526 research outputs found
On the finding of the Indo-Pacific fish Scomberomorus commerson in Rhodes (Greece)
The occurrence of the Indo-Pacific fish Scomberomorus commerson was observed for the first time in the Hellenic waters of the SE Aegean Sea during the spring 2008. The record may represent a first indication of a population expansion of this alien species along the southern coasts of the Aegean Sea
Diffusion-emission theory of photon enhanced thermionic emission solar energy harvesters
Numerical and semi-analytical models are presented for
photon-enhanced-thermionic-emission (PETE) devices. The models take diffusion
of electrons, inhomogeneous photogeneration, and bulk and surface recombination
into account. The efficiencies of PETE devices with silicon cathodes are
calculated. Our model predicts significantly different electron affinity and
temperature dependence for the device than the earlier model based on a
rate-equation description of the cathode. We show that surface recombination
can reduce the efficiency below 10% at the cathode temperature of 800 K and the
concentration of 1000 suns, but operating the device at high injection levels
can increase the efficiency to 15%.Comment: 5 pages, 4 figure
Gonioinfradens paucidentatus (A. Milne Edwards, 1861) (Crustacea, Decapoda, Portunidae): a new alien crab in the Mediterranean Sea
The first record for the Mediterranean Sea of the Red Sea/Indo-Pacific portunid Gonioinfradens paucidentatus (red swimming crab) is documented. A detailed description of the specimens collected at Rodos Island (southeastern Aegean Sea) is given, while possible introduction vectors of the species in the area are discussed
Instabilities at a sheared interface over a liquid laden with soluble surfactant
The linear stability of a semi-infinite fluid undergoing a shearing motion over a fluid layer that is laden with soluble surfactant and that is bounded below by a plane wall is investigated under conditions of Stokes flow. While it is known that this configuration is unstable in the presence of an insoluble surfactant, it is shown via a linear stability analysis that surfac-tant solubility has a stabilising effect on the flow. As the solubility increases, large wavelength perturbations are stabilised first, leaving open the possibility of mid-wave instability for moderate surfactant solubilities, and the flow is fully stabilised when the solubility exceeds a threshold value. The predictions of the linear stability analysis are supported by an energy budget analysis which is also used to determine the key physical effects responsible for the (de)stabilisation. Asymptotic expansions performed for long-wavelength perturbations turn out to be non-uniform in the insoluble surfactant limit. In keeping with the findings for insoluble surfactant obtained by Pozrikidis & Hill [24], the presence of the wall is found to be a crucial factor in the instability
1,2,6-thiadiazinones as novel narrow spectrum calcium/calmodulin-dependent protein kinase kinase 2 (CaMKK2) inhibitors
We demonstrate for the first time that 4H-1,2,6-thiadiazin-4-one (TDZ) can function as a chemotype for the design of ATP-competitive kinase inhibitors. Using insights from a co-crystal structure of a 3,5-bis(arylamino)-4H-1,2,6-thiadiazin-4-one bound to calcium/calmodulin-dependent protein kinase kinase 2 (CaMKK2), several analogues were identified with micromolar activity through targeted displacement of bound water molecules in the active site. Since the TDZ analogues showed reduced promiscuity compared to their 2,4-dianilinopyrimidine counter parts, they represent starting points for development of highly selective kinase inhibitors
Validated TRNSYS model for forced circulation solar water heating systems with flat plate and heat pipe evacuated tube collectors
A coupled optical-thermal-electrical model to predict the performance of hybrid PV/T-CCPC roof-top systems
A crossed compound parabolic concentrator (CCPC) is applied into a photovoltaic/thermal (PV/T) hybrid solar collector, i.e. concentrating PV/T (CPV/T) collector, to develop new hybrid roof-top CPV/T systems. However, to optimise the system configuration and operational parameters as well as to predict their performances, a coupled optical, thermal and electrical model is essential. We establish this model by integrating a number of submodels sourced from literature as well as from our recent work on incidence-dependent optical efficiency, six-parameter electrical model and scaling law for outdoor conditions. With the model, electrical performance and cell temperature are predicted on specific days for the roof-top systems installed in Glasgow, Penryn and Jaen. Results obtained by the proposed model reasonably agree with monitored data and it is also clarified that the systems operate under off-optimal operating condition. Long-term electric performance of the CPV/T systems is estimated as well. In addition, effects of transient terms in heat transfer and diffuse solar irradiance on electric energy are identified and discussed
A tool to minimize the need of Monte Carlo ray tracing code for 3D finite volume modelling of a standard parabolic trough collector receiver under a realistic solar flux profile
© 2020 The Authors. Energy Science & Engineering published by the Society of Chemical Industry and John Wiley & Sons Ltd. The energy collection element of a parabolic trough collector includes a selective coated metallic receiver tube inside an evacuated glass tube. Perpendicularly incident sun light on the parabolic trough mirror aperture is concentrated on the receiver tube highly nonuniformly along its circular direction. This solar energy is collected as thermal energy circulating a suitable heat transfer fluid (HTF) through the tube. This conjugate heat transfer phenomenon under nonuniform heat flux boundary condition is computationally studied applying 3D finite volume (FV) modelling technique of computational fluid dynamics coupled with Monte Carlo ray tracing (MCRT) optical data. The MCRT model simulates the actual flux profile around the receiver tube. Apart from a FV model, this coupled study requires expertise in, and access to, a suitable MCRT code. A combination of polynomial correlations and user-defined function (UDF) is introduced in this article in order to minimize the need of MCRT codes from subsequent FV modelling of the receiver tube of the Luz Solar 2 (LS2) collector. The correlations are developed from a verified 3D MCRT model, which is equivalent to the local irradiation data as a function of receiver circular location. The UDF includes two algorithms: one to develop solar flux profile from the correlations around the receiver, and the other to calculate heat loss from the receiver. Interpreting the UDF into ANSYS Fluent, a 3D FV model of the LS2 receiver is developed and validated with experimental results. The effectiveness of the UDF as an alternative to MCRT code is verified. The FV model is capable to investigate the heat transfer characteristics of the LS2 collector receiver at different solar irradiation level, optical properties of the collector components, glass tube conditions, HTFs, inserts or swirl generators, collector length, and internal diameter of the tube
Numerical Experiments on Extreme Waves Through Oblique–Soliton Interactions
Extreme water-wave motion is investigated analytically and numerically by considering two-soliton and three-soliton interactions on a horizontal plane. We successfully determine numerically that soliton solutions of the unidirectional Kadomtsev–Petviashvili equation (KPE), with equal far-field individual amplitudes, survive reasonably well in the bidirectional and higher-order Benney–Luke equations (BLE). A well-known exact two-soliton solution of the KPE on the infinite horizontal plane is used to seed the BLE at an initial time, and we confirm that the KPE-fourfold amplification approximately persists. More interestingly, a known three-soliton solution of the KPE is analysed further to assess its eight- or ninefold amplification, the latter of which exists in only a special and difficult-to-attain limit. This solution leads to an extreme splash at one point in space and time. Subsequently, we seed the BLE with this three-soliton solution at a suitable initial time to establish the maximum amplification: it is approximately 7.8 for a KPE amplification of 8.4. Herein, the computational domain and solutions are truncated approximately to a fully periodic or half-periodic channel geometry of sufficient size, essentially leading to cnoidal-wave solutions. Moreover, special geometric (finite-element) variational integrators in space and time have been used in order to eradicate artificial numerical damping of, in particular, wave amplitude
Protect the natives to combat the aliens: Could octopus vulgaris cuvier, 1797 be a natural agent for the control of the lionfish invasion in the mediterranean sea?
[No abstract available
- …