1,033 research outputs found
Fish assemblages associated with natural and anthropogenically-modified habitats in a marine embayment: Comparison of baited videos and opera-house traps
Marine embayments and estuaries play an important role in the ecology and life history of many fish species. Cockburn Sound is one of a relative paucity of marine embayments on the west coast of Australia. Its sheltered waters and close proximity to a capital city have resulted in anthropogenic intrusion and extensive seascape modification. This study aimed to compare the sampling efficiencies of baited videos and fish traps in determining the relative abundance and diversity of temperate demersal fish species associated with naturally occurring (seagrass, limestone outcrops and soft sediment) and modified (rockwall and dredge channel) habitats in Cockburn Sound. Baited videos sampled a greater range of species in higher total and mean abundances than fish traps. This larger amount of data collected by baited videos allowed for greater discrimination of fish assemblages between habitats. The markedly higher diversity and abundances of fish associated with seagrass and limestone outcrops, and the fact that these habitats are very limited within Cockburn Sound, suggests they play an important role in the fish ecology of this embayment. Fish assemblages associated with modified habitats comprised a subset of species in lower abundances when compared to natural habitats with similar physical characteristics. This suggests modified habitats may not have provided the necessary resource requirements (e.g. shelter and/or diet) for some species, resulting in alterations to the natural trophic structure and interspecific interactions. Baited videos provided a more efficient and non-extractive method for comparing fish assemblages and habitat associations of smaller bodied species and juveniles in a turbid environment
Wigner crystalization about =3
We measure a resonance in the frequency dependence of the real diagonal
conductivity, Re[], near integer filling factor, . This
resonance depends strongly on , with peak frequency
GHz at or 2.92 close to integer , but 600 MHz
at or 2.82, the extremes of where the resonance is visible.
The dependence of upon , the density of electrons in the
partially filled level, is discussed and compared with similar measurments by
Chen {\it et al.}\cite{yong} about and 2. We interpret the resonance as
due to a pinned Wigner crystal phase with density about the
state.Comment: for proceedings of EP2DS-15 (Nara) to appear in Physica
Optimisation of Grease Application to Railway Track
Trackside lubricators are designed to deliver grease to passing wheel flanges to reduce wheel and rail wear on curves. Ensuring that they are set up to deliver sufficient grease for the range of vehicles passing a site can be a challenge. For example, vehicle dynamics modelling and site investigations have shown that the wheels of passenger vehicles do not run as close to the rail face as those of freight vehicles, meaning that they are less likely to contact the grease and lubricate subsequent curves. To investigate the effects of different trackside devices, and the influence of parameters governing grease pickup, including lateral wheel displacement and pump durations, a bespoke test rig was built at the University of Sheffield. The rig used a scaled wheel, a short section of rail and a modern trackside lubricator set-up. Experiments involving different lateral wheel displacements and pumping durations were carried out, in addition to the visualisation of the size of the grease bulb. This showed how a grease bulb grows. It also indicated that a worn profile is likely to require greater wheel displacement to make contact with grease bulbs when compared to a new wheel profile. The experimental results showed that increasing pickup of grease can be expected when an additional component called a GreaseGuide™ was fitted to a regular grease delivery unit (GDU) on the rail. The efficiency of grease pickup was investigated, and test results exploring increasing pump durations have indicated a relationship between pickup and bulb size. To validate the use of the scaled rig, similar tests were carried out using a full-scale test rig. The full-scale results were compared to the experimental results of the scaled wheel rig. This showed that whilst there were differences between the two test rigs in absolute values and anomalous results, overall trends were the same on both test scales. The effect of temperature on bulb size and pumpability of grease was also investigated. This work can be extended further by using the same method to investigate other parameters that affect the lubrication of curves. This can lead to optimised lubricator set-up to ensure that the track is fully lubricated all the time
Recommended from our members
Accuracy of finite-element models for the stress analysis of multiple-holed moderator blocks
Two steps have been taken to quantify and improve the accuracy in the analysis. First, the limitations of various approximation techniques have been studied with the aid of smaller benchmark problems containing fewer holes. Second, a new family of computer programs has been developed for handling such large problems. This paper describes the accuracy studies and the benchmark problems. A review is given of some proposed modeling techniques including local mesh refinement, homogenization, a special-purpose finite element, and substructuring. Some limitations of these approaches are discussed. The new finite element programs and the features that contribute to their efficiency are discussed. These include a standard architecture for out-of-core data processing and an equation solver that operates on a peripheral array processor. The central conclusions of the paper are: (1) modeling approximation methods such as local mesh refinement and homogenization tend to be unreliable, and they should be justified by a fine mesh benchmark analysis; and (2) finite element codes are now available that can achieve accurate solutions at a reasonable cost, and there is no longer a need to employ modeling approximations in the two-dimensional analysis of HTGR fuel elements. 10 figures
An Experimental Study of Individual Air Bubble Entrainment at a Planar Plunging Jet
At the impact of a plunging liquid jet with a receiving pool, air bubbles may be entrained if the impact velocity exceeds a critical velocity. New experiments were performed in a two-dimensional plunging jet. The flow conditions near the inception of air entrainment were investigated. Two mechanisms of air entrainment were visualized at low jet velocities: by elongated air cavity and by foam bubble s. The breakage of entrained air bubbles was studied also. The results highlight that the bubble breakage process depends critically upon the initial bubble size
The celebrity entrepreneur on television: profile, politics and power
This article examines the rise of the ‘celebrity entrepreneur’ on television through the emergence of the ‘business entertainment format’ and considers the ways in which regular television exposure can be converted into political influence. Within television studies there has been a preoccupation in recent years with how lifestyle and reality formats work to transform ‘ordinary’ people into celebrities. As a result, the contribution of vocationally skilled business professionals to factual entertainment programming has gone almost unnoticed. This article draws on interviews with key media industry professionals and begins by looking at the construction of entrepreneurs as different types of television personalities and how discourses of work, skill and knowledge function in business shows. It then outlines how entrepreneurs can utilize their newly acquired televisual skills to cultivate a wider media profile and secure various forms of political access and influence. Integral to this is the centrality of public relations and media management agencies in shaping media discourses and developing the individual as a ‘brand identity’ that can be used to endorse a range of products or ideas. This has led to policy makers and politicians attempting to mobilize the media profile of celebrity entrepreneurs to reach out and connect with the public on business and enterprise-related issues
Dynamical Dark Energy model parameters with or without massive neutrinos
We use WMAP5 and other cosmological data to constrain model parameters in
quintessence cosmologies, focusing also on their shift when we allow for
non-vanishing neutrino masses. The Ratra-Peebles (RP) and SUGRA potentials are
used here, as examples of slowly or fastly varying state parameter w(a). Both
potentials depend on an energy scale \Lambda. Here we confirm the results of
previous analysis with WMAP3 data on the upper limits on \Lambda, which turn
out to be rather small (down to ~10^{-9} in RP cosmologies and ~10^{-5} for
SUGRA). Our constraints on \Lambda are not heavily affected by the inclusion of
neutrino mass as a free parameter. On the contrary, when the neutrino mass
degree of freedom is opened, significant shifts in the best-fit values of other
parameters occur.Comment: 9 pages, 3 figures, submitted to JCA
Dynamic Changes in High-Sensitivity Cardiac Troponin I in Response to Anthracycline-Based Chemotherapy
Aims:
Treatment advances have improved cancer-related outcomes and shifted interest towards minimising long-term iatrogenic complications, particularly chemotherapy-related cardiotoxicity. High-sensitivity cardiac troponin I (hs-cTnI) assays accurately quantify very low concentrations of plasma troponin and enable early detection of cardiomyocyte injury prior to the development of myocardial dysfunction. The profile of hs-cTnI in response to anthracycline-based treatment has not previously been described.
Materials and methods:
This was a multicentre prospective observational cohort study. Female patients with newly diagnosed invasive breast cancer scheduled to receive anthracycline-based (epirubicin) chemotherapy were recruited. Blood sampling was carried out before and 24 h after each cycle. Hs-cTnI concentrations were measured using the Abbott ARCHITECTSTAT assay.
Results:
We recruited 78 women with a median (interquartile range) age of 52 (49–61) years. The median baseline troponin concentration was 1 (1–4) ng/l and the median cumulative epirubicin dose was 394 (300–405) mg/m2. Following an initial 33% fall 24 h after anthracycline dosing (P < 0.001), hs-cTnI concentrations increased by a median of 50% (P < 0.001) with each successive treatment cycle. In total, 45 patients had troponin measured immediately before the sixth treatment cycle, 21 (46.6%) of whom had hs-cTnI concentrations ≥16 ng/l, indicating myocardial injury. Plasma hs-cTnI concentrations before the second treatment cycle were a strong predictor of subsequent myocardial injury.
Conclusions:
Cardiotoxicity arising from anthracycline therapy is detectable in the earliest stages of breast cancer treatment and is cumulative with each treatment cycle. This injury is most reliably determined from blood sampling carried out before rather than after each treatment cycle
Non-Gaussianity in the Cosmic Microwave Background Anisotropies at Recombination in the Squeezed limit
We estimate analytically the second-order cosmic microwave background
temperature anisotropies at the recombination epoch in the squeezed limit and
we deduce the contamination to the primordial local non-Gaussianity. We find
that the level of contamination corresponds to f_NL^{con}=O(1) which is below
the sensitivity of present experiments and smaller than the value O(5) recently
claimed in the literature.Comment: LaTeX file; 15 pages. Slightly revised version. Main result unchange
- …