Element composition and mineralogical characterisation of air pollution control residue from UK energy-from-waste facilities

Air pollution control (APC) residues from energy-from-waste (EfW) are alkaline (corrosive) and contain high concentrations of metals, such as zinc and lead, and soluble salts, such as chlorides and sulphates. The EPA 3050B-extractable concentrations of 66 elements, including critical elements of strategic importance for advanced electronics and energy technologies, were determined in eight APC residues from six UK EfW facilities. The concentrations of Ag (6-15mg/kg) and In (1-13mg/kg), as well as potential pollutants, especially Zn (0.26-0.73wt.%), Pb (0.05-0.2wt.%), As, Cd, Cu, Mo, Sb, Sn and Se were found to be enriched in all APC residues compared to average crustal abundances. Results from a combination of scanning electron microscopy with energy dispersive X-ray spectroscopy and also powder X-ray diffraction, thermal analysis and Fourier transform infrared spectroscopy give an exceptionally full understanding of the mineralogy of these residues, which is discussed in the context of other results in the literature. The present work has shown that the bulk of the crystalline phases present in the investigated APC residues include Ca-based phases, such as CaCl OH , CaCO , Ca(OH) , CaSO , and CaO, as well as soluble salts, such as NaCl and KCl. Poorly-crystalline aragonite was identified by FTIR. Sulphur appears to have complex redox speciation, presenting as both anhydrite and hannebachite in some UK EfW APC residues. Hazardous elements (Zn and Pb) were widely associated with soluble Ca- and Cl-bearing phases (e.g. CaCl OH and sylvite), as well as unburnt organic matter and aluminosilicates. Specific metal-bearing minerals were also detected in some samples: e.g., Pb present as cerussite; Zn in gahnite, zincowoodwardite and copper nickel zinc oxide; Cu in tenorite, copper nickel zinc oxide and fedotovite. Aluminium foil pieces were present and abundantly covered by fine phases, particularly in any cracks, probably in the form of Friedel\u27s salt. x 2 - x 3 2 4 x 2 -

Characterisation of ashes from waste biomass power plants and phosphorus recovery

Biowastes, such as meat and bone meal (MBM), and poultry litter (PL), are used as energy sources for industrial combustion in the UK. However, the biomass ashes remaining after combustion, which contain nutrients such as phosphorus, are landfilled rather than utilised. To promote their utilisation, biomass ashes from industries were characterised in terms of their elemental and mineral compositions, phosphorus extractability, and pH-dependent leachability. These ashes were highly alkaline (pH as high as 13), and rich in calcium and phosphorus. The P bio-availabilities in the ash evaluated by Olsen\u27s extraction were low. Hydroxyapatite and potassium sodium calcium phosphate were identified by X-ray powder diffraction (XRD) as the major phases in the MBM and PL ashes, respectively. The leaching of P, Ca, and many other elements was pH dependent, with considerable increase in leaching below about pH 6. P recovery by acid dissolution (e.g., with H SO ) seems feasible and promising; the optimized acid consumption for ~90% P recovery could be as low as 3.2–5.3 mol H /mol P. 2 4

In vivo Neutralization of Pro-inflammatory Cytokines During Secondary Streptococcus pneumoniae Infection Post Influenza A Virus Infection

An overt pro-inflammatory immune response is a key factor contributing to lethal pneumococcal infection in an influenza pre-infected host and represents a potential target for therapeutic intervention. However, there is a paucity of knowledge about the level of contribution of individual cytokines. Based on the predictions of our previous mathematical modeling approach, the potential benefit of IFN-γ- and/or IL-6-specific antibody-mediated cytokine neutralization was explored in C57BL/6 mice infected with the influenza A/PR/8/34 strain, which were subsequently infected with the Streptococcus pneumoniae strain TIGR4 on day 7 post influenza. While single IL-6 neutralization had no effect on respiratory bacterial clearance, single IFN-γ neutralization enhanced local bacterial clearance in the lungs. Concomitant neutralization of IFN-γ and IL-6 significantly reduced the degree of pneumonia as well as bacteremia compared to the control group, indicating a positive effect for the host during secondary bacterial infection. The results of our model-driven experimental study reveal that the predicted therapeutic value of IFN-γ and IL-6 neutralization in secondary pneumococcal infection following influenza infection is tightly dependent on the experimental protocol while at the same time paving the way toward the development of effective immune therapies

Co-processing of raw and washed air pollution control residues from energy-from-waste facilities in the cement kiln

Co-processing of industrial wastes as alternative raw materials in cement manufacture is an example of industrial symbiosis for improved material resource efficiency. Since co-processing introduces impurities from wastes, such as air pollution control residue (APCR) from municipal solid waste combustion, into the cement kiln, a better understanding of their environmental impacts and effects on cement manufacturing and quality is needed. Portland cement clinkers containing 5–35% raw or 5–34% washed APCR were prepared, with formation of all typical minerals, but with effects on clinkering reactions, and increased 2CaO·SiO2 and decreased 3CaO·SiO2 and 3CaO·Al2O3. Raw APCR affected the shape of the 2CaO·SiO2 and 3CaO·SiO2 grains, and cement paste from clinker made with 35% APCR exhibited negligible 28d strength. Pastes from the clinkers with lower contents of APCR or washed APCR had strengths that were lower than that of the control at 7d, similar at 28d (∼90 MPa) and higher at 6 m (up to 120 MPa), consistent with their 2CaO·SiO2 and 3CaO·SiO2 contents. Utilization of minerals in APCR thus comes with a trade-off against cement quality. Volatilisation of S, Cl, Pb was reduced by washing, which fully eliminated volatilisation of Zn. Zn was found mainly in the interstitial phases of the clinker, in solid solution in 4CaO·Al2O3·Fe2O3 or 3CaO·Al2O3. Further investigation is required to determine whether Zn and other incorporated elements may be released from the cement paste when these phases react with water. APCR co-processing may reduce CO2 emissions by avoiding CaCO3 decomposition, but this is an uncertain benefit, which may be outweighed by the detrimental effects of APCR alkalis, Cl, S and metals on cement production and quality. Life cycle environmental impacts associated with washing, and dispersal of contaminants in the built environment through construction materials, are additional concerns

Speciation of toxic pollutants in Pb/Zn smelter slags by X-ray Absorption Spectroscopy in the context of the literature

Pb/Zn smelter slag is a hazardous industrial waste from the Imperial Smelting Process (ISP). The speciation of zinc, lead, copper and arsenic in the slag controls their recovery or fate in the environment but has been little investigated. X-ray Absorption Spectroscopy (XAS) was applied to this complex poorly crystalline material for the first time to gain new insights about speciation of elements at low concentration. Zn, Cu, As K-edge and Pb L3-edge XAS was carried out for a Pb/Zn slag from a closed ISP facility in England, supported by Fe, S and P K-edge XAS. Results are presented in the context of a full review of the literature. X-ray fluorescence showed that concentrations of Zn, Pb, Cu and As were 8.4, 1.6, 0.48 and 0.45 wt.%, respectively. Wüstite (FeO) was the only crystalline phase identified by X-ray diffraction, but XAS provided a more complete understanding of the matrix. Zn was found to be mainly present in glass, ZnS, and possibly solid solutions with Fe oxides; Pb was mainly present in glass and apatite minerals (e.g., Pb5(PO4)3OH); Cu was mainly speciated as Cu2S, with some metallic Cu and a weathering product, Cu(OH)2; As speciation was likely dominated by arsenic (III) and (V) oxides and sulfides

Rapid Immunomagnetic Negative Enrichment of Neutrophil Granulocytes from Murine Bone Marrow for Functional Studies In Vitro and In Vivo

Polymorphonuclear neutrophils (PMN) mediate early immunity to infection but can also cause host damage if their effector functions are not controlled. Their lack or dysfunction is associated with severe health problems and thus the analysis of PMN physiology is a central issue. One prerequisite for PMN analysis is the availability of purified cells from primary organs. While human PMN are easily isolated from peripheral blood, this approach is less suitable for mice due to limited availability of blood. Instead, bone marrow (BM) is an easily available reservoir of murine PMN, but methods to obtain pure cells from BM are limited. We have developed a novel protocol allowing the isolation of highly pure untouched PMN from murine BM by negative immunomagnetic isolation using a complex antibody cocktail. The protocol is simple and fast (∼1 h), has a high yield (5–10*106 PMN per animal) and provides a purity of cells equivalent to positive selection (>80%). Most importantly, cells obtained by this method are non-activated and remain fully functional in vitro or after adoptive transfer into recipient animals. This method should thus greatly facilitate the study of primary murine PMN in vitro and in vivo

Knowledge base to facilitate anthropogenic resource assessment

The traditional mining sector uses resource assessments to estimate the mineability of natural resources. The results are communicated to investors, authorities and corporate management boards in a standardized manner, at least on a country level. The recycling sector also requires estimates of recoverable anthropogenic resources. Evidence-based resource assessment, including the selection of parameters for characterising resources and methods for assessing their recoverability, is essential to obtain comparable estimates over time and across scales. Within this report, the COST Action MINEA presents a practical and user-friendly knowledge base for facilitating anthropogenic resource assessments. The fouces is on extractives industry residues, residues in landfills, residues from municipal solid waste incineration as well as construction & demolition waste flows. The key objectives are: To relate current knowledge levels, gaps and future needs to assessments of viability of anthropogenic resource recovery. To review case studies that demonstrate anthropogenic resource assessment in combination with resource classification in order to communicate the viability of anthropogenic resource recovery. We encourage academics, businesses and government organisations to use this report for: designing and developing case studies, future planning, developing standards for characterizing resource quantities and evaluating their recoverability, and collecting and harmonizing resource statistics. ************* The “Mining the European Anthroposphere” (MINEA) is a pan-European expert network, which received funding from the COST Association between 2016 and 2020. The network pools knowledge for estimating the future recoverability of raw materials from anthropogenic resources

Clinical and virological characteristics of hospitalised COVID-19 patients in a German tertiary care centre during the first wave of the SARS-CoV-2 pandemic: a prospective observational study

Purpose: Adequate patient allocation is pivotal for optimal resource management in strained healthcare systems, and requires detailed knowledge of clinical and virological disease trajectories. The purpose of this work was to identify risk factors associated with need for invasive mechanical ventilation (IMV), to analyse viral kinetics in patients with and without IMV and to provide a comprehensive description of clinical course. Methods: A cohort of 168 hospitalised adult COVID-19 patients enrolled in a prospective observational study at a large European tertiary care centre was analysed. Results: Forty-four per cent (71/161) of patients required invasive mechanical ventilation (IMV). Shorter duration of symptoms before admission (aOR 1.22 per day less, 95% CI 1.10-1.37, p < 0.01) and history of hypertension (aOR 5.55, 95% CI 2.00-16.82, p < 0.01) were associated with need for IMV. Patients on IMV had higher maximal concentrations, slower decline rates, and longer shedding of SARS-CoV-2 than non-IMV patients (33 days, IQR 26-46.75, vs 18 days, IQR 16-46.75, respectively, p < 0.01). Median duration of hospitalisation was 9 days (IQR 6-15.5) for non-IMV and 49.5 days (IQR 36.8-82.5) for IMV patients. Conclusions: Our results indicate a short duration of symptoms before admission as a risk factor for severe disease that merits further investigation and different viral load kinetics in severely affected patients. Median duration of hospitalisation of IMV patients was longer than described for acute respiratory distress syndrome unrelated to COVID-19

Variation in Structure and Process of Care in Traumatic Brain Injury: Provider Profiles of European Neurotrauma Centers Participating in the CENTER-TBI Study.

INTRODUCTION: The strength of evidence underpinning care and treatment recommendations in traumatic brain injury (TBI) is low. Comparative effectiveness research (CER) has been proposed as a framework to provide evidence for optimal care for TBI patients. The first step in CER is to map the existing variation. The aim of current study is to quantify variation in general structural and process characteristics among centers participating in the Collaborative European NeuroTrauma Effectiveness Research in Traumatic Brain Injury (CENTER-TBI) study. METHODS: We designed a set of 11 provider profiling questionnaires with 321 questions about various aspects of TBI care, chosen based on literature and expert opinion. After pilot testing, questionnaires were disseminated to 71 centers from 20 countries participating in the CENTER-TBI study. Reliability of questionnaires was estimated by calculating a concordance rate among 5% duplicate questions. RESULTS: All 71 centers completed the questionnaires. Median concordance rate among duplicate questions was 0.85. The majority of centers were academic hospitals (n = 65, 92%), designated as a level I trauma center (n = 48, 68%) and situated in an urban location (n = 70, 99%). The availability of facilities for neuro-trauma care varied across centers; e.g. 40 (57%) had a dedicated neuro-intensive care unit (ICU), 36 (51%) had an in-hospital rehabilitation unit and the organization of the ICU was closed in 64% (n = 45) of the centers. In addition, we found wide variation in processes of care, such as the ICU admission policy and intracranial pressure monitoring policy among centers. CONCLUSION: Even among high-volume, specialized neurotrauma centers there is substantial variation in structures and processes of TBI care. This variation provides an opportunity to study effectiveness of specific aspects of TBI care and to identify best practices with CER approaches