The prismatic Sigma 3 (10-10) twin bounday in alpha-Al2O3 investigated by density functional theory and transmission electron microscopy

The microscopic structure of a prismatic $\Sigma 3$ $(10\bar{1}0)$ twin boundary in \aal2o3 is characterized theoretically by ab-initio local-density-functional theory, and experimentally by spatial-resolution electron energy-loss spectroscopy in a scanning transmission electron microscope (STEM), measuring energy-loss near-edge structures (ELNES) of the oxygen $K$-ionization edge. Theoretically, two distinct microscopic variants for this twin interface with low interface energies are derived and analysed. Experimentally, it is demonstrated that the spatial and energetical resolutions of present high-performance STEM instruments are insufficient to discriminate the subtle differences of the two proposed interface variants. It is predicted that for the currently developed next generation of analytical electron microscopes the prismatic twin interface will provide a promising benchmark case to demonstrate the achievement of ELNES with spatial resolution of individual atom columns

p53 mutant His175 identified in a newly established fallopian tube carcinoma cell line secreting interleukin 6

AbstractFallopian tube carcinoma is a lethal gynecologic malignancy. Etiologic factors are unknown. No experimental data on molecular alterations exist so far. For an in vitro model, we established the permanent human tubal carcinoma cell line FT-MZ-1. The median doubling time was 14 days with 24.2% in S phase. A point missense mutation of the p53 tumor suppressor gene resulting in the His175 mutant was identified. Aberrant p53 protein accumulated in nucleus and cytoplasm. FT-MZ-1 substantially secreted interleukin 6 (Il-6) coinciding with the inactivation of p53 as a transrepressor on the Il-6 gene promoter

Geometric reconstruction methods for electron tomography

Electron tomography is becoming an increasingly important tool in materials science for studying the three-dimensional morphologies and chemical compositions of nanostructures. The image quality obtained by many current algorithms is seriously affected by the problems of missing wedge artefacts and nonlinear projection intensities due to diffraction effects. The former refers to the fact that data cannot be acquired over the full $180^\circ$ tilt range; the latter implies that for some orientations, crystalline structures can show strong contrast changes. To overcome these problems we introduce and discuss several algorithms from the mathematical fields of geometric and discrete tomography. The algorithms incorporate geometric prior knowledge (mainly convexity and homogeneity), which also in principle considerably reduces the number of tilt angles required. Results are discussed for the reconstruction of an InAs nanowire

Mechanical properties of mesoporous ceria nanoarchitectures

Architectural constructs are engineered to impart desirable mechanical properties facilitating bridges spanning a thousand meters and buildings nearly 1 km in height. However, do the same 'engineering-rules' translate to the nanoscale, where the architectural features are less than 0.0001 mm in size? Here, we calculate the mechanical properties of a porous ceramic functional material, ceria, as a function of its nanoarchitecture using molecular dynamics simulation and predict its yield strength to be almost two orders of magnitude higher than the parent bulk material. In particular, we generate models of nanoporous ceria with either a hexagonal or cubic array of one-dimensional pores and simulate their responses to mechanical load. We find that the mechanical properties are critically dependent upon the orientation between the crystal structure (symmetry, direction) and the pore structure (symmetry, direction). This journal i

Electron irradiation induced nanocrystal formation in Cu-borosilicate glass

Nanoscale writing of Cu nanoparticles in glasses is introduced using focused electron irradiation by transmission electron microscopy. Two types of copper borosilicate glasses, one with high and another with low Cu loading, have been tested at energies of 200–300 keV, and formation of Cu nanoparticles in a variety of shapes and sizes using different irradiation conditions is achieved. Electron energy loss spectroscopy analysis, combined with high-resolution transmission electron microscopy imaging, confirmed the irradiation-induced precipitated nanoparticles as metallic, while furnace annealing of the glass triggered dendrite-shaped particles of copper oxide. Unusual patterns of nanoparticle rings and chains under focused electron beam irradiation are also presented. Conclusively, electron beam patterning of Cu-loaded glasses is a promising alternative route to well-established femtosecond laser photoreduction of Cu ions in glass

Zn nanodot patterning in borosilicate glasses by electron irradiation

Metallic zinc nanoparticles are generated in two compositional ranges of borosilicate glasses upon 200 and 300 keV electron beam irradiation in a transmission electron microscope. Irradiation effects are studied either with a stationary electron beam as a time series or with spatially varying beams for line-scan patterning. The size of the zinc nanodots formed is inversely related to the distance from the center of the electron beam, and growth from 5 to 50 nm over time via ripening can be observed. Line-scan patterning via both thermal gun and field emission gun electron irradiation has been successfully achieved. Our findings also show the occurrence of self-organized particle ordering, such as formation of chains. Metal nanoparticles have a tendency to migrate toward the glass fragment center, unless high intensity radiation ablates the glass matrix, when Zn particles remain decorating the surface. High-resolution lattice imaging, scanning transmission electron microscopy, and electron energy loss spectroscopy are used to confirm particle identity

Comparison of nanoparticular hydroxyapatite pastes of different particle content and size in a novel scapula defect model

Nanocrystalline hydroxyapatite (HA) has good biocompatibility and the potential to support bone formation. It represents a promising alternative to autologous bone grafting, which is considered the current gold standard for the treatment of low weight bearing bone defects. The purpose of this study was to compare three bone substitute pastes of different HA content and particle size with autologous bone and empty defects, at two time points (6 and 12 months) in an ovine scapula drillhole model using micro-CT, histology and histomorphometry evaluation. The nHA-LC (38% HA content) paste supported bone formation with a high defect bridging-rate. Compared to nHA-LC, Ostim(®) (35% HA content) showed less and smaller particle agglomerates but also a reduced defect bridging-rate due to its fast degradation The highly concentrated nHA-HC paste (48% HA content) formed oversized particle agglomerates which supported the defect bridging but left little space for bone formation in the defect site. Interestingly, the gold standard treatment of the defect site with autologous bone tissue did not improve bone formation or defect bridging compared to the empty control. We concluded that the material resorption and bone formation was highly impacted by the particle-specific agglomeration behaviour in this study

Mechanical properties of ceria nanorods and nanochains; The effect of dislocations, grain-boundaries and oriented attachment

We predict that the presence of extended defects can reduce the mechanical strength of a ceria nanorod by 70%. Conversely, the pristine material can deform near its theoretical strength limit. Specifically, atomistic models of ceria nanorods have been generated with full microstructure, including: growth direction, morphology, surface roughening (steps, edges, corners), point defects, dislocations and grain-boundaries. The models were then used to calculate the mechanical strength as a function of microstructure. Our simulations reveal that the compressive yield strengths of ceria nanorods, ca. 10 nm in diameter and without extended defects, are 46 and 36 GPa for rods oriented along [211] and [110] respectively, which represents almost 10% of the bulk elastic modulus and are associated with yield strains of about 0.09. Tensile yield strengths were calculated to be about 50% lower with associated yield strains of about 0.06. For both nanorods, plastic deformation was found to proceed via slip in the {001} plane with direction ã??110ã?? - a primary slip system for crystals with the fluorite structure. Dislocation evolution for the nanorod oriented along [110] was nucleated via a cerium vacancy present at the surface. A nanorod oriented along [321] and comprising twin-grain boundaries with {111} interfacial planes was calculated to have a yield strength of about 10 GPa (compression and tension) with the grain boundary providing the vehicle for plastic deformation, which slipped in the plane of the grain boundary, with an associated ã??110ã?? slip direction. We also predict, using a combination of atomistic simulation and DFT, that rutile-structured ceria is feasible when the crystal is placed under tension. The mechanical properties of nanochains, comprising individual ceria nanoparticles with oriented attachment and generated using simulated self-assembly, were found to be similar to those of the nanorod with grain-boundary. Images of the atom positions during tension and compression are shown, together with animations, revealing the mechanisms underpinning plastic deformation. For the nanochain, our simulations help further our understanding of how a crystallising ice front can be used to 'sculpt' ceria nanoparticles into nanorods via oriented attachment. © 2011 The Royal Society of Chemistry

Effect of treatment with epoetin beta on short-term tumour progression and survival in anaemic patients with cancer: a meta-analysis

To assess the early effect of epoetin beta on survival and tumour progression in anaemic patients with cancer, data were pooled from nine randomised clinical trials comparing epoetin beta with placebo or standard care. Studies were not primarily designed to assess these end points. Follow-up was for treatment duration plus 4 weeks following therapy completion. All adverse events (AEs) were retrospectively reviewed blinded, for progression. Thromboembolic events were also assessed. Data analysis involved standard statistical tests. Overall, 1413 patients were included (epoetin beta, n=800; control, n=613; 56% haematological, and 44% solid). Median initial epoetin beta dose was 30 000 IU/week. Overall survival during months 0–6 was similar with epoetin beta and control (0.31 vs 0.32 deaths/patient-year). No increased mortality risk was seen with epoetin beta (relative risk (RR) 0.97, 95% CI: 0.69, 1.36; P=0.87). There was a significantly reduced risk of rapidly progressive disease for epoetin beta (RR 0.78, 95% CI: 0.62, 0.99; P=0.042). Epoetin beta was associated with a slightly higher frequency of thromboembolic events vs control (5.9% vs 4.2% of patients) but thromboembolic-related mortality was identical in both groups (1.1%). Epoetin beta provided a slight beneficial effect on tumour progression and did not impact on early survival or thromboembolic-related mortality