Effects of different long-term soil management systems on some physical and chemical properties and crop production in soils in Berlin-Dahlem and Dedelow- Zalf Müncheberg (Germany)

Soil management systems influence the agricultural system as they have in short- and long term period different effects on soil physical and chemical properties, therefore influencing the efficiency of production as well. A well directed choice of tillage equipments leads to a better soil protection and enables a higher fertility which is an important requirement for sustainable agriculture. The aim of this study is to investigate the effects of different soil management systems on some physical and chemical properties and the crop production of these sandy soils. This study demonstrates the first results obtained from the year 2006, performed on the long-term land use experiment with the effects of three different factors (deep and shallow tillage; 17 and 28 cm, lime application; +Ca and –Ca and Farmyard manure; +FYM and –FYM) in Berlin-Dahlem (Germany), Humboldt University of Berlin and the ZALF experimental station at Dedelow (Germany) in 5 different tillage systems (no-tillage, mulch; 10 cm, cultivator; 15 cm, plough; 15 cm and plough; 25 cm). The soil heterogeneity were determined and evaluated with the computer program “Surfer” depending on the different depths of the sand and loam layers. The penetration resistances of both experimental fields showed that the deep tillage systems caused a higher compacted zone in deeper soil layers. It was found that there are significant differences in the soil aggregate stability and pH values between the shallow and deep tillage systems in Berlin-Dahlem. The pH values were significantly higher in the deep tillage systems. The soil organic matter contents were found higher in the deep tillage systems but there were no significant differences. There were also no significant differences in grain yield between these two tillage systems in Berlin-Dahlem

Self-organization of (001) cubic crystal surfaces

Self-organization on crystal surface is studied as a two dimensional spinodal decomposition in presence of a surface stress. The elastic Green function is calculated for a $(001)$ cubic crystal surface taking into account the crystal anisotropy. Numerical calculations show that the phase separation is driven by the interplay between domain boundary energy and long range elastic interactions. At late stage of the phase separation process, a steady state appears with different nanometric patterns according to the surface coverage and the crystal elastic constants

Nuclear fission time measurements as a function of excitation energy - A crystal blocking experiment

CASFission times of lead and uranium nuclei have been measured at GANIL by the crystal blocking method. The inverse kinematics was used. Fragment atomic numbers and total excitation energies were determined. For data analysis, full Monte-Carlo trajectory calculations were used to simulate the blocking patterns. The effect of post-scission emissions, included in our simulations, is discussed. At high excitation energies, the scissions occur dominantly at times shorter than 10−19 s, whereas at low excitation energies (E∗<250–300 MeV), scissions occurring at much longer times with sizeable probabilities are observed both for uranium and for lead nuclei, leading to average scission times much longer than those inferred from pre-scission emission

GPS displacement dataset for the study of elastic surface mass variations

Quantification of uncertainty in surface mass change signals derived from Global Positioning System (GPS) measurements poses challenges, especially when dealing with large datasets with continental or global coverage. We present a new GPS station displacement dataset that reflects surface mass load signals and their uncertainties. We assess the structure and quantify the uncertainty of vertical land displacement derived from 3045 GPS stations distributed across the continental US. Monthly means of daily positions are available for 15 years. We list the required corrections to isolate surface mass signals in GPS estimates and screen the data using GRACE(-FO) as external validation. Evaluation of GPS time series is a critical step, which identifies (a) corrections that were missed, (b) sites that contain non-elastic signals (e.g., close to aquifers), and (c) sites affected by background modeling errors (e.g., errors in the glacial isostatic model). Finally, we quantify uncertainty of GPS vertical displacement estimates through stochastic modeling and quantification of spatially correlated errors. Our aim is to assign weights to GPS estimates of vertical displacements, which will be used in a joint solution with GRACE(-FO). We prescribe white, colored, and spatially correlated noise. To quantify spatially correlated noise, we build on the common mode imaging approach by adding a geophysical constraint (i.e., surface hydrology) to derive an error estimate for the surface mass signal. We study the uncertainty of the GPS displacement time series and find an average noise level between 2 and 3 mm when white noise, flicker noise, and the root mean square (rms) of residuals about a seasonality and trend fit are used to describe uncertainty. Prescribing random walk noise increases the error level such that half of the stations have noise &gt; 4 mm, which is systematic with the noise level derived through modeling of spatially correlated noise. The new dataset is available at https://doi.org/10.5281/zenodo.8184285 (Peidou et al., 2023) and is suitable for use in a future joint solution with GRACE(-FO)-like observations.</p

The suppression of fluorescence peaks in energy-dispersive X-ray diffraction

A novel method to separate diffraction and fluorescence peaks in energy- dispersive X-ray diffraction (EDXRD) is described. By tuning the excitation energy of an X-ray tube source to just below an elemental absorption edge, the corresponding fluorescence peaks of that element are completely suppressed in the resulting spectrum. Since Bremsstrahlung photons are present in the source spectrum up to the excitation energy, any diffraction peaks that lie at similar energies to the suppressed fluorescence peaks are uncovered. This technique is an alternative to the more usual method in EDXRD of altering the scattering angle in order to shift the energies of the diffraction peaks. However, in the back-reflection EDXRD technique [Hansford (2011). J. Appl. Cryst. 44, 514–525] changing the scattering angle would lose the unique property of insensitivity to sample morphology and is therefore an unattractive option. The use of fluorescence suppression to reveal diffraction peaks is demonstrated experimentally by suppressing the Ca K fluorescence peaks in the back-reflection EDXRD spectra of several limestones and dolomites. Three substantial benefits are derived: uncovering of diffraction peak(s) that are otherwise obscured by fluorescence; suppression of the Ca K escape peaks; and an increase in the signal-to-background ratio. The improvement in the quality of the EDXRD spectrum allows the identification of a secondary mineral in the samples, where present. The results for a pressed-powder pellet of the geological standard JDo-1 (dolomite) show the presence of crystallite preferred orientation in this prepared sample. Preferred orientation is absent in several unprepared limestone and dolomite rock specimens, illustrating an advantage of the observation of rocks in their natural state enabled by back-reflection EDXRD

Hybrid crystalline-ITO/metal nanowire mesh transparent electrodes and their application for highly flexible perovskite solar cells

Here, we propose crystalline indium tin oxide/metal nanowire composite electrode (c-ITO/metal NW-GFRHybrimer) films as a robust platform for flexible optoelectronic devices. A very thin c-ITO overcoating layer was introduced to the surface-embedded metal nanowire (NW) network. The c-ITO/metal NW-GFRHybrimer films exhibited outstanding mechanical flexibility, excellent optoelectrical properties and thermal/chemical robustness. Highly flexible and efficient metal halide perovskite solar cells were fabricated on the films. The devices on the c-ITO/AgNW- and c-ITO/CuNW-GFRHybrimer films exhibited power conversion efficiency values of 14.15% and 12.95%, respectively. A synergetic combination of the thin c-ITO layer and the metal NW mesh transparent conducting electrode will be beneficial for use in flexible optoelectronic applications

Identification and design principles of low hole effective mass p-type transparent conducting oxides

The development of high-performance transparent conducting oxides is critical to many technologies from transparent electronics to solar cells. Whereas n-type transparent conducting oxides are present in many devices, their p-type counterparts are not largely commercialized, as they exhibit much lower carrier mobilities due to the large hole effective masses of most oxides. Here we conduct a high-throughput computational search on thousands of binary and ternary oxides and identify several highly promising compounds displaying exceptionally low hole effective masses (up to an order of magnitude lower than state-of-the-art p-type transparent conducting oxides), as well as wide band gaps. In addition to the discovery of specific compounds, the chemical rationalization of our findings opens new directions, beyond current Cu-based chemistries, for the design and development of future p-type transparent conducting oxides.United States. Office of Naval Research (Award N00014-11-1-0212