Improved functionalization of oleic acid-coated iron oxide nanoparticles for biomedical applications

Superparamagnetic iron oxide nanoparticles can providemultiple benefits for biomedical applications in aqueous environments such asmagnetic separation or magnetic resonance imaging. To increase the colloidal stability and allow subsequent reactions, the introduction of hydrophilic functional groups onto the particles’ surface is essential. During this process, the original coating is exchanged by preferably covalently bonded ligands such as trialkoxysilanes. The duration of the silane exchange reaction, which commonly takes more than 24 h, is an important drawback for this approach. In this paper, we present a novel method, which introduces ultrasonication as an energy source to dramatically accelerate this process, resulting in high-quality waterdispersible nanoparticles around 10 nmin size. To prove the generic character, different functional groups were introduced on the surface including polyethylene glycol chains, carboxylic acid, amine, and thiol groups. Their colloidal stability in various aqueous buffer solutions as well as human plasma and serum was investigated to allow implementation in biomedical and sensing applications.status: publishe

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Industrial versus Laboratory Clinker Processing Using Grinding Aids (Scale Effect)

The evaluation of grinding aid (GA) effect on clinker processing in laboratory grinding mills is relatively simple. Yet, the results obtained cannot be directly transposed to industrial mills, given the fundamentally different operational modes and grinding parameters. This paper seeks to evaluate the scale effect by comparing the results obtained from a closed-circuit tube mill operating at 90 ton/hr to those determined using a 50-liter laboratory mill. Tests results have shown that the decrease in specific energy consumption (Ec) due to glycol or amine-based GA can be evaluated under laboratory conditions. However, such tests underestimate the actual performance that could be achieved in real-scale mills; the Ec reduction due to GA is around twofold higher when grinding is performed in real-scale mill. Compared to industrial tests, the cement particle size distribution curves widened and shifted towards higher diameters when grinding was performed under laboratory conditions, particularly with GA additions. This led to remarkable changes in water demand, setting time, and 1- and 28-day compressive strengths

Use of High- Range Water Reducer to Mitigate the Detrimental Effect of Recycled Acrylic- Based Polymers on Concrete Performance

The incorporation of recycled polymers from waste latex paints (WLPs) in concrete manufacturing is very limited. In fact, this practice cannot be formally implemented without thorough assessment of the various implications that could result from WLP additions on concrete properties. This paper seeks to provide better understanding on effect of WLP constituents and substitution rates on concrete fresh and mechanical properties. It also examines the effect of incorporating naphthalene-based high-range water reducer (HRWR) to mitigate the detrimental effects associated with such additions. Tested WLPs were not randomly collected from waste collection sites; rather produced to assure full traceability of composition and then stored for around 1-year to expire. Test results have shown that workability, setting time, and hardened properties of concrete are directly affected by the polymer latex type and content including the pigment/extender ratio. The use of HRWR is efficient to control work ability and its loss over time when WLPs are disposed in concrete at relatively high rate of 10% of mixing water. The incorporation of HRWR should be coupled with certain reduction in free water to control the drop in compressive strength and bond to embedded steel bars

Use of Seashell and Limestone Fillers in Metakaolin-Based Geopolymers for Masonry Mortars

Mortars intended for plastering and masonry works normally comply to EN 413-1 and/or ASTM C91 specifications. This paper seeks to assess the suitability of geopolymers (GPs) composed of metakaolin and seashell wastes for masonry applications. The sodium hydroxide and sodium silicate activators contained air-entraining molecules to secure about 10% ± 2% air content. Just like the cement-based mortars, test results showed that the mechanical properties of GPs including the compressive strength, flexural strength, pull-off adhesion, and water sorptivity decreased when the seashell concentration increased in the mixture. This was mainly related to a dilution effect that reduces the aluminosilicate precursor content and formation of rigid bonds. The replacement of limestone filler by seashell powder slightly increased the mechanical properties, which was attributed to higher seashell hardness that densifies the microstructure and provides additional resistance to support the external stresses. Yet, the grinding of seashells into fine powder required higher energy than what is needed for the comminution of clinker or limestone. The use of GPs is particularly advantageous for masonry applications, as it speeds up the construction operations while eliminating the hassle of moist curing normally required with cement-based plasters

Use of Seashell and Limestone Fillers in Metakaolin-Based Geopolymers for Masonry Mortars

Mortars intended for plastering and masonry works normally comply to EN 413-1 and/or ASTM C91 specifications. This paper seeks to assess the suitability of geopolymers (GPs) composed of metakaolin and seashell wastes for masonry applications. The sodium hydroxide and sodium silicate activators contained air-entraining molecules to secure about 10% ± 2% air content. Just like the cement-based mortars, test results showed that the mechanical properties of GPs including the compressive strength, flexural strength, pull-off adhesion, and water sorptivity decreased when the seashell concentration increased in the mixture. This was mainly related to a dilution effect that reduces the aluminosilicate precursor content and formation of rigid bonds. The replacement of limestone filler by seashell powder slightly increased the mechanical properties, which was attributed to higher seashell hardness that densifies the microstructure and provides additional resistance to support the external stresses. Yet, the grinding of seashells into fine powder required higher energy than what is needed for the comminution of clinker or limestone. The use of GPs is particularly advantageous for masonry applications, as it speeds up the construction operations while eliminating the hassle of moist curing normally required with cement-based plasters