2,954 research outputs found
An Approach of Business Decision Making based on E-Learning and Knowledge Management
Today's, companies have increasingly been faced with many pressures related to competition and competitiveness. Understanding and influencing these changes requires effective management of human knowledge, including decision-making. This paper examines an experience of implementing knowledge management within organizations. We propose an approach based on E-Learning and its components to establish an organizational memory of documents, processes and Decision-making knowledge. We have been particularly interested in training in decision-making and we have accompanied the entity studied in a process of explicitation of knowledge and conduct of the change
Electrical characterization of the soft breakdown failure mode in MgO layers
The soft breakdown (SBD) failure mode in 20 nm thick MgO dielectric layers grown on Si substrates was investigated. We show that during a constant voltage stress, charge trapping and progressive breakdown coexist, and that the degradation dynamics is captured by a power-law time dependence. We also show that the SBD current-voltage (I-V) characteristics follow the power-law model I = aVb typical of this conduction mechanism but in a wider voltage window than the one reported in the past for SiO2. The relationship between the magnitude of the current and the normalized differential conductance was analyzed
Electron energy band alignment at the (100)Si/MgO interface
The electron energy band diagram at the (100)Si/MgO interface is characterized using internal photoemission of electrons and holes from Si into the oxide. For the as-deposited amorphous MgO the interface barriers correspond to a band gap width of 6.1 eV, i.e., much lower than the conventionally assumed bulk crystal value (7.83 eV). The annealing-induced crystallization of MgO mostly affects the energy of the valence band while the conduction band bottom retains its energy position at 3.37 +/- 0.05 eV above the top of the silicon valence band.(C) 2010 American Institute of Physics. (doi:10.1063/1.3294328
Multi-frequency inversion-charge pumping for charge separation and mobility analysis in high-k/InGaAs metal-oxide-semiconductor field-effect transistors
An alternative multi-frequency inversion-charge pumping (MFICP) technique was developed to directly separate the inversion charge density (N-inv) from the trapped charge density in high-k/InGaAs metal-oxide-semiconductor field-effect transistors (MOSFETs). This approach relies on the fitting of the frequency response of border traps, obtained from inversion-charge pumping measurements performed over a wide range of frequencies at room temperature on a single MOSFET, using a modified charge trapping model. The obtained model yielded the capture time constant and density of border traps located at energy levels aligned with the InGaAs conduction band. Moreover, the combination of MFICP and pulsed I-d-V-g measurements enabled an accurate effective mobility vs N-inv extraction and analysis. The data obtained using the MFICP approach are consistent with the most recent reports on high-k/InGaAs. (C) 2015 AIP Publishing LLC
Multi-technique characterisation of MOVPE-grown GaAs on Si
The heterogeneous integration of III-V materials on a Si CMOS platform offers tremendous prospects for future high speed and low power logic applications. That said this integration generates immense scientific and technological challenges. In this work multi-technique characterisation is used to investigate properties of GaAs layers grown by Metal-Organic Vapour Phase Epitaxy (MOVPE) on Si substrates - (100) with 4⁰ offset towards - under various growth conditions. This being a crucial first step towards the production of III-V template layers with a relatively lower density of defects for selective epitaxial overgrowth of device quality material. The optical and structural properties of heteroepitaxial GaAs are first investigated by micro-Raman spectroscopy and photoluminescence and reflectance measurements. High-resolution X-ray diffraction (HR-XRD) is used to investigate structural properties. Advanced XRD techniques, including double-axis diffraction and X-ray crystallographic mapping are used to evaluate degrees of relaxation and distribution of the grain orientations in the epilayers, respectively. Results obtained from the different methodologies are compared in an attempt to understand growth kinetics of the materials system. The GaAs overlayer grown with annealing at 735⁰C following As predeposition at 500⁰C shows the best crystallinity. Close inspection confirms the growth of epitaxial GaAs preferentially oriented along (100) embedded in a highly-textured polycrystalline structure
Seismic risk in the city of Al Hoceima (north of Morocco) using the vulnerability index method, applied in Risk-UE project
The final publication is available at Springer via http://dx.doi.org/10.1007/s11069-016-2566-8Al Hoceima is one of the most seismic active regions in north of Morocco. It is demonstrated by the large seismic episodes reported in seismic catalogs and research studies. However, seismic risk is relatively high due to vulnerable buildings that are either old or don’t respect seismic standards. Our aim is to present a study about seismic risk and seismic scenarios for the city of Al Hoceima. The seismic vulnerability of the existing residential buildings was evaluated using the vulnerability index method (Risk-UE). It was chosen to be adapted and applied to the Moroccan constructions for its practicality and simple methodology. A visual inspection of 1102 buildings was carried out to assess the vulnerability factors. As for seismic hazard, it was evaluated in terms of macroseismic intensity for two scenarios (a deterministic and probabilistic scenario). The maps of seismic risk are represented by direct damage on buildings, damage to population and economic cost. According to the results, the main vulnerability index of the city is equal to 0.49 and the seismic risk is estimated as Slight (main damage grade equal to 0.9 for the deterministic scenario and 0.7 for the probabilistic scenario). However, Moderate to heavy damage is expected in areas located in the newer extensions, in both the east and west of the city. Important economic losses and damage to the population are expected in these areas as well. The maps elaborated can be a potential guide to the decision making in the field of seismic risk prevention and mitigation strategies in Al Hoceima.Peer ReviewedPostprint (author's final draft
Inversion in the In0.53Ga0.47As metal-oxide-semiconductor system: Impact of the In0.53Ga0.47As doping concentration
In0.53Ga0.47As metal-oxide-semiconductor (MOS) capacitors with an Al2O3 gate oxide and a range of n and p-type In0.53Ga0.47As epitaxial concentrations were examined. Multi-frequency capacitance-voltage and conductance-voltage characterization exhibited minority carrier responses consistent with surface inversion. The measured minimum capacitance at high frequency (1 MHz) was in excellent agreement with the theoretical minimum capacitance calculated assuming an inverted surface. Minority carrier generation lifetimes, sg, extracted from experimentally measured transition frequencies, xm, using physics based a.c. simulations, demonstrated a reduction in sg with increasing epitaxial doping concentration. The frequency scaled conductance, G/x, in strong inversion allowed the estimation of accurate Cox values for these MOS devices
Electrical Properties of High-k Oxide in Pd/Al2O3/InGaAs Stack
The paper presents the results of capacitance-voltage (C-V) characterization of metal-oxidesemiconductor
(MOS) structure, namely Pd/Al2O3/ In0.53Ga0.47As/InP. It is shown that MOS structure under
study exhibit both electron and hole trapping with permanent and temporary charge trapping contributions.
The interfacial transition layer between the high-k oxide and InGaAs has the greatest influence on
this charge trapping phenomenon.
When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/3504
Enhanced piezoelectric properties of PVdF-HFP/PZT nanocomposite for energy harvesting application
The use of piezoelectric nanocomposite in detection and actuation applications for the development of electromechanical microsystems (MEMS) has become quite common over the last decade. In this paper, we present a flexible piezoelectric nanocomposite films, composed of lead zirconate titanate (PZT) nanoparticles, embedded in poly(vinylidene-difluoride hexafluoro propylene) (PVdF-HFP) matrix. Piezoelectric and ferroelectric properties evolution is proportional to the evolution of the crystalline β-phase. The evaluation of the interactions between PZT and PVdF- HFP, performed by Fourier transform infrared spectroscopy (FTIR), revealed a dramatic improvement in these characteristics over pure PVdF-HFP, and attributed to a better crystallinity of the PVdF-HFP matrix and uniform distribution of nanoparticles. These films nanocomposites were done by solvent casting method, with various concentrations of PZT. Results of these experiments indicate that the investigated thin films nanocomposites are appropriate for various applications in energy storage and energy harvesting application
- …