1,039 research outputs found
Prediction of the curing time to achieve maturity of the nano-cement based concrete using the Weibull distribution model : a complementary data set
This data article provides a comparison data for nano-cement based concrete (NCC) and ordinary Portland cement based concrete (OPCC). Concrete samples (OPCC) were fabricated using ten different mix design and their characterization data is provided here. Optimization of curing time using the Weibull distribution model was done by analyzing the rate of change of compressive strength of the OPCC. Initially, the compressive strength of the OPCC samples was measured after completion of four desired curing times. Thereafter, the required curing time to achieve a particular rate of change of the compressive strength has been predicted utilizing the equation derived from the variation of the rate of change of compressive strength with the curing time, prior to the optimization of the curing time (at the 99.99% confidence level) using the Weibull distribution model. This data article complements the research article entitled "Prediction of the curing time to achieve maturity of the nano-cement based concrete using the Weibull distribution model" [1]
Rescue Mechanisms for Loss of Function Mutations Highlight Essential Residues at the Kir6.2 Channel Domain Interface
Some Findings Concerning Requirements in Agile Methodologies
gile methods have appeared as an attractive alternative to conventional methodologies. These methods try to reduce the time to market and, indirectly, the cost of the product through flexible development and deep customer involvement. The processes related to requirements have been extensively studied in literature, in most cases in the frame of conventional methods. However, conclusions of conventional methodologies could not be necessarily valid for Agile; in some issues, conventional and Agile processes are radically different. As recent surveys report, inadequate project requirements is one of the most conflictive issues in agile approaches and better understanding about this is needed. This paper describes some findings concerning requirements activities in a project developed under an agile methodology. The project intended to evolve an existing product and, therefore, some background information was available. The major difficulties encountered were related to non-functional needs and management of requirements dependencies
The influence of nonlinearities on the symmetric hydrodynamic response of a 10,000 TEU Container ship
The prediction of wave-induced motions and loads is of great importance for the design of marine structures. Linear potential flow hydrodynamic models are already used in different parts of the ship design development and appraisal process. However, the industry demands for design innovation and the possibilities offered by modern technology imply the need to also understand the modelling assumptions and associated influences of nonlinear hydrodynamic actions on ship response. At first instance, this paper presents the taxonomy of different Fluid Structure Interaction (FSI) methods that may be used for the assessment of ship motions and loads. Consequently, it documents in a practical way the effects of weakly nonlinear hydrodynamics on the symmetric wave-induced responses for a 10,000TEU Container ship. It is shown that the weakly nonlinear FSI models may be useful for the prediction of symmetric wave-induced loads and responses of such ship not only in way of amidships but also at the extremities of the hull. It is concluded that validation of hydrodynamic radiation and diffraction forces and their respective influence on ship response should be especially considered for those cases where the variations of the hull wetted surface in time may be noticeable
International energy agency ocean energy systems task 10 wave energy converter modeling verification and validation
This is the first joint reference paper for the Ocean
Energy Systems (OES) Task 10 Wave Energy Converter modeling
verification and validation group. The group is established
under the OES Energy Technology Network program under the
International Energy Agency. OES was founded in 2001 and
Task 10 was proposed by Bob Thresher (National Renewable
Energy Laboratory) in 2015 and approved by the OES Executive
Committee EXCO in 2016. The kickoff workshop took place in
September 2016, wherein the initial baseline task was defined.
Experience from similar offshore wind validation/verification
projects (OC3-OC5 conducted within the International Energy
Agency Wind Task 30) [1], [2] showed that a simple test
case would help the initial cooperation to present results in
a comparable way. A heaving sphere was chosen as the first
test case. The team of project participants simulated different
numerical experiments, such as heave decay tests and regular
and irregular wave cases. The simulation results are presented
and discussed in this paper.IEA-OES Task 1
Repeated measures regression mixture models
Regression mixture models are one increasingly utilized approach for developing theories about and exploring the heterogeneity of effects. In this study we aimed to extend the current use of regression mixtures to a repeated regression mixture method when repeated measures, such as diary-type and experience-sampling method, data are available. We hypothesized that additional information borrowed from the repeated measures would improve the model performance, in terms of class enumeration and accuracy of the parameter estimates. We specifically compared three types of model specifications in regression mixtures: (a) traditional single-outcome model; (b) repeated measures models with three, five, and seven measures; and (c) a single-outcome model with the average of seven repeated measures. The results showed that the repeated measures regression mixture models substantially outperformed the traditional and average single-outcome models in class enumeration, with less bias in the parameter estimates. For sample size, whereas prior recommendations have suggested that regression mixtures require samples of well over 1,000 participants, even for classes at a large distance from each other (classes with regression weights of.20 vs.70), the present repeated measures regression mixture models allow for samples as low as 200 participants with an increased number (i.e., seven) of repeated measures. We also demonstrate an application of the proposed repeated measures approach using data from the Sleep Research Project. Implications and limitations of the study are discussed
Geometrical barriers and lower critical field in MgB2 single crystals
International audienceThe first penetration field sHpd has been deduced from local magnetization and specific heat measurements in magnesium diboride single crystals. For Ha ic, the geometrical barriers (GB) play a dominant role in the irreversibility mechanism. In thin samples, neglecting the GB in this direction would then lead to a large overestimation of Hc1 deduced from Hp through the standard elliptical formula. The lower critical field is found to be isotropic at low temperature (0.11±0.01 T)
Relaxation Effects in the Transition Temperature of Superconducting HgBa2CuO4+delta
In previous studies on a number of under- and overdoped high temperature
superconductors, including YBa_{2}Cu_{3}O_{7-y} and Tl_{2}Ba_{2}CuO_{6+\delta},
the transition temperature T_c has been found to change with time in a manner
which depends on the sample's detailed temperature and pressure history. This
relaxation behavior in T_c is believed to originate from rearrangements within
the oxygen sublattice. In the present high-pressure studies on
HgBa_{2}CuO_{4+\delta} to 0.8 GPa we find clear evidence for weak relaxation
effects in strongly under- and overdoped samples () with
an activation energy . For overdoped
HgBa_{2}CuO_{4+\delta} E_{A} increases under pressure more rapidly than
previously observed for YBa_{2}Cu_{3}O_{6.41}, yielding an activation volume of
+11 \pm 5 cm^{3}; the dependence of T_c on pressure is markedly nonlinear, an
anomalous result for high-T_c superconductors in the present pressure range,
giving evidence for a change in the electronic and/or structural properties
near 0.4 GPa
Discrete symmetries, invisible axion and lepton number symmetry in an economic 3-3-1 model
We show that Peccei-Quinn and lepton number symmetries can be a natural
outcome in a 3-3-1 model with right-handed neutrinos after imposing a Z_11 x
Z_2 symmetry. This symmetry is suitably accommodated in this model when we
augmented its spectrum by including merely one singlet scalar field. We work
out the breaking of the Peccei-Quinn symmetry, yielding the axion, and study
the phenomenological consequences. The main result of this work is that the
solution to the strong CP problem can be implemented in a natural way, implying
an invisible axion phenomenologically unconstrained, free of domain wall
formation and constituting a good candidate for the cold dark matter.Comment: 17 pages, Revtex
Chemical Synthesis of PEDOT–Au Nanocomposite
In this work, gold-incorporated polyethylenedioxythiophene nanocomposite material has been synthesized chemically, employing reverse emulsion polymerization method. Infrared and Raman spectroscopic studies revealed that the polymerization of ethylenedioxythiophene leads to the formation of polymer polyethylenedioxythiophene incorporating gold nanoparticles. Scanning electron microscope studies showed the formation of polymer nanorods of 50–100 nm diameter and the X-ray diffraction analysis clearly indicates the presence of gold nanoparticles of 50 nm in size
- …