6,017 research outputs found
Prospects of detecting massive isosinglet neutrino at LHC in the CMS detector
A possibility to search for a heavy isosinglet (sterile) neutrino using its
decay mode in the - channel production in the CMS experiment is studied. The only
assumption about the heavy neutrino is its nonzero mixing with or
. The corresponding CMS discovery potential expressed in terms of
the heavy neutrino mass and the mixing parameter between the heavy and light
neutrino is determined. It is shown that the heavy neutrino with a mass up to
800 could be detected in CMS. We also investigate the production of the
heavy neutrino mixed with and/or in the model through the reaction with the same heavy neutrino decay channel as
above. We find that for it is possible to discover the heavy
neutrino with a mass up to .Comment: 14 pages, 13 figure
Improving rock classification in terms of explosivity
Purpose. To improve rock classification in terms of explosivity relying upon the detailed analysis of characteristics of rating classifications available in the Russian Federation and in the world.
Methods. Complex approach has been applied involving comparison of sizes of particle-size fractions determined in terms of both national and the world standards; information gathering and processing as for the available classifications intended to identify difficulties of rock explosivity; compilation of comparative systematic of classifications or methods being considered.
Findings. Both national and the world rock classifications in terms of explosivity have been considered. While comparing national classifications as for the difficulties of rock mass failure (i.e. explosivity), a comparative table has been compiled where the most popular rock classifications are compared. Analysis of the world practices, concerning compilation of rock classifications in terms of explosivity, has shown that their approaches differ from Russian ones slightly. In the first instance, they are empiric dependences being calculated for each rock mass type separately in any single case. It has been determined that geomechanical classification of D. Lobshir (MRMR) is the most popular and rating world system to evaluate rock explosivity. It has been demonstrated that while compiling such classifications, foreign scientific writers put an emphasis on physical and mechanical indices of rocks (i.e. density, fissility, compression strength, tensile strength etc.) as well as on mine engineering ones (i.e. line of the least resistance, well diameter and depth, stope height etc.) which determines essential reliability of calculation of drilling-and-blasting parameters.
Originality. The research is the first stage of the development of the unified transition classification from Russian explosivity scales to the comparable world methodic practices as for rock mass explosivity.
Practical implications. To perform rapid transition from one explosivity classification to the other. The findings are recommended to be used while projecting drilling and blasting operations in the context of any types of minerals and in the context of academic activity.Мета. Вдосконалення класифікації гірських порід за вибуховістю на основі детального аналізу особливостей існуючих російських і закордонних рейтингових класифікацій.
Методика. Застосовано комплексний методичний підхід, що включає зіставлення розмірів гранулометричних фракцій, які визначали згідно вітчизняним і закордонним стандартам; збір та обробка інформації щодо існуючих класифікацій визначення труднощів вибуховості гірських порід; складання зіставної класифікації розглянутих класифікацій або методик.
Результати. Розглянуто вітчизняні та закордонні класифікації гірських порід за вибуховістю. При порівнянні вітчизняних класифікацій в частині труднощів руйнування гірського масиву (вибуховості) була побудована порівняльна таблиця, в якій між собою зіставляються найбільш популярні класифікації гірських порід. При аналізі закордонного досвіду складання класифікацій гірських порід за вибуховістю було виявлено, що їх мето- ди дещо відрізняються від російських, і являють собою емпіричні залежності, та розраховуються для кожного типу масиву в кожному окремому випадку індивідуально. Встановлено, що найбільш популярною і рейтинговою системою для оцінки вибуховості гірських порід за кордоном є геомеханічна класифікація Д.Х. Лабшіра (MRMR). Показано, що закордонні автори, при складанні класифікацій, роблять акцент не лише на фізико- механічних показниках гірських порід (щільності, тріщинуватості, межі міцності на стиск і розтяг і т.д.), але й на гірничотехнічних (лінія найменшого опору, діаметр та глибина свердловини, висота забою і т.д.), що визначає суттєву достовірність розрахунку параметрів буропідривних робіт.
Наукова новизна. Представлена робота є першим кроком до розробки єдиної перехідної класифікації від російських шкал за вибуховістю до аналогічних закордонних методичним практикам в частині вибуховості гірського масиву.
Практична значимість полягає в можливості швидкого переведення однієї класифікації за вибуховістю в іншу. Результати роботи рекомендується використовувати при проектуванні буропідривних робіт на всіх типах родовищ корисних копалин, а також у навчальному процесі.Цель. Совершенствование классификации горных пород по взрываемости на основе детального анализа особенностей существующих российских и зарубежных рейтинговых классификаций.
Методика. Применен комплексный методический подход, включающий сопоставление размеров гранулометрических фракций, определяемых по отечественным и зарубежным стандартам; сбор и обработка информации о существующих классификациях определения трудности взрываемости горных пород; составление сопоставительной классификации рассматриваемых классификаций или методик.
Результаты. Рассмотрены отечественные и зарубежные классификации горных пород по взрываемости. При сравнении отечественных классификаций в части трудности разрушения горного массива (взрываемости) была построена сопоставительная таблица, в которой между собой сопоставляются наиболее популярные классификации горных пород. При анализе зарубежного опыта составления классификаций горных пород по взрываемости было выявлено, что их методы несколько отличаются от российских, и представляют собой эмпирические зависимости, и рассчитываются для каждого типа массива в каждом отдельном случае индивидуально. Установлено, что наиболее популярной и рейтинговой системой для оценки взрываемости горных пород за рубежом является геомеханическая классификация Д.Х. Лабшира (MRMR). Показано, что зарубежные авторы, при составлении классификаций, делают акцент не только на физико-механические показатели горных пород (плотность, трещиноватость, пределы прочности на сжатие и растяжение и т.д.), но и на горнотехнические (линия наименьшего сопротивления, диаметр и глубина скважины, высота забоя и т.д.), что определяет существенную достоверность расчёта параметров буровзрывных работ.
Научная новизна. Представленная работа является первым шагом к разработке единой переходной классификации от российских шкал по взрываемости к аналогичным зарубежным методическим практикам в части взрываемости горного массива.
Практическая значимость. Заключается в возможности быстрого перевода одной классификации по взрываемости в другую. Результаты работы рекомендуется использовать при проектировании буровзрывных работ на всех типах месторождений полезных ископаемых, а также в учебном процессе.The research is carried out by a team of authors of Mine and Underground Construction Department at Siberian Federal University as part of a grant of the Russian Federation President for governmental support of young Russian scientists-Candidates of Sciences (МК-1178.2018.8)
Probing lepton flavour violation in scattering and conversion on nucleons
We study lepton flavour-violating interactions which could result in the
-lepton production in the scattering or in
conversion on nucleons at high energies. Phenomenological bounds on the
strength of interactions are extracted from
the combined result of the NOMAD and CHORUS experiments on searching for
oscillations. Some of these bounds supersede limits
from rare decays. We also propose a ``missing energy'' type experiment
searching for conversion on nucleons. The experiment can be
performed at a present accelerator or at a future neutrino factory.Comment: 13 pages, 4 figure
Investigation of the interaction of ion beams and X-ray quanta with deuterated crystal structures at the HELIS facility
The results of studies of the interaction of ion beams and X-ray quanta with deuterated crystal structures at the HELIS facility (LPI) are presente
Modernization of the pulse shape discrimination method for neutron and gamma quanta in scintillation detector
In this paper, we investigated the efficiency of several known and new methods of digital pulse shape discrimination for neutrons and gamma quanta. Experimental data were obtained on a setup consists of a Pu-Be neutron source, organic p-terphenyl scintillation detector and 14 bits, 500 MHz sampling rate flash-ADC with capability to store and upload to the host computer long waveforms for further analysi
Evaluation of individual-typological features of students of is professional-pedagogical institute
The article deals with the diagnostics results in the sphere of students’ predisposition to the certain sphere of professional activity; the results of distribution between the students’ population into six types of the personalityАнализируются результаты диагностики предрасположенности студентов к определенной сфере профессиональной деятельности; приводятся результаты распределения популяции обследуемых студентов на шесть типов личност
Applicability of QKD: TerraQuantum view on the NSA's scepticism
Quantum communication offers unique features that have no classical analog,
in particular, it enables provably secure quantum key distribution (QKD).
Despite the benefits of quantum communication are well understood within the
scientific community, the practical implementations sometimes meet with
scepticism or even resistance. In a recent publication [1], NSA claims that QKD
is inferior to "quantum-resistant" cryptography and does not recommend it for
use. Here we show that such a sceptical approach to evaluation of quantum
security is not well justified. We hope that our arguments will be helpful to
clarify the issue
Compact neutron generator with nanotube ion source
In this letter, we report the observation of fast neutrons generated when a positive acceleration potential is applied to an array of orientated carbon nanotubes, which are used as an ion source. The neutrons with energy of 2.45 MeV are generated as a result of D-D fusion reaction. The dependencies of the neutron yield on the value of the applied potential and residual pressure of deuterium are measured. The proposed approach is planned to be used for the development of compact neutron generator
Real-Time Water Quality Monitoring with Chemical Sensors
Water quality is one of the most critical indicators of environmental pollution and it affects all of us. Water contamination can be accidental or intentional and the consequences are drastic unless the appropriate measures are adopted on the spot. This review provides a critical assessment of the applicability of various technologies for real-time water quality monitoring, focusing on those that have been reportedly tested in real-life scenarios. Specifically, the performance of sensors based on molecularly imprinted polymers is evaluated in detail, also giving insights into their principle of operation, stability in real on-site applications and mass production options. Such characteristics as sensing range and limit of detection are given for the most promising systems, that were verified outside of laboratory conditions. Then, novel trends of using microwave spectroscopy and chemical materials integration for achieving a higher sensitivity to and selectivity of pollutants in water are described
Simulation of the solidification of the melt in the Vanyukov furnace in the case of emergency stoppage
A mathematical model of the Vanyukov furnace, which makes it possible to predict the behavior of an object in the emergency operational mode (upon the disconnection of the oxygen supply) and develop an effective system of additional heating which damps the consequences of the emergency mode and lowers the costs for the renovation of the furnace operation, is created. It is shown how solidification upon cooling the furnace with time is simulated using the enthalpy and porosity method. The mathematical model is adopted for existing production conditions, which are weakly defined. The energy characteristics of the mode for the solidifying furnace bath, which ensures its holding for a long time in the ready state to rapid firing, are found. Thus, the problem of excessively expensive furnace firing after prolonged production stoppage is solved in the conjugated statement with a calculation of the heating system of the overbath space. © 2013 Allerton Press, Inc
- …