On the estimation of the bed-material transport and budget along a river segment: application to the Middle Loire River, France

Sediment load and budgets are a fundamental component of the process-based hydromorphological framework developed by the REFORM project, and are needed to accurately assess the current condition of a river, its sensitivity to change, and its likely future evolutionary trajectory. This paper presents an evaluation of three different methods for estimating both bedload sediment transport and bed-material budget within river channels, using the Middle Loire River as a case study. The first method is based on the stream power concept and does not need any hydraulic calculations. It yields estimates of the sediment transport in the same order of magnitude as measurements but poor results for the bed-material budget in terms of magnitude and tendency. For the second method, hydraulic parameters are computed using the Manning–Strickler equation (or a 1D hydraulic model for steady flow). It provides useful indicators for understanding river dynamics but does not yield significant improvements compared to the first method. The third method uses 1D numerical software for water flow and river bed evolution. It yields the most accurate results for both sediment transport and bed evolution but requires more data and overall more work to construct the model. Guidance is provided on the amount of data required, the competence needed to build the models, and the predictive capability of each of the methods

A multidating approach applied to historical slackwater flood deposits of the Gardon River, SE France

A multidating approach was carried out on slackwater flood deposits, preserved in valley side rock cave and terrace, of the Gardon River in Languedoc, southeast France. Lead-210, caesium-137, and geochemical analysis of mining-contaminated slackwater flood sediments have been used to reconstruct the history of these flood deposits. These age controls were combined with the continuous record of Gardon flow since 1890, and the combined records were then used to assign ages to slackwater deposits. The stratigraphic records of terrace GE and cave GG were excellent examples to illustrate the effects of erosion/preservation in a context of a progressively self-censoring, vertically accreting sequence. The sedimentary flood record of the terrace GE located at 10 m above the channel bed is complete for years post-1958 but incomplete before. During the 78-year period 1880-1958, 25 floods of a sufficient magnitude (> 1450 m3/s) have covered the terrace. Since 1958, however, the frequency of inundation of the deposits has been lower:only 5 or 6 floods in 52 years have been large enough to exceed the necessary threshold discharge (> 1700 m3/s). The progressive increase of threshold discharge and the reduced frequency of inundation at the terrace could allow stabilisation of the vegetation cover and improved protection against erosion from subsequent large magnitude flood events. The sedimentary flood record seems complete for cave GG located at 15 m above the channel bed. Here, the low frequency of events would have enabled a high degree of stabilisation of the sedimentary flood record, rendering the deposits less susceptible to erosion. Radiocarbon dating are used in this study and compared to the other dating techniques.Eighty percent of radiocarbon dates on charcoals were considerably older than those obtained by the other techniques in the terrace. On the other hand, radiocarbon dating on seeds provided better results. This discrepancy between radiocarbon dates on charcoal and seeds is explained by the nature of the dated material (permanent wood vs. annual production and resistance to degradation process). Finally, we showed in this study that although the most common dating technique used in paleoflood hydrology is radiocarbon dating, usually on charcoal preserved within slackwater flood sediments, this method did not permitus to define a coherent age model. Only the combined use of lead-210, caesium-137, and geochemical analysis of mining-contaminated sediments with the instrumental flood record can be applied to discriminate and date the recent slackwater deposits of the terrace GE and cave GG.Une approche par datations multiples a été menée sur les dépôts de sédiments de crue retrouvés dans les gorges du Gardon (Languedoc). Le plomb-210, le césium-137 et l’analyse géochimique des sédiments contaminés par les mines ont été utilisés pour reconstruire l’histoire des dépôts de crue. Cette approche a été combinée avec l’historique des crues du Gardon depuis 1890 pour affiner l’approche géochronologique. Au niveau de la cavité GG et de la terrasse GE les analyses ont permis d’illustrer les mécanismes d’érosion-redéposition pouvant perturber les séquences de sédiments. Les enregistrements des dépôts de sédiments de crue sont complets sur la terrasse GE située à 10 m au-dessus du lit mineur à partir de 1958, et incomplets auparavant. Sur la période 1880-1958, 25 crues ont eu un débit suffisant (>1450 m3/s) pour recouvrir la terrasse, alors que l’on recense seulement 5 à 6 crues depuis 1958 (pour un débit de submersion supérieur à 1700 m3/s). L’augmentation progressive du débit de submersion et la fréquence moindre d’inondation de la terrasse ont pu permettre sur la période récente la stabilisation de la couche de surface par la végétation et limiter l’érosion lors de crues importantes. Les enregistrements semblent complets dans la cavité GG située à 15 m au-dessus du lit mineur. La fréquence moindre de submersion à ce niveau plus élevé peut expliquer une meilleure stabilisation des dépôts de crue, rendus moins vulnérables à l’érosion. La datation au radiocarbone a été testée même si elle ne permet pas de dater avec précision les dépôts de crue des derniers siècles. Sur la terrasse GE, 80% des dates au carbone 14 sur charbon de bois sont beaucoup trop vieilles par rapport aux autres techniques de datation, ce qui peut s’expliquer par une remobilisation/déstockage de charbons de bois anciens. Les datations radiocarbone sur graines donnent de meilleurs résultats, car issues d’une production annuelle, plus facilement décomposable et moins sujette à des dépôts intermédiaires. Au final, il apparaît que la technique de datation par radiocarbone sur des charbons de bois retrouvés dans les séquences sédimentaires n’est pas fiable, alors qu’elle est la plus pratiquée en paléo-hydrologie. L’utilisation combinée du plomb-210, du césium-137, de l’analyse géochimique des sédiments et des informations sur les crues historiques a permis de discriminer et de dater les différents dépôts de crue de ce dernier siècle dans la cavité GG et la terrasse GE

Effect of nanostructuration on compressibility of cubic BN

Compressibility of high-purity nanostructured cBN has been studied under quasi-hydrostatic conditions at 300 K up to 35 GPa using diamond anvil cell and angle-dispersive synchrotron X-ray powder diffraction. A data fit to the Vinet equation of state yields the values of the bulk modulus B0 of 375(4) GPa with its first pressure derivative B0' of 2.3(3). The nanometer grain size (\sim20 nm) results in decrease of the bulk modulus by ~9%

A hierarchical multi-scale framework and indicators of hydromorphological processes and forms

Background and Introduction to Deliverable 2.1. Work Package 2 of REFORM focuses on hydromorphological and ecological processes and interactions within river systems with a particular emphasis on naturally functioning systems. It provides a context for research on the impacts of hydromorphological changes in Work Package 3 and for assessments of the effects of river restoration in Work Package 4. Deliverable 2.1 of Work Package 2 proposes a hierarchical framework to support river managers in exploring the causes of hydromorphological management problems and devising sustainable solutions. The deliverable has four parts. Part 1 (this volume) provides a full description of the hierarchical framework and describes ways in which each element of it can be applied to European rivers and their catchments. Part 2 includes thematic annexes which provide more detailed information on some specific aspects of the framework described in Part 1. Part 3 includes catchment case studies which present the application of the entire framework described in Part 1 to a set of European catchments located in different biogeographical zones. Part 4 includes catchment case studies which present a partial application of the framework described in Part 1 to a further set of European catchments.European Commission within the 7th Framework Programme (2007 – 2013

A multi-scale hierarchical framework for developing understanding of river behaviour to support river management

The work leading to this paper was funded through the European Union’s FP7 programme under Grant Agreement No. 282656 (REFORM). The framework methodology was developed within the context of Deliverable D2.1 of the REFORM programme, and all partners who contributed to the development of the four parts of this deliverable are included in the author list of this paper. More details on the REFORM framework can be obtained from part 1 of Deliverable D2.1 (Gurnell et al. 2014), which is downloadable from http://​www.​reformrivers.​eu/​results/​deliverables

Performance of Ti/Pt and Nb/BDD anodes for dechlorination of nitric acid and regeneration of silver(II) in a tubular reactor for the treatment of solid wastes in nuclear industry

One of the problems frequently encountered in the processing of nuclear fuels is the recovery of plutonium contained in various solid wastes. The difficulty is to make soluble the plutonium present as the refractory oxide PuO2. The dissolution of this oxide in nitric acid solutions is easily performed by means of silver(II) a strong oxidizing agent which is usually electrochemically generated on a platinum anode. However, certain solid residues that must be treated to separate actinides contain important quantities of chloride ions that require after dissolution in nitric acid a preliminary electrochemical step to be removed before introducing Ag(I) for Ag(II) electrogeneration. Research is conducted to find electrocatalytic materials being able to replace massive platinum in view to limit capital costs. In the present work a set-up including a two-compartment tubular reactor with recirculation of electrolytes was tested with anodes made of boron doped diamond coated niobium (Nb/BDD) and platinum coated titanium (Ti/Pt) grids for the removal of chlorides (up to 0.1 M) and for silver(II) regeneration. The study showed that these two anodes are effective for the removal of chlorides contained in 6 M HNO3 solution as gaseous chlorine, without producing the unwanted oxyanions of chlorine. Furthermore, the regeneration rate of silver(II) on Nb/BDD anode is approximately equal to that obtained on Ti/Pt anode for the same hydrodynamic conditions in the tubular reactor. Accordingly, dechlorination as well as silver(II) regeneration can be performed in the same reactor equipped either with a Nb/BDD or a Ti/Pt anode. Besides, the service life of Nb/BDD anodes estimated by accelerated life tests conducted in 6 M HNO3 can be considered as very satisfactory compared to that observed with Ti/Pt anodes

HighP–TNano-Mechanics of Polycrystalline Nickel

We have conducted highP–Tsynchrotron X-ray and time-of-flight neutron diffraction experiments as well as indentation measurements to study equation of state, constitutive properties, and hardness of nanocrystalline and bulk nickel. Our lattice volume–pressure data present a clear evidence of elastic softening in nanocrystalline Ni as compared with the bulk nickel. We show that the enhanced overall compressibility of nanocrystalline Ni is a consequence of the higher compressibility of the surface shell of Ni nanocrystals, which supports the results of molecular dynamics simulation and a generalized model of a nanocrystal with expanded surface layer. The analytical methods we developed based on the peak-profile of diffraction data allow us to identify “micro/local” yield due to high stress concentration at the grain-to-grain contacts and “macro/bulk” yield due to deviatoric stress over the entire sample. The graphic approach of our strain/stress analyses can also reveal the corresponding yield strength, grain crushing/growth, work hardening/softening, and thermal relaxation under highP–Tconditions, as well as the intrinsic residual/surface strains in the polycrystalline bulks. From micro-indentation measurements, we found that a low-temperature annealing (T < 0.4 Tm) hardens nanocrystalline Ni, leading to an inverse Hall–Petch relationship. We explain this abnormal Hall–Petch effect in terms of impurity segregation to the grain boundaries of the nanocrystalline Ni