Evaluation of Surface Microtopography Engineered by Direct Laser Interference for Bacterial Anti-Biofouling

© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. Modification of the biomaterial surface topography is a promising strategy to prevent bacterial adhesion and biofilm formation. In this study, we use direct laser interference patterning (DLIP) to modify polystyrene surface topography at sub-micrometer scale. The results revealed that three-dimensional micrometer structures have a profound impact on bacterial adhesion. Thus, line- and pillar-like patterns enhanced S. aureus adhesion, whereas complex lamella microtopography reduced S. aureus adhesion in static and continuous flow culture conditions. Interestingly, lamella-like textured surfaces retained the capacity to inhibit S. aureus adhesion both when the surface is coated with human serum proteins and when the material is implanted subcutaneously in a foreign-body associated infection model.J. Valle was supported by Spanish Ministry of Science and Innovation “Ramón y Cajal” contract. This research was supported by grants AGL2011-23954 and BIO2011-30503-C02-02 from the Spanish Ministry of Economy and Competitivity and IIQ14066. RI1 from Innovation Department of the Government of Navarra. A. Lasagni, D. Langhenirich, and R. Helbig thank the Deutsche Forschungsgemeinschaft (DFG) for the financial support of the project “Mechanically stable anti-adhesive polymer surfaces” (LA-2513 4-1).Peer Reviewe

Das Vertical Gradient Freeze-Verfahren ohne Tiegelkontakt

In der vorliegenden Arbeit werden wissenschaftlich-technologische Untersuchungen zur wandabgelösten VGF-Züchtung von Germanium präsentiert. Dazu wurden zwei Varianten mit Hinblick auf die Etablierung und Stabilisierung bestimmter Druckverhältnisse angewendet: (i) Beim passiven dVGF-Verfahren erfolgt die Erzeugung der Druckdifferenz über die thermische Beeinflussung des Inertgases Ar, und (ii) beim erstmals gezeigten aktiven dVGF-Verfahren über eine temperaturkontrollierte, separate Zn-Dampfdruckquelle. Ge-Einkristalle mit einem Durchmesser bis zu 3 Zoll wurden nahezu vollständig ohne Tiegelkontakt gezüchtet. Der Effekt der Wandablösung wird anhand der mikroskopischen Charakterisierung der Kristalloberfläche, der Durchbiegung der Phasengrenze sowie der etch pit density (EPD), ein Maß für die Versetzungsdichte gezeigt. Im Vergleich zu konventionell gezüchteten VGF-Kristallen zeigen die detached gezüchteten Kristalle eine hohe strukturelle Qualität. Dies wird auf reduzierte thermische und thermo-mechanische Spannungen bei der wandabgelösten Züchtung zurückgeführt

Das Vertical Gradient Freeze-Verfahren ohne Tiegelkontakt

In der vorliegenden Arbeit werden wissenschaftlich-technologische Untersuchungen zur wandabgelösten VGF-Züchtung von Germanium präsentiert. Dazu wurden zwei Varianten mit Hinblick auf die Etablierung und Stabilisierung bestimmter Druckverhältnisse angewendet: (i) Beim passiven dVGF-Verfahren erfolgt die Erzeugung der Druckdifferenz über die thermische Beeinflussung des Inertgases Ar, und (ii) beim erstmals gezeigten aktiven dVGF-Verfahren über eine temperaturkontrollierte, separate Zn-Dampfdruckquelle. Ge-Einkristalle mit einem Durchmesser bis zu 3 Zoll wurden nahezu vollständig ohne Tiegelkontakt gezüchtet. Der Effekt der Wandablösung wird anhand der mikroskopischen Charakterisierung der Kristalloberfläche, der Durchbiegung der Phasengrenze sowie der etch pit density (EPD), ein Maß für die Versetzungsdichte gezeigt. Im Vergleich zu konventionell gezüchteten VGF-Kristallen zeigen die detached gezüchteten Kristalle eine hohe strukturelle Qualität. Dies wird auf reduzierte thermische und thermo-mechanische Spannungen bei der wandabgelösten Züchtung zurückgeführt

Evaluation of Surface Microtopography Engineered by Direct Laser Interference for Bacterial Anti-Biofouling

Póster presentado en la 7th ASM Conference on Biofilms, celebrada en Chicago del 24 al 29 de octubre 2015.Peer Reviewe

Control of cell growth direction by direct fabrication of periodic micro- and submicrometer arrays on polymers

In this work, we describe a laser-assisted microstructuring technique called Direct Laser Interference Patterning to produce topographical cues for tumor cells in a one-step process. Line-like patterns with spatial periods ranging from 500 nm to 10 μm are fabricated on polyimide (PI) films. The resulting structures exhibit a well-defined shape and quality even for patterns with small periodic distances. Subsequently, the behavior of mouse mammary adenocarcinoma cells over those structures is evaluated. The results show that cell growth is well aligned to the direction of the patterns (over 60% lying within 0° to 15°to either side of the surface lines) for all evaluated structure sizes. Moreover, cells grown on patterns with 500 nm spatial period are the most narrowly aligned (up to 80% found between 0°and 15°), showing the potential of the technique. The fabrication process of the PI patterns is supported by a mathematical model of the underlying photo-chemical ablation process.Fil: Langheinrich, Denise. Fraunhofer Institute for Material and Beam Technology; AlemaniaFil: Yslas, Edith Inés. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas, Fisicoquímicas y Naturales. Departamento de Biología Molecular. Sección Química Biológica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Broglia, Martin Federico. Universidad Nacional de Río Cuarto; Argentina. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados; ArgentinaFil: Rivarola, Viviana. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Departamento de Biología Molecular; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Acevedo, Diego Fernando. Universidad Nacional de Río Cuarto; Argentina. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados; ArgentinaFil: Lasagni, Andrés. Fraunhofer Institute for Material and Beam Technology; Alemani

Bringing the direct laser interference patterning method to industry: A one tool-complete solution for surface functionalization

Direct Laser Interference Patterning is an emerging technology capable to produce micro- and nanostructured surfaces on a wide variety of materials. Although, this method has shown to be capable to produce functionalized surfaces in a one-step process, it will have impact on real applications only if compact systems and solutions are developed. This study shows recent developments of interference patterning optical heads capable to produce periodic patterns at high fabrication speeds (0.1 - 5 m(2)/min) as well as to solutions to be integrated in roll-to-roll processes. A concept of an interference patterning system (DLIP-mu Fab) is also described. Application examples showing control of tribological properties of 100Cr6 steel, cell orientation on patterned polyimide surface as well as the fabrication of high resolution decorative elements are discussed

Rapid Fabrication of Periodic Patterns on Poly(styrene-co-acrylonitrile) Surfaces Using Direct Laser Interference Patterning

Periodic microstructures in styrene-acrylonitrile (SAN) copolymers are fabricated by two-beam direct laser interference patterning using a nanosecond pulsed laser operating at a wavelength of 266 nm. The SAN copolymers are synthesized using different molar ratios (styrene to acrylonitrile) by a free radical polymerization process. The chemical composition of the copolymers and their properties are determined using Fourier transformed infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). Depending on the composition of the irradiated copolymer films, with weight ratios ranging from 58 to 96.5% of styrene to acrylonitrile, different ablation behaviors are observed. The laser fluence necessary to locally ablate the copolymer is found to be dependent on the copolymer composition. Unlike other dielectric polymers, the laser irradiation produced both direct ablation of the irradiated material and collapse of the surface. It is shown that, by varying the laser fluence and the copolymer composition, the surface structure can be changed from a periodic pattern with a swelled topography to an ablated-like structure. The number of holes does not depend monotonically on the amount of PS or PAN units but shows a more complex behavior which depends on the copolymer composition and the laser fluence

Evaluation of surface microtopography engineered by direct laser interference for bacterial anti-biofouling

Modification of the biomaterial surface topography is a promising strategy to prevent bacterial adhesion and biofilm formation. In this study, we use direct laser interference patterning (DLIP) to modify polystyrene surface topography at sub-micrometer scale. The results revealed that three-dimensional micrometer structures have a profound impact on bacterial adhesion. Thus, line- and pillar-like patterns enhanced S. aureus adhesion, whereas complex lamella microtopography reduced S. aureus adhesion in static and continuous flow culture conditions. Interestingly, lamella-like textured surfaces retained the capacity to inhibit S. aureus adhesion both when the surface is coated with human serum proteins and when the material is implanted subcutaneously in a foreign-body associated infection model