Fundamentals and Applications of Surface-Enhanced Raman Spectroscopy (SERS)

When a molecule is adsorbed on some metallic nanostructured surfaces such as silver, copper or gold, it can undergo an enormous enhancement of the Raman signal giving rise to the so called Surface-Enhanced Raman Scattering (SERS). The high sensitivity of this effect allows an accurate structural study of adsorbates at very low concentrations. The SERS effect has historically been associated with the substrate roughness on two characteristic length scales. Surface roughness on the 10 to 100 nm length scale supports localized plasmon resonances which are considered as the dominant enhancement mechanism of SERS (Electromagnetic Enhancement Mechanism: SERS-EM). It is usually accepted that these electromagnetic resonances can increase the scattered intensity by an average factor of ca. 104 to 107. A secondary mechanism often thought to require atomic scale roughness is referred to as Charge Transfer (CT) Enhancement Mechanism (SERS-CT). This mechanism involves the photoinduced transfer of an electron from the metal to the adsorbate or vice versa and involves new electronic excited CT states which result from adsorbate–substrate chemical interactions. It is also estimated that such SERS-CT mechanism can enhance the scattering cross-section by a factor of ca. 10 to 102. These two mechanisms can operate simultaneously, depending on the particular systems and experimental conditions, making difficult to recognize each one and to estimate their relative magnitude in a particular spectrum.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

A to Z of the Muon anomalous magnetic moment in the MSSM with Pati-Salam at the GUT scale

We analyse the low energy predictions of the minimal supersymmetric standard model (MSSM) arising from a GUT scale Pati-Salam gauge group further constrained by an A4 × Z5 family symmetry, resulting in four soft scalar masses at the GUT scale: one left-handed soft mass m0 and three right-handed soft masses m1, m2, m3, one for each generation. We demonstrate that this model, which was initially developed to describe the neutrino sector, can explain collider and non-collider measurements such as the dark matter relic density, the Higgs boson mass and, in particular, the anomalous magnetic moment of the muon (g − 2)μ. Since about two decades, (g − 2)μ suffers a puzzling about 3σ excessoftheexperimentallymeasuredvalueoverthetheoreticalprediction,whichour model is able to fully resolve. As the consequence of this resolution, our model predicts specific regions of the parameter space with the specific properties including light smuons and neutralinos, which could also potentially explain di-lepton excesses observed by CMS and ATLAS

Loving Outside the Neighborhood: The Conflicting Effects of External Linkages on Incremental Innovation in Clusters

[EN] The present study assesses the explanatory capacity of three levels of factors, namely, internal to the company, and internal and external to the cluster, in predicting firms' incremental innovative performance in cluster contexts. The empirical research conducted here focuses on a sample of 92 companies from the Spanish textile industrial cluster in Valencia. Findings reveal that the signifi- cant role played by firms' interorganizational ties as a moderating factor between absorptive capacity and their incremental innovative performance. Additionally, results reflect the differenti- ated roles developed by intra- and extra-cluster linkages in these interaction processes.Tomas Miquel, JV.; Molina-Morales, FX.; Expósito-Langa, M. (2019). Loving Outside the Neighborhood: The Conflicting Effects of External Linkages on Incremental Innovation in Clusters. Journal of Small Business Management. 57(4):1738-1756. https://doi.org/10.1111/jsbm.12439S17381756574Acs, Z., & Audretsch, D. (Eds.). (1991). Innovation and Technological Change. doi:10.3998/mpub.12958Antonelli, C. (2000). Collective Knowledge Communication and Innovation: The Evidence of Technological Districts. Regional Studies, 34(6), 535-547. doi:10.1080/00343400050085657Asheim B. andF.Belussi(2007) “Industrial Districts and Globalisation: Learning and Innovation in Local and Global Production and Innovation Systems ” Paper Presented at EIBA (European International Business Academy) Annual Conference on ‘International Business Local Development and Science‐Technology Relationships’ Catania Italy.Audretsch, D. B., & Lehmann, E. E. (2005). Does the Knowledge Spillover Theory of Entrepreneurship hold for regions? Research Policy, 34(8), 1191-1202. doi:10.1016/j.respol.2005.03.012Barney, J. (1991). Firm Resources and Sustained Competitive Advantage. Journal of Management, 17(1), 99-120. doi:10.1177/014920639101700108Bathelt, H., Malmberg, A., & Maskell, P. (2004). Clusters and knowledge: local buzz, global pipelines and the process of knowledge creation. Progress in Human Geography, 28(1), 31-56. doi:10.1191/0309132504ph469oaBell, G. G. (2005). Clusters, networks, and firm innovativeness. Strategic Management Journal, 26(3), 287-295. doi:10.1002/smj.448Bellandi, M. (1996). Innovation and Change in the Marshallian Industrial District. European Planning Studies, 4(3), 357-368. doi:10.1080/09654319608720351Belussi, F., & Sedita, S. R. (2009). Life Cycle vs. Multiple Path Dependency in Industrial Districts. European Planning Studies, 17(4), 505-528. doi:10.1080/09654310802682065Berman, S. L., Down, J., & Hill, C. W. L. (2002). TACIT KNOWLEDGE AS A SOURCE OF COMPETITIVE ADVANTAGE IN THE NATIONAL BASKETBALL ASSOCIATION. Academy of Management Journal, 45(1), 13-31. doi:10.2307/3069282Beugelsdijk S. andS.Smulders(2003). “Bridging and Bonded Social Capital: Which Type is Good for Economic Growth? ” Paper Presented at ERSA Conference Jyvaskila Finland.Bhaskaran, S. (2006). Incremental Innovation and Business Performance: Small and Medium-Size Food Enterprises in a Concentrated Industry Environment. Journal of Small Business Management, 44(1), 64-80. doi:10.1111/j.1540-627x.2006.00154.xBorgatti, S. P. (2005). Centrality and network flow. Social Networks, 27(1), 55-71. doi:10.1016/j.socnet.2004.11.008Boschma, R. A., & ter Wal, A. L. J. (2007). Knowledge Networks and Innovative Performance in an Industrial District: The Case of a Footwear District in the South of Italy. Industry & Innovation, 14(2), 177-199. doi:10.1080/13662710701253441Cantner, U., Joel, K., & Schmidt, T. (2011). The effects of knowledge management on innovative success – An empirical analysis of German firms. Research Policy, 40(10), 1453-1462. doi:10.1016/j.respol.2011.06.007Cattani, G., & Ferriani, S. (2008). A Core/Periphery Perspective on Individual Creative Performance: Social Networks and Cinematic Achievements in the Hollywood Film Industry. Organization Science, 19(6), 824-844. doi:10.1287/orsc.1070.0350Chandy, R. K., & Tellis, G. J. (2000). The Incumbent’s Curse? Incumbency, Size, and Radical Product Innovation. Journal of Marketing, 64(3), 1-17. doi:10.1509/jmkg.64.3.1.18033Cohen, W. M., & Levinthal, D. A. (1990). Absorptive Capacity: A New Perspective on Learning and Innovation. Administrative Science Quarterly, 35(1), 128. doi:10.2307/2393553Coombs, J. E., Deeds, D. L., & Duane Ireland, R. (2009). Placing the choice between exploration and exploitation in context: a study of geography and new product development. Strategic Entrepreneurship Journal, 3(3), 261-279. doi:10.1002/sej.74Dawson, J. F. (2013). Moderation in Management Research: What, Why, When, and How. Journal of Business and Psychology, 29(1), 1-19. doi:10.1007/s10869-013-9308-7De Martino, R., Mc Hardy Reid, D., & Zygliodopoulos, S. C. (2006). Balancing localization and globalization:exploring the impact of firm internationalization on a regional cluster. Entrepreneurship & Regional Development, 18(1), 1-24. doi:10.1080/08985620500397648Dewar, R. D., & Dutton, J. E. (1986). The Adoption of Radical and Incremental Innovations: An Empirical Analysis. Management Science, 32(11), 1422-1433. doi:10.1287/mnsc.32.11.1422DiMaggio, P. J., & Powell, W. W. (1983). The Iron Cage Revisited: Institutional Isomorphism and Collective Rationality in Organizational Fields. American Sociological Review, 48(2), 147. doi:10.2307/2095101Elche-Hortelano, D., Martínez-Pérez, Á., & García-Villaverde, P. M. (2015). Bonding capital, explotación de conocimiento e innovación incremental en los clusters de turismo cultural: las Ciudades Patrimonio de la Humanidad en España. Investigaciones Europeas de Dirección y Economía de la Empresa, 21(3), 120-128. doi:10.1016/j.iedee.2014.03.002Ellison, N. B., Steinfield, C., & Lampe, C. (2007). The Benefits of Facebook «Friends:» Social Capital and College Students’ Use of Online Social Network Sites. Journal of Computer-Mediated Communication, 12(4), 1143-1168. doi:10.1111/j.1083-6101.2007.00367.xEscribano, A., Fosfuri, A., & Tribó, J. A. (2009). Managing external knowledge flows: The moderating role of absorptive capacity. Research Policy, 38(1), 96-105. doi:10.1016/j.respol.2008.10.022Forsman, H., & Annala, U. (2011). Small enterprises as innovators: shift from a low performer to a high performer. International Journal of Technology Management, 56(2/3/4), 154. doi:10.1504/ijtm.2011.042980Freeman, L. C. (1978). Centrality in social networks conceptual clarification. Social Networks, 1(3), 215-239. doi:10.1016/0378-8733(78)90021-7Gibson, C. B., & Birkinshaw, J. (2004). THE ANTECEDENTS, CONSEQUENCES, AND MEDIATING ROLE OF ORGANIZATIONAL AMBIDEXTERITY. Academy of Management Journal, 47(2), 209-226. doi:10.2307/20159573Giuliani E.(2005). “The Structure of Cluster Knowledge Networks: Uneven and Selective Not Pervasive and Collective ” Paper Presented at the DRUID 10th Anniversary Summer Conference 2005 on “Dynamics of Industry and Innovation: Organizations Networks and Systems ” Copenhagen Denmark.Giuliani, E. (2007). The selective nature of knowledge networks in clusters: evidence from the wine industry. Journal of Economic Geography, 7(2), 139-168. doi:10.1093/jeg/lbl014Giuliani, E., & Bell, M. (2005). The micro-determinants of meso-level learning and innovation: evidence from a Chilean wine cluster. Research Policy, 34(1), 47-68. doi:10.1016/j.respol.2004.10.008Glasmeier, A. (1991). Technological discontinuities and flexible production networks: The case of Switzerland and the world watch industry. Research Policy, 20(5), 469-485. doi:10.1016/0048-7333(91)90070-7Granovetter, M. S. (1973). The Strength of Weak Ties. American Journal of Sociology, 78(6), 1360-1380. doi:10.1086/225469Gupta, A. K., Smith, K. G., & Shalley, C. E. (2006). The Interplay Between Exploration and Exploitation. Academy of Management Journal, 49(4), 693-706. doi:10.5465/amj.2006.22083026Hervas-Oliver, J.-L., Albors-Garrigos, J., de-Miguel, B., & Hidalgo, A. (2012). The role of a firm’s absorptive capacity and the technology transfer process in clusters: How effective are technology centres in low-tech clusters? Entrepreneurship & Regional Development, 24(7-8), 523-559. doi:10.1080/08985626.2012.710256Jansen, J. J. P., Van Den Bosch, F. A. J., & Volberda, H. W. (2005). Managing Potential and Realized Absorptive Capacity: How do Organizational Antecedents Matter? Academy of Management Journal, 48(6), 999-1015. doi:10.5465/amj.2005.19573106Jansen, J. J. P., Van Den Bosch, F. A. J., & Volberda, H. W. (2006). Exploratory Innovation, Exploitative Innovation, and Performance: Effects of Organizational Antecedents and Environmental Moderators. Management Science, 52(11), 1661-1674. doi:10.1287/mnsc.1060.0576Knoben, J. (2008). Localized inter-organizational linkages, agglomeration effects, and the innovative performance of firms. The Annals of Regional Science, 43(3), 757-779. doi:10.1007/s00168-008-0229-8Lam A.(1998). “Tacit knowledge Organisational Learning and Innovation: A Societal Perspective ” DRUID Working Paper 98–22 University of Kent Canterbury.Lane, P. J., Koka, B. R., & Pathak, S. (2006). The Reification of Absorptive Capacity: A Critical Review and Rejuvenation of the Construct. Academy of Management Review, 31(4), 833-863. doi:10.5465/amr.2006.22527456Lane, P. J., & Lubatkin, M. (1998). Relative absorptive capacity and interorganizational learning. Strategic Management Journal, 19(5), 461-477. doi:10.1002/(sici)1097-0266(199805)19:53.0.co;2-lLangfred, C. W. (2004). TOO MUCH OF A GOOD THING? NEGATIVE EFFECTS OF HIGH TRUST AND INDIVIDUAL AUTONOMY IN SELF-MANAGING TEAMS. Academy of Management Journal, 47(3), 385-399. doi:10.2307/20159588Maggioni, M. A., & Uberti, T. E. (2011). Networks and geography in the economics of knowledge flows. Quality & Quantity, 45(5), 1031-1051. doi:10.1007/s11135-011-9488-zMartin, R., & Sunley, P. (2006). Path dependence and regional economic evolution. Journal of Economic Geography, 6(4), 395-437. doi:10.1093/jeg/lbl012MASKELL, P. (2001). KNOWLEDGE CREATION AND DIFFUSION IN GEOGRAPHIC CLUSTERS. International Journal of Innovation Management, 05(02), 213-237. doi:10.1142/s1363919601000373Maskell, P., Bathelt, H., & Malmberg, A. (2006). Building global knowledge pipelines: The role of temporary clusters. European Planning Studies, 14(8), 997-1013. doi:10.1080/09654310600852332McEvily, B., & Zaheer, A. (1999). Bridging ties: a source of firm heterogeneity in competitive capabilities. Strategic Management Journal, 20(12), 1133-1156. doi:10.1002/(sici)1097-0266(199912)20:123.0.co;2-7Menzel, M.-P., & Fornahl, D. (2009). Cluster life cycles--dimensions and rationales of cluster evolution. Industrial and Corporate Change, 19(1), 205-238. doi:10.1093/icc/dtp036Molina-Morales, F. X., & Expósito-Langa, M. (2012). The impact of cluster connectedness on firm innovation: R&D effort and outcomes in the textile industry. Entrepreneurship & Regional Development, 24(7-8), 685-704. doi:10.1080/08985626.2012.710260Molina-Morales, F. X., & Martínez-Fernández, M. T. (2009). Too much love in the neighborhood can hurt: how an excess of intensity and trust in relationships may produce negative effects on firms. Strategic Management Journal, 30(9), 1013-1023. doi:10.1002/smj.766Narula, R. (2002). Innovation systems and ‘inertia’ in R&D location: Norwegian firms and the role of systemic lock-in. Research Policy, 31(5), 795-816. doi:10.1016/s0048-7333(01)00148-2O’brien, R. M. (2007). A Caution Regarding Rules of Thumb for Variance Inflation Factors. Quality & Quantity, 41(5), 673-690. doi:10.1007/s11135-006-9018-6PARRA-REQUENA, G., MOLINA-MORALES, F. X., & GARCÍA-VILLAVERDE, P. M. (2010). The Mediating Effect of Cognitive Social Capital on Knowledge Acquisition in Clustered Firms. Growth and Change, 41(1), 59-84. doi:10.1111/j.1468-2257.2009.00516.xParrilli, M. D., & Sacchetti, S. (2008). Linking learning with governance in networks and clusters: key issues for analysis and policy. Entrepreneurship & Regional Development, 20(4), 387-408. doi:10.1080/08985620801886463Peng, M. W., & Luo, Y. (2000). MANAGERIAL TIES AND FIRM PERFORMANCE IN A TRANSITION ECONOMY: THE NATURE OF A MICRO-MACRO LINK. Academy of Management Journal, 43(3), 486-501. doi:10.2307/1556406Pouder, R., & John, C. H. S. (1996). Hot Spots and Blind Spots: Geographical Clusters of Firms and Innovation. The Academy of Management Review, 21(4), 1192. doi:10.2307/259168Puga, D., & Trefler, D. (2010). Wake up and smell the ginseng: International trade and the rise of incremental innovation in low-wage countries. Journal of Development Economics, 91(1), 64-76. doi:10.1016/j.jdeveco.2009.01.011Ritala, P., & Hurmelinna-Laukkanen, P. (2012). Incremental and Radical Innovation in Coopetition-The Role of Absorptive Capacity and Appropriability. Journal of Product Innovation Management, 30(1), 154-169. doi:10.1111/j.1540-5885.2012.00956.xRitter, T. (1999). The Networking Company. Industrial Marketing Management, 28(5), 467-479. doi:10.1016/s0019-8501(99)00075-9Ritter, T., Wilkinson, I. F., & Johnston, W. J. (2002). Measuring network competence: some international evidence. Journal of Business & Industrial Marketing, 17(2/3), 119-138. doi:10.1108/08858620210419763Robertson, P. L., Jacobson, D., & Langlois, R. N. (s. f.). Innovation Processes and Industrial Districts. A Handbook of Industrial Districts. doi:10.4337/9781781007808.00034Schilling, M. A. (2005). A «Small-World» Network Model of Cognitive Insight. Creativity Research Journal, 17(2-3), 131-154. doi:10.1080/10400419.2005.9651475Schilling, M. A., & Phelps, C. C. (2007). Interfirm Collaboration Networks: The Impact of Large-Scale Network Structure on Firm Innovation. Management Science, 53(7), 1113-1126. doi:10.1287/mnsc.1060.0624Soosay, C. A., Hyland, P. W., & Ferrer, M. (2008). Supply chain collaboration: capabilities for continuous innovation. Supply Chain Management: An International Journal, 13(2), 160-169. doi:10.1108/13598540810860994Stam, W., & Elfring, T. (2008). Entrepreneurial Orientation and New Venture Performance: The Moderating Role of Intra- And Extraindustry Social Capital. Academy of Management Journal, 51(1), 97-111. doi:10.5465/amj.2008.30744031Stock, G. N., Greis, N. P., & Fischer, W. A. (2001). Absorptive capacity and new product development. The Journal of High Technology Management Research, 12(1), 77-91. doi:10.1016/s1047-8310(00)00040-7Subramaniam, M., & Youndt, M. A. (2005). The Influence of Intellectual Capital on the Types of Innovative Capabilities. Academy of Management Journal, 48(3), 450-463. doi:10.5465/amj.2005.17407911Tödtling, F., Lehner, P., & Kaufmann, A. (2009). Do different types of innovation rely on specific kinds of knowledge interactions? Technovation, 29(1), 59-71. doi:10.1016/j.technovation.2008.05.002Tsai, W., & Ghoshal, S. (1998). SOCIAL CAPITAL AND VALUE CREATION: THE ROLE OF INTRAFIRM NETWORKS. Academy of Management Journal, 41(4), 464-476. doi:10.2307/257085Tu, Q., Vonderembse, M. A., Ragu-Nathan, T. S., & Sharkey, T. W. (2005). Absorptive capacity: Enhancing the assimilation of time-based manufacturing practices. Journal of Operations Management, 24(5), 692-710. doi:10.1016/j.jom.2005.05.004Van der Panne, G., van Beers, C., & Kleinknecht, A. (2003). Success and Failure of Innovation: A Literature Review. International Journal of Innovation Management, 07(03), 309-338. doi:10.1142/s1363919603000830Varadarajan, R. (2009). Fortune at the bottom of the innovation pyramid: The strategic logic of incremental innovations. Business Horizons, 52(1), 21-29. doi:10.1016/j.bushor.2008.03.011Wasserman, S., & Faust, K. (1994). Social Network Analysis. doi:10.1017/cbo9780511815478Williams, D. (2006). On and Off the ’Net: Scales for Social Capital in an Online Era. Journal of Computer-Mediated Communication, 11(2), 593-628. doi:10.1111/j.1083-6101.2006.00029.xZahra, S. A., & George, G. (2002). Absorptive Capacity: A Review, Reconceptualization, and Extension. The Academy of Management Review, 27(2), 185. doi:10.2307/413435

Calculation of kinetic parameters βeff and Λ with modified open source Monte Carlo code OpenMC(TD)

This work presents the methodology used to expand the capabilities of the Monte Carlo code OpenMC for the calculation of reactor kinetic parameters: effective delayed neutron fraction βeff and neutron generation time Λ. The modified code, OpenMC(Time-Dependent) or OpenMC(TD), was then used to calculate the effective delayed neutron fraction by using the prompt method, while the neutron generation time was estimated using the pulsed method, fitting Λ to the decay of the neutron population. OpenMC(TD) is intended to serve as an alternative for the estimation of kinetic parameters when licensed codes are not available. The results obtained are compared to experimental data and MCNP calculated values for 18 benchmark configurations.Fil: Romero Barrientos, J.. Comision Chilena de Energia Nuclear; Chile. Universidad de Chile; ChileFil: Marquez Damian, Jose Ignacio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. European Spallation Source; SueciaFil: Molina, F.. Comision Chilena de Energia Nuclear; Chile. Universidad Andrés Bello; ChileFil: Zambra, M.. Comision Chilena de Energia Nuclear; Chile. Universidad Diego Portales; ChileFil: Aguilera, P.. Comision Chilena de Energia Nuclear; Chile. Universidad de Chile; ChileFil: López Usquiano, F.. Comision Chilena de Energia Nuclear; Chile. Universidad de Chile; ChileFil: Parra, B.. Instituto de Física Corpuscular; EspañaFil: Ruiz, A.. Comision Chilena de Energia Nuclear; Chile. Universidad de Chile; Chil

Wastewater treatment using microalgae: how realistic a contribution might it be to significant urban wastewater treatment?

Microalgae have been proposed as an option for wastewater treatment since the 1960’s but still this technology has not been expanded to an industrial scale. In this paper, the major factors limiting the performance of these systems are analysed. The composition of the wastewater is highly relevant, and especially the presence of pollutants such as heavy metals and emerging compounds. Biological and engineering aspects are also critical and have to be improved to at least approximate the performance of conventional systems, not just in terms of capacity and efficiency but also in terms of robustness. Finally, the harvesting of the biomass and its processing into valuable products poses a challenge; yet at the same time, an opportunity exists to increase economic profitability. Land requirement is a major bottleneck that can be ameliorated by improving the system’s photosynthetic efficiency. Land requirement has a significant impact on the economic balance but the profits from the biomass produced can enhance these systems’ reliability, especially in small cities

Design of energy control method for three-phase buck-type rectifier with very demanding load steps

Conventional three-phase rectifiers are controlled to achieve good power factor and low THD in the input. In the case of pulsating power loads, the fast dynamic response implies that the load pulses are reflected in the generator. These pulsating loads affect the life time operation of the generator, especially when it is not oversized (that is the case in aircraft applications). In order to smooth the power demanded from the generator, it is preferable to reduce the bandwidth of the controller to the rectifier but it affects its stability due to the fact that the right half plane pole given by the negative impedance of a constant power load requires high bandwidth control loop to compensate it. In this paper, an energy control method is proposed to employ the energy stored in the output capacitor of the rectifier to control the amount of power demanded through the rectifier. In such a way the bandwidth restriction for stability is eliminated and the bandwidth of the loop can be set slow enough to ensure smooth power demanded from the generator

The shade avoidance syndrome in Arabidopsis : the antagonistic role of phytochrome A and B differentiates vegetation proximity and canopy shade

Light limitation caused by dense vegetation is one of the greatest threats to plant survival in natural environments. Plants detect such neighboring vegetation as a reduction in the red to far-red ratio (R:FR) of the incoming light. The low R:FR signal, perceived by phytochromes, initiates a set of responses collectively known as the shade avoidance syndrome, intended to reduce the degree of current or future shade from neighbors by overtopping such competitors or inducing flowering to ensure seed production. At the seedling stage these responses include increased hypocotyl elongation. We have systematically analyzed the Arabidopsis seedling response and the contribution of phyA and phyB to perception of decreased R:FR, at three different levels of photosynthetically active radiation. Our results show that the shade avoidance syndrome, induced by phyB deactivation, is gradually antagonized by phyA, operating through the so-called FR-High Irradiance Response, in response to high FR levels in a range that simulates plant canopy shade. The data indicate that the R:FR signal distinguishes between the presence of proximal, but non-shading, neighbors and direct foliar shade, via a intrafamily photosensory attenuation mechanism that acts to suppress excessive reversion toward skotomorphogenic development under prolonged direct vegetation shade

Selection of native Tunisian microalgae for simultaneous wastewater treatment and biofuel production

This paper focuses on the selection of native microalgae strains suitable for wastewater treatment and biofuel production. Four Chlorophyceae strains were isolated from North-eastern Tunisia. Their performances were compared in continuous mode at a 0.3 1/day dilution rate. The biomass productivity and nutrient removal capacity of each microalgae strain were studied. The most efficient strain was identified as Scenedesmus sp. and experiments at different dilution rates from 0.2 to 0.8 1/day were carried out. Maximal biomass productivity of 0.92 g/L·day was obtained at 0.6 1/day. The removal of chemical oxygen demand (COD), ammonium and phosphorus was in the range of 92-94%, 61-99% and 93-99%, respectively. Carbohydrates were the major biomass fraction followed by lipids and then proteins. The saponifiable fatty acid content was in the 4.9-13.2% dry biomass range, with more than 50% of total fatty acids being composed of saturated and monosaturated fatty acids

Utilization of secondary-treated wastewater for the production of freshwater microalgae

In this work we studied the potential use of secondary-treated wastewater as nutrient source in the production of freshwater microalgae strains. Experiments were performed indoors in semicontinuous mode, at 0.3 day-1, simulating outdoor conditions. We demonstrated that all the tested strains can be produced by using only secondary-treated wastewater as the nutrient source. The utilization of secondary-treated wastewater imposes nutrient-limiting conditions, with maximal biomass productivity dropping to 0.5 g·l-1·day-1and modifies the biochemical composition of the biomass by increasing the amount of lipids and carbohydrates while reducing the biomass protein content. We measured fatty acids content and productivity of up to 25%d.wt. and 110 mg·l-1·day-1, respectively. We demonstrated that all the tested strains were capable of completely removing the nitrogen and phosphorus contained in the secondary-treated wastewater, and while the use of this effluent reduced the cells’ photosynthetic efficiency, the nitrogen and phosphorus coefficient yield increased. Muriellopsis sp. and S. subpicatus were selected as the most promising strains for outdoor production using secondary-treated wastewater as the culture medium; this was not only because of their high productivity but also their photosynthetic efficiency, of up to 2.5%, along with nutrient coefficient yields of up to 96 gbiomass·gN-1 and 166 gbiomass·gP-1. Coupling microalgae production processes to tertiary treatment in wastewater treatment plants makes it possible to recover nutrients contained in the water and to produce valuable biomass, especially where nutrient removal is required prior to wastewater discharge