67 research outputs found
Pulse processing routines for neutron time-of-flight data
A pulse shape analysis framework is described, which was developed for
n_TOF-Phase3, the third phase in the operation of the n_TOF facility at CERN.
The most notable feature of this new framework is the adoption of generic pulse
shape analysis routines, characterized by a minimal number of explicit
assumptions about the nature of pulses. The aim of these routines is to be
applicable to a wide variety of detectors, thus facilitating the introduction
of the new detectors or types of detectors into the analysis framework. The
operational details of the routines are suited to the specific requirements of
particular detectors by adjusting the set of external input parameters. Pulse
recognition, baseline calculation and the pulse shape fitting procedure are
described. Special emphasis is put on their computational efficiency, since the
most basic implementations of these conceptually simple methods are often
computationally inefficient.Comment: 13 pages, 10 figures, 5 table
Pulse processing routines for neutron time-of-flight data
A pulse shape analysis framework is described, which was developed for n_TOF-Phase3, the third phase in the operation of the n_TOF facility at CERN. The most notable feature of this new framework is the adoption of generic pulse shape analysis routines, characterized by a minimal number of explicit assumptions about the nature of pulses. The aim of these routines is to be applicable to a wide variety of detectors, thus facilitating the introduction of the new detectors or types of detectors into the analysis framework. The operational details of the routines are suited to the specific requirements of particular detectors by adjusting the set of external input parameters. Pulse recognition, baseline calculation and the pulse shape fitting procedure are described. Special emphasis is put on their computational efficiency, since the most basic implementations of these conceptually simple methods are often computationally inefficient.Croatian Science Foundation - Project No. 168
Investigation of the Pu 240 (n,f) reaction at the n_TOF/EAR2 facility in the 9 meV-6 MeV range
Background: Nuclear waste management is considered amongst the major challenges in the field of nuclear energy. A possible means of addressing this issue is waste transmutation in advanced nuclear systems, whose operation requires a fast neutron spectrum. In this regard, the accurate knowledge of neutron-induced reaction cross sections of several (minor) actinide isotopes is essential for design optimization and improvement of safety margins of such systems. One such case is 240 Pu, due to its accumulation in spent nuclear fuel of thermal reactors and its usage in fast reactor fuel. The measurement of the 240 Pu (n,f) cross section was previously attempted at the CERN n_TOF facility EAR1 measuring station using the time-of-flight technique. Due to the low amount of available material and the given flux at EAR1, the measurement had to last several months to achieve a sufficient statistical accuracy. This long duration led to detector deterioration due to the prolonged exposure to the high α activity of the fission foils, therefore the measurement could not be successfully completed.
Purpose: It is aimed to determine whether it is feasible to study neutron-induced fission at n_TOF/EAR2 and provide data on the
240 Pu(n,f) reaction in energy regions requested for applications.
Methods: The study of the 240 Pu(n,f) reaction was made at a new experimental area (EAR2) with a shorter flight path which delivered on average 30 times higher flux at fast neutron energies. This enabled the measurement to be performed much faster, thus limiting the exposure of the detectors to the intrinsic activity of the fission foils. The experimental setup was based on microbulk Micromegas detectors and the time-of-flight data were analyzed with an optimized pulse-shape analysis algorithm. Special attention was dedicated to the estimation of the non-negligible counting loss corrections with the development of a new methodology, and other corrections were estimated via Monte Carlo simulations of the experimental setup.
Results: This new measurement of the 240Pu(n,f) cross section yielded data from 9meV up to 6 MeV incident neutron energy and fission resonance kernels were extracted up to 10 keV.
Conclusions: Neutron-induced fission of high activity samples can be successfully studied at the n_TOF/EAR2 facility at CERN covering a wide range of neutron energies, from thermal to a few MeV
Na Activation Level Measurements of Fused Silica Rods in the LHC Target Absorber for Neutrals (TAN) Compared to FLUKA Simulations
The Target Absorbers for Neutrals (TANs) are located in a high-intensity
radiation environment inside the tunnel of the Large Hadron Collider (LHC).
TANs are positioned about m downstream from the beam interaction points.
Seven cm long fused silica rods with different dopant specifications were
irradiated in the TAN by the Beam RAte of Neutrals (BRAN) detector group during
+ data taking from 2016 to 2018 at the LHC. The peak dose delivered to
the fused silica rods was MGy. We report measurements of the Na
activation of the fused silica rods carried out at the University of Illinois
at Urbana-Champaign and Argonne National Laboratory. At the end of the
irradiation campaign, the maximum Na activity observed was
kBq corresponding to a density, , of Na nuclei. FLUKA Monte Carlo simulations have been performed
by the CERN FLUKA team to estimate Na activities for the irradiated BRAN
rod samples. The simulations reproduce the Na activity profile measured
along the rods, with a 35% underestimation of the experimental measurement
results.Comment: 11 pages, 14 figures, to be submitted to PRA
Technical Proposal for FASER: ForwArd Search ExpeRiment at the LHC
FASER is a proposed small and inexpensive experiment designed to search for
light, weakly-interacting particles during Run 3 of the LHC from 2021-23. Such
particles may be produced in large numbers along the beam collision axis,
travel for hundreds of meters without interacting, and then decay to standard
model particles. To search for such events, FASER will be located 480 m
downstream of the ATLAS IP in the unused service tunnel TI12 and be sensitive
to particles that decay in a cylindrical volume with radius R=10 cm and length
L=1.5 m. FASER will complement the LHC's existing physics program, extending
its discovery potential to a host of new, light particles, with potentially
far-reaching implications for particle physics and cosmology.
This document describes the technical details of the FASER detector
components: the magnets, the tracker, the scintillator system, and the
calorimeter, as well as the trigger and readout system. The preparatory work
that is needed to install and operate the detector, including civil
engineering, transport, and integration with various services is also
presented. The information presented includes preliminary cost estimates for
the detector components and the infrastructure work, as well as a timeline for
the design, construction, and installation of the experiment.Comment: 82 pages, 62 figures; submitted to the CERN LHCC on 7 November 201
Optical Transmission Characterization of Fused Silica Materials Irradiated at the CERN Large Hadron Collider
The Target Absorbers for Neutrals (TANs) represent one of the most
radioactive regions in the Large Hadron Collider (LHC). Seven 40 cm long fused
silica rods with different dopant specifications, manufactured by Heraeus, were
irradiated in one of the TANs located around the ATLAS experiment by the Beam
RAte of Neutrals (BRAN) detector group. This campaign took place during the Run
2 p+p data taking, which occurred between 2016 and 2018. This paper reports a
complete characterization of optical transmission per unit length of irradiated
fused silica materials as a function of wavelength (240 nm - 1500 nm), dose (up
to 18 MGy), and level of OH and H dopants introduced in the manufacturing
process. The dose delivered to the rods was estimated using Monte Carlo
simulations performed by the CERN FLUKA team.Comment: 29 pages, 15 figures, to be submitted to NIM-
Further studies on the physics potential of an experiment using LHC neutrinos
We discuss an experiment to investigate neutrino physics at the LHC, with emphasis on tau flavour. As described in our previous paper Beni et al (2019 J. Phys. G: Nucl. Part. Phys. 46 115008), the detector can be installed in the decommissioned TI18 tunnel, ≈ 480 m downstream the ATLAS cavern, after the first bending dipoles of the LHC arc. The detector intercepts the intense neutrino flux, generated by the LHC beams colliding in IP1, at large pseudorapidity η, where neutrino energies can exceed a TeV. This paper focuses on exploring the neutrino pseudorapity versus energy phase space available in TI18 in order to optimize the detector location and acceptance for neutrinos originating at the pp interaction point, in contrast to neutrinos from pion and kaon decays. The studies are based on the comparison of simulated pp collisions at √s = 13 TeV: PYTHIA events of heavy quark (c and b) production, compared to DPMJET minimum bias events (including charm) with produced particles traced through realistic LHC optics with FLUKA. Our studies favour a configuration where the detector is positioned off the beam axis, slightly above the ideal prolongation of the LHC beam from the straight section, covering 7.4 < η < 9.2. In this configuration, the flux at high energies (0.5-1.5 TeV and beyond) is found to be dominated by neutrinos originating directly from IP1, mostly from charm decays, of which ∼50% are electron neutrinos and ∼5% are tau neutrinos. The contribution of pion and kaon decays to the muon neutrino flux is found small at those high energies. With 150 f b-1 of delivered LHC luminosity in Run 3 the experiment can record a few thousand very high energy neutrino charged current (CC) interactions and over 50 tau neutrino CC events. These events provide useful information in view of a high statistics experiment at HL-LHC. The electron and muon neutrino samples can extend the knowledge of the charm PDF to a new region of x, which is dominated by theory uncertainties. The tau neutrino sample can provide first experience on reconstruction of tau neutrino events in a very boosted regime
FACET : a new long-lived particle detector in the very forward region of the CMS experiment
We describe a proposal to add a set of very forward detectors to the CMS experiment for the high-luminosity era of the Large Hadron Collider to search for beyond the standard model long-lived particles, such as dark photons, heavy neutral leptons, axion-like particles, and dark Higgs bosons. The proposed subsystem is called FACET for Forward-Aperture CMS ExTension, and will be sensitive to any particles that can penetrate at least 50 m of magnetized iron and decay in an 18 m long, 1 m diameter vacuum pipe. The decay products will be measured in detectors using identical technology to the planned CMS Phase-2 upgrade.Peer reviewe
Cross section measurements of 155,157Gd(n, γ) induced by thermal and epithermal neutrons
© SIF, Springer-Verlag GmbH Germany, part of Springer Nature 2019Neutron capture cross section measurements on 155Gd and 157Gd were performed using the time-of-flight technique at the n_TOF facility at CERN on isotopically enriched samples. The measurements were carried out in the n_TOF experimental area EAR1, at 185 m from the neutron source, with an array of 4 C6D6 liquid scintillation detectors. At a neutron kinetic energy of 0.0253 eV, capture cross sections of 62.2(2.2) and 239.8(8.4) kilobarn have been derived for 155Gd and 157Gd, respectively, with up to 6% deviation relative to values presently reported in nuclear data libraries, but consistent with those values within 1.6 standard deviations. A resonance shape analysis has been performed in the resolved resonance region up to 181 eV and 307 eV, respectively for 155Gd and 157Gd, where on average, resonance parameters have been found in good agreement with evaluations. Above these energies and up to 1 keV, the observed resonance-like structure of the cross section has been analysed and characterised. From a statistical analysis of the observed neutron resonances we deduced: neutron strength function of 2. 01 (28) × 10 - 4 and 2. 17 (41) × 10 - 4; average total radiative width of 106.8(14) meV and 101.1(20) meV and s-wave resonance spacing 1.6(2) eV and 4.8(5) eV for n + 155Gd and n + 157Gd systems, respectively.Peer reviewedFinal Accepted Versio
- …