762 research outputs found
Physicochemical characterization of natural hydroxyapatite/ cellulose composite
The natural hydroxyapatite (HAp, activated at different temperatures)/ cellulose composites have been prepared by usingsonication method to improve the physical properties of the cellulose fibre. The molecular level interaction and the physicalproperties of the hydroxyapatite/cellulose composite are examined using FTIR, X-ray diffraction, SEM, and thermalanalysis. The absorption bands at around 660 cm1 confirm the O–P–O bending vibration in the HAp/cellulose composites.There is a difference in the d-spacing of the HAp /cellulose composite, indicating that the HAp is reactive towards cellulose.SEM indicates that HAp could penetrate the cellulose network structure to form particles that is helpful to improve themechanical properties of the cellulose. The porosities of HAp/cellulose composites decrease, and their compressive strengthincrease as compared to those of cellulose. Thermogravimetric analysis confirms the highest thermal stability of theprepared composites
Observation of in
Using a sample of events recorded with
the BESIII detector at the symmetric electron positron collider BEPCII, we
report the observation of the decay of the charmonium state
into a pair of mesons in the process
. The branching fraction is measured for the first
time to be , where the first uncertainty is
statistical, the second systematic and the third is from the uncertainty of
. The mass and width of the are
determined as MeV/ and
MeV.Comment: 13 pages, 6 figure
Observation and study of the decay
We report the observation and study of the decay
using events
collected with the BESIII detector. Its branching fraction, including all
possible intermediate states, is measured to be
. We also report evidence for a structure,
denoted as , in the mass spectrum in the GeV/
region. Using two decay modes of the meson ( and
), a simultaneous fit to the mass spectra is
performed. Assuming the quantum numbers of the to be , its
significance is found to be 4.4, with a mass and width of MeV/ and MeV, respectively, and a
product branching fraction
. Alternatively, assuming , the
significance is 3.8, with a mass and width of MeV/ and MeV, respectively, and a product
branching fraction
. The angular distribution of
is studied and the two assumptions of the
cannot be clearly distinguished due to the limited statistics. In all
measurements the first uncertainties are statistical and the second systematic.Comment: 10 pages, 6 figures and 4 table
Feasibility studies of time-like proton electromagnetic form factors at PANDA at FAIR
Simulation results for future measurements of electromagnetic proton form
factors at \PANDA (FAIR) within the PandaRoot software framework are reported.
The statistical precision with which the proton form factors can be determined
is estimated. The signal channel is studied on the basis
of two different but consistent procedures. The suppression of the main
background channel, , is studied.
Furthermore, the background versus signal efficiency, statistical and
systematical uncertainties on the extracted proton form factors are evaluated
using two different procedures. The results are consistent with those of a
previous simulation study using an older, simplified framework. However, a
slightly better precision is achieved in the PandaRoot study in a large range
of momentum transfer, assuming the nominal beam conditions and detector
performance
Search for the decay
We search for radiative decays into a weakly interacting neutral
particle, namely an invisible particle, using the produced through the
process in a data sample of
decays collected by the BESIII detector
at BEPCII. No significant signal is observed. Using a modified frequentist
method, upper limits on the branching fractions are set under different
assumptions of invisible particle masses up to 1.2 . The upper limit corresponding to an invisible particle with zero mass
is 7.0 at the 90\% confidence level
Dry Bacterial Cellulose and Carboxymethyl Cellulose formulations with interfacial-active performance: processing conditions and redispersion
Dry or powdered formulations of food additives facilitate transportation, storage, preservation and handling. In this work, dry formulations of bacterial cellulose and carboxymethyl cellulose (BC:CMC), easily redispersible and preserving the functionality of the never-dried dispersions are reported. Different processing parameters and their effect on the materials properties were evaluated, namely: (i) wet-grinding of BC (Hand-blender, Microcut Head Impeller, High-pressure Homogenizer), (ii) drying of BC:CMC mixtures (fast drying at130 °C and slow drying at 80 °C) and subsequent (iii) comminution to different particle sizes. The dispersibility of the obtained BC:CMC powders was evaluated, and their functionality after redispersion was assessed by measuring the dynamic viscosity, the effect in oil/water interfacial tension (liquidliquid system) and the stabilization of cocoa in milk (solidliquid system). The size of BC fibre bundles was of paramount relevance to its stabilizing ability in multiphasic systems. A more extensive wet-grinding of the BC fibres was accompanied by a loss in the BC:CMC functionality, related to the increasingly smaller size of the BC bundles. Indeed, as the Dv (50) of the wet BC bundles was reduced from 1228 to 55 µm, the BC:CMC viscosity profile dropped and the effect on interfacial tension decreased. This effect was observed both on the never-dried and dry BC:CMC formulations. On the other hand, the drying method did not play a major effect in the materials properties. In a benchmarking study, the BC:CMC formulations, at a low concentration (0.15%), had better stabilizing ability of the cocoa particles than several commercial cellulose products.Electronic supplementary material The online version of this article (https://doi.org/10.1007/s10570-020-03211-9) contains supplementary material, which is available to authorized users.This study was supported by FCT under
the scope of the strategic funding of UID/BIO/04469/2019 unit
and BioTecNorte operation (NORTE-01-0145-FEDER000004) funded by the European Regional Development Fund
under the scope of Norte2020-Programa Operacional Regional
do Norte. Daniela Martins also gratefully acknowledges FCT for
the PhD scholarship, reference SFRH/BD/115917/2016.info:eu-repo/semantics/publishedVersio
Measurement of proton electromagnetic form factors in in the energy region 2.00-3.08 GeV
The process of is studied at 22 center-of-mass
energy points () from 2.00 to 3.08 GeV, exploiting 688.5~pb of
data collected with the BESIII detector operating at the BEPCII collider. The
Born cross section~() of is
measured with the energy-scan technique and it is found to be consistent with
previously published data, but with much improved accuracy. In addition, the
electromagnetic form-factor ratio () and the value of the
effective (), electric () and magnetic () form
factors are measured by studying the helicity angle of the proton at 16
center-of-mass energy points. and are determined with
high accuracy, providing uncertainties comparable to data in the space-like
region, and is measured for the first time. We reach unprecedented
accuracy, and precision results in the time-like region provide information to
improve our understanding of the proton inner structure and to test theoretical
models which depend on non-perturbative Quantum Chromodynamics
First observations of hadrons
Based on events collected with
the BESIII detector, five hadronic decays are searched for via process
. Three of them, ,
, and are observed for the first
time, with statistical significances of 7.4, , and
9.1, and branching fractions of ,
, and ,
respectively, where the first uncertainties are statistical and the second
systematic. No significant signal is observed for the other two decay modes,
and the corresponding upper limits of the branching fractions are determined to
be and at 90% confidence level.Comment: 17 pages, 16 figure
- …