96 females) of Esan origin who, at the time of this study, were residing in Esan-land - the central senatorial district of Edo state, Nigeria. The subjects were selected via multi-stage sampling technique and fingerprint determination was performed using the Indian ink methods. Palm and fingerprints were observed for the angles connecting the triradii at the roots of the fingers (a-index finger, b-middle finger, c-ring finger d-small finger and t-the most proximal triradii in the palm) taken as atd, tad and tda angles. The data collected were statistically analyzed using the Statistical Package for Social Science (SPSS) using the student t-test, chi square test and ANOVA as statistical tools. Results showed that the loop pattern had the highest frequency (61.7%) followed by whorl (24.9%), arch (12.8%) and double whorl (0.6%). The mean atd angles were 43.49 for males and 44.02 for females; tad angles were 75.11 for males and 74.71 % for females; and tda were 61.22% for males and 61.35% females. These reveals that the pattern of finger prints distribution were similar for both sexes except that the males had more arches on the right hand (53%) than the females with more arches on the left hand (57.1%).Keywords: Esan people, Dematoglyphic Patterns, Finger Prints, Pal

Ametryn removal by Metarhizium brunneum: Biodegradation pathway proposal and metabolic background revealed

Ametryn is a representative of a class of s-triazine herbicides absorbed by plant roots and leaves and characterized as a photosynthesis inhibitor. It is still in use in some countries in the farming of pineapples, soybean, corn, cotton, sugar cane or bananas; however, due to the adverse effects of s-triazine herbicides on living organisms use of these pesticides in the European Union has been banned. In the current study, we characterized the biodegradation of ametryn (100 mg L-1) by entomopathogenic fungal cosmopolite Metarhizium brunneum. Ametryn significantly inhibited the growth and glucose uptake in fungal cultures. The concentration of the xenobiotic drops to 87.75 mg L-1 at the end of culturing and the biodegradation process leads to formation of four metabolites: 2-hydroxy atrazine, ethyl hydroxylated ametryn, S-demethylated ametryn and deethylametryn. Inhibited growth is reflected in the metabolomics data, where significant differences in concentrations of L-proline, gamma-aminobutyric acid, L-glutamine, 4-hydroxyproline, L-glutamic acid, ornithine and L-arginine were observed in the presence of the xenobiotic when compared to control cultures. The metabolomics data demonstrated that the presence of ametryn in the fungal culture induced oxidative stress and serious disruptions of the carbon and nitrogen metabolism. Our results provide deeper insights into the microorganism strategy for xenobiotic biodegradation which may result in future enhancements to ametryn removal by the tested strain.National Science Center, Poland (Project No. 2015/19/B/NZ9/00167

Habitat fragmentation and the future structure of tree assemblages in a fragmented Atlantic forest landscape

The biodiversity value of human-modified landscapes has become a central question in the tropical forest conservation biology, yet the degree to which plant populations and communities are restructured in response to environmental change remains unclear. Here, we address tree species density in a fragmented Atlantic forest landscape to test the hypothesis that tree assemblages inhabiting edge-dominated forest habitats approach typical conditions of early successional systems. Seedlings and adults from 141 tree species were sampled across 39 0.1-ha plots: 19 in small fragments (55 % of all tree species exhibiting higher densities in small fragments than in mature forest, particularly pioneers (>60 % of all species). Seedlings and adults of these proliferating species differed from species exhibiting population declines in terms of wood density and seed size, respectively. Additionally, pioneers were more abundant than shade-tolerant species, as were hardwood species in the case of seedlings. Tree species showing highest population increases consisted largely of long-lived, light-demanding canopy species bearing soft or hardwood and small-to-medium-sized seeds. Tree assemblage structure also differed in terms of forest habitats with small forest fragments supporting few rare species, whereas the most rapidly proliferating species were much more widespread and abundant in fragments. However, 60 % of all adult pioneer species recorded in small fragments were not recorded as seedlings in this habitat type, although both seedling and adult assemblages were dominated by pioneer species. Edge-dominated tree assemblages are likely to experience long-term shifts toward greater dominance of long-lived, pioneer canopy species

Gap width modification on fully screen-printed coplanar Zn|MnO2 batteries

Fully printed primary zinc-manganese dioxide (Zn|MnO2) batteries in coplanar configuration were fabricated by sequential screen printing. While electrode dimensions and transferred active masses were kept at constant levels, electrode separating gaps were incrementally enlarged from 1 mm to 5 mm. Calendering of solely zinc anodes increased interparticle contact of active material within the electrodes while the porosity of manganese dioxide based electrodes was maintained by non-calendering. Chronopotentiometry revealed areal capacities for coplanar batteries up to 2.8 mAh cm−2. Galvanostatic electrochemical impedance spectroscopy measurements and short circuit measurements were used to comprehensively characterise the effect of gap width extension on bulk electrolyte resistance and charge transfer resistance values. Linear relationships between nominal gap widths, short circuit currents and internal resistances were evidenced, but showed only minor impact on actual discharge capacities. The findings contradict previous assumptions to minimise gap widths of printed coplanar batteries to a sub-millimetre range in order to retain useful discharge capacities. The results presented in this study may facilitate process transfer of printed batteries to an industrial environment

Connections between Alternative Transcription and Alternative Splicing in Mammals

The majority of mammalian genes produce multiple transcripts resulting from alternative splicing (AS) and/or alternative transcription initiation (ATI) and alternative transcription termination (ATT). Comparative analysis of the number of alternative nucleotides, isoforms, and introns per locus in genes with different types of alternative events suggests that ATI and ATT contribute to the diversity of human and mouse transcriptome even more than AS. There is a strong negative correlation between AS and ATI in 5′ untranslated regions (UTRs) and AS in coding sequences (CDSs) but an even stronger positive correlation between AS in CDSs and ATT in 3′ UTRs. These observations could reflect preferential regulation of distinct, large groups of genes by different mechanisms: 1) regulation at the level of transcription initiation and initiation of translation resulting from ATI and AS in 5′ UTRs and 2) posttranslational regulation by different protein isoforms. The tight linkage between AS in CDSs and ATT in 3′ UTRs suggests that variability of 3′ UTRs mediates differential translational regulation of alternative protein forms. Together, the results imply coordinate evolution of AS and alternative transcription, processes that occur concomitantly within gene expression factories

Propeller‐Like Nanorod‐Upconversion Nanoparticle Assemblies with Intense Chiroptical Activity and Luminescence Enhancement in Aqueous Phase

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/133596/1/adma201601261-sup-0001-S1.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/133596/2/adma201601261_am.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/133596/3/adma201601261.pd

The stellar and sub-stellar IMF of simple and composite populations

The current knowledge on the stellar IMF is documented. It appears to become top-heavy when the star-formation rate density surpasses about 0.1Msun/(yr pc^3) on a pc scale and it may become increasingly bottom-heavy with increasing metallicity and in increasingly massive early-type galaxies. It declines quite steeply below about 0.07Msun with brown dwarfs (BDs) and very low mass stars having their own IMF. The most massive star of mass mmax formed in an embedded cluster with stellar mass Mecl correlates strongly with Mecl being a result of gravitation-driven but resource-limited growth and fragmentation induced starvation. There is no convincing evidence whatsoever that massive stars do form in isolation. Various methods of discretising a stellar population are introduced: optimal sampling leads to a mass distribution that perfectly represents the exact form of the desired IMF and the mmax-to-Mecl relation, while random sampling results in statistical variations of the shape of the IMF. The observed mmax-to-Mecl correlation and the small spread of IMF power-law indices together suggest that optimally sampling the IMF may be the more realistic description of star formation than random sampling from a universal IMF with a constant upper mass limit. Composite populations on galaxy scales, which are formed from many pc scale star formation events, need to be described by the integrated galactic IMF. This IGIMF varies systematically from top-light to top-heavy in dependence of galaxy type and star formation rate, with dramatic implications for theories of galaxy formation and evolution.Comment: 167 pages, 37 figures, 3 tables, published in Stellar Systems and Galactic Structure, Vol.5, Springer. This revised version is consistent with the published version and includes additional references and minor additions to the text as well as a recomputed Table 1. ISBN 978-90-481-8817-

Measurement of D-s(+) and D-s(*+) production in B meson decays and from continuum e(+)e(-) annihilation at √s=10.6 GeV

This is the pre-print version of the Article. The official published version can be accessed from the links below. Copyright @ 2002 APSNew measurements of Ds+ and Ds*+ meson production rates from B decays and from qq̅ continuum events near the Υ(4S) resonance are presented. Using 20.8 fb-1 of data on the Υ(4S) resonance and 2.6 fb-1 off-resonance, we find the inclusive branching fractions B(B⃗Ds+X)=(10.93±0.19±0.58±2.73)% and B(B⃗Ds*+X)=(7.9±0.8±0.7±2.0)%, where the first error is statistical, the second is systematic, and the third is due to the Ds+→φπ+ branching fraction uncertainty. The production cross sections σ(e+e-→Ds+X)×B(Ds+→φπ+)=7.55±0.20±0.34pb and σ(e+e-→Ds*±X)×B(Ds+→φπ+)=5.8±0.7±0.5pb are measured at center-of-mass energies about 40 MeV below the Υ(4S) mass. The branching fractions ΣB(B⃗Ds(*)+D(*))=(5.07±0.14±0.30±1.27)% and ΣB(B⃗Ds*+D(*))=(4.1±0.2±0.4±1.0)% are determined from the Ds(*)+ momentum spectra. The mass difference m(Ds+)-m(D+)=98.4±0.1±0.3MeV/c2 is also measured.This work was supported by DOE and NSF (USA), NSERC (Canada), IHEP (China), CEA and CNRS-IN2P3 (France), BMBF (Germany), INFN (Italy), NFR (Norway), MIST (Russia), and PPARC (United Kingdom). Individuals have received support from the Swiss NSF, A. P. Sloan Foundation, Research Corporation, and Alexander von Humboldt Foundation