Climate, soil or both? Which variables are better predictors of the distributions of Australian shrub species?

© 2017 Hageer et al. Background. Shrubs play a key role in biogeochemical cycles, prevent soil and water erosion, provide forage for livestock, and are a source of food, wood and non-wood products. However, despite their ecological and societal importance, the influence of different environmental variables on shrub distributions remains unclear.Weevaluated the influence of climate and soil characteristics, and whether including soil variables improved the performance of a species distribution model (SDM), Maxent. Methods. This study assessed variation in predictions of environmental suitability for 29 Australian shrub species (representing dominant members of six shrubland classes) due to the use of alternative sets of predictor variables. Models were calibrated with (1) climate variables only, (2) climate and soil variables, and (3) soil variables only. Results. The predictive power of SDMs differed substantially across species, but generally models calibrated with both climate and soil data performed better than those calibrated only with climate variables. Models calibrated solely with soil variables were the least accurate. We found regional differences in potential shrub species richness across Australia due to the use of different sets of variables. Conclusions. Our study provides evidence that predicted patterns of species richness may be sensitive to the choice of predictor set when multiple, plausible alternatives exist, and demonstrates the importance of considering soil properties when modeling availability of habitat for plants

Integrating pressure sensor control into semi-solid extrusion 3D printing to optimize medicine manufacturing

Semi-solid extrusion (SSE) is a three-dimensional printing (3DP) process that involves the extrusion of a gel or paste-like material via a syringe-based printhead to create the desired object. In pharmaceuticals, SSE 3DP has already been used to manufacture formulations for human clinical studies. To further support its clinical adoption, the use of a pressure sensor may provide information on the printability of the feedstock material in situ and under the exact printing conditions for quality control purposes. This study aimed to integrate a pressure sensor in an SSE pharmaceutical 3D printer for both material characterization and as a process analytical technology (PAT) to monitor the printing process. In this study, three materials of different consistency were tested (soft vaseline, gel-like mass and paste-like mass) under 12 different conditions, by changing flow rate, temperature, or nozzle diameter. The use of a pressure sensor allowed, for the first time, the characterization of rheological properties of the inks, which exhibited temperature-dependent, plastic and viscoelastic behaviours. Controlling critical material attributes and 3D printing process parameters may allow a quality by design (QbD) approach to facilitate a high-fidelity 3D printing process critical for the future of personalized medicine

Linking forest cover, soil erosion and mire hydrology to late-Holocene human activity and climate in NW Spain

This article is distributed under the terms of the Creative Commons Attribution-NonCommercial 3.0 License (http://www.creativecommons.org/licenses/by-nc/3.0/) which permits non-commercial use, reproduction and distribution of the work without further permission provided the original work is attributed as specified on the SAGE and Open Access page (http://www.uk.sagepub.com/aboutus/openaccess.htm).This article has been made available through the Brunel Open Access Publishing Fund.Forest clearance is one of the main drivers of soil erosion and hydrological changes in mires, although climate may also play a significant role. Because of the wide range of factors involved, understanding these complex links requires long-term multi-proxy approaches and research on the best proxies to focus. A peat core from NW Spain (Cruz do Bocelo mire), spanning the last ~3000 years, has been studied at high resolution by physical (density and loss on ignition (LOI)), geochemical (elemental composition) and palynological (pollen and non-pollen palynomorphs) analyses. Proxies related to mineral matter fluxes from the catchment (lithogenic tracers, Glomus and Entorrhiza), rainfall (Bromine), mire hydrology (HdV-18), human pressure (Cerealia-type, nitrophilous taxa and coprophilous fungi) and forest cover (mesophilous tree taxa) were the most useful to reconstruct the evolution of the mire and its catchment. Forest clearance for farming was one of the main drivers of environmental change from at least the local Iron Age (~2685 cal. yr BP) onwards. The most intense phase of deforestation occurred during Roman and Germanic times and the late Middle Ages. During these phases, the entire catchment was affected, resulting in enhanced soil erosion and severe hydrological modifications of the mire. Climate, especially rainfall, may have also accelerated these processes during wetter periods. However, it is noteworthy that the hydrology of the mire seems to have been insensitive to rainfall variations when mesophilous forest dominated. Abrupt changes were only detected once intense forest clearance commenced during the Iron Age/Roman transition (~2190 cal. yr BP) phase, which represented a tipping point in catchment's ability to buffer impacts. Overall, our findings highlight the importance of studying ecosystems' long-term trajectories and catchment-wide processes when implementing mire habitat protection measures.This work was funded by the projects CGL2010-20672 (Plan Nacional I+D+i, Spanish Ministry of Science and Innovation) and 10PXIB200182PR (General Directorate of I+D, Xunta de Galicia). N Silva-Sánchez and L López-Merino are currently supported by a FPU predoctoral scholarship (AP2010-3264) funded by the Spanish Government and a MINT postdoctoral fellowship funded by the Brunel Institute for the Environment, respectively

Pressure-dependent EPANET extension

In water distribution systems (WDSs), the available flow at a demand node is dependent on the pressure at that node. When a network is lacking in pressure, not all consumer demands will be met in full. In this context, the assumption that all demands are fully satisfied regardless of the pressure in the system becomes unreasonable and represents the main limitation of the conventional demand driven analysis (DDA) approach to WDS modelling. A realistic depiction of the network performance can only be attained by considering demands to be pressure dependent. This paper presents an extension of the renowned DDA based hydraulic simulator EPANET 2 to incorporate pressure-dependent demands. This extension is termed “EPANET-PDX” (pressure-dependent extension) herein. The utilization of a continuous nodal pressure-flow function coupled with a line search and backtracking procedure greatly enhance the algorithm’s convergence rate and robustness. Simulations of real life networks consisting of multiple sources, pipes, valves and pumps were successfully executed and results are presented herein. Excellent modelling performance was achieved for analysing both normal and pressure deficient conditions of the WDSs. Detailed computational efficiency results of EPANET-PDX with reference to EPANET 2 are included as well

On the structure of acyclic binary relations

We investigate the structure of acyclic binary relations from different points of view. On the one hand, given a nonempty set we study real-valued bivariate maps that satisfy suitable functional equations, in a way that their associated binary relation is acyclic. On the other hand, we consider acyclic directed graphs as well as their representation by means of incidence matrices. Acyclic binary relations can be extended to the asymmetric part of a linear order, so that, in particular, any directed acyclic graph has a topological sorting.This work has been partially supported by the research projects MTM2012-37894-C02-02, TIN2013-47605-P, ECO2015-65031-R, MTM2015-63608-P (MINECO/FEDER), TIN2016-77356-P and the Research Services of the Public University of Navarre (Spain)

Resource Competition Triggers the Co-Evolution of Long Tongues and Deep Corolla Tubes

Background: It is normally thought that deep corolla tubes evolve when a plant’s successful reproduction is contingent on having a corolla tube longer than the tongue of the flower’s pollinators, and that pollinators evolve ever-longer tongues because individuals with longer tongues can obtain more nectar from flowers. A recent model shows that, in the presence of pollinators with long and short tongues that experience resource competition, coexisting plant species can diverge in corolla-tube depth, because this increases the proportion of pollen grains that lands on co-specific flowers. Methodology/Principal Findings: We have extended the model to study whether resource competition can trigger the coevolution of tongue length and corolla-tube depth. Starting with two plant and two pollinator species, all of them having the same distribution of tongue length or corolla-tube depth, we show that variability in corolla-tube depth leads to divergence in tongue length, provided that increasing tongue length is not equally costly for both species. Once the two pollinator species differ in tongue length, divergence in corolla-tube depth between the two plant species ensues. Conclusions/Significance: Co-evolution between tongue length and corolla-tube depth is a robust outcome of the model, obtained for a wide range of parameter values, but it requires that tongue elongation is substantially easier for one pollinator species than for the other, that pollinators follow a near-optimal foraging strategy, that pollinators experienc

Terahertz metamaterials on flexible polypropylene substrate

The final publication is available at Springer via http://dx.doi.org/10.1007/s11468-014-9724-1In this work, we present a metamaterial working at terahertz frequencies made over a flexible polypropylene sub-strate. The experimental measurements, in accordance with the numerical calculations, show the metamaterial reliance on the impinging electric field polarization. The structure s symmetry yields purely electrical resonant responses eliminating bianisotropy effects. The widely used bendable polypropylene polymer may promote the insertion of metamaterial-based structures with special electromagnetic response in a number of objects of our daily lives such as textiles, automotive components, and sensingThis work was supported by the Spanish MICINN under contracts CONSOLIDER EMET CSD2008-00066 and TEC2011-28664-C02-02 and by the Universitat Politecnica de Valencia under the program INNOVA 2011.Ortuño Molinero, R.; García Meca, C.; Martínez Abietar, AJ. (2014). Terahertz metamaterials on flexible polypropylene substrate. Plasmonics. 9(5):1143-1147. https://doi.org/10.1007/s11468-014-9724-1S1143114795Smith DR, Padilla WJ, Vier DC, Nemat-Nasser SC, Schultz S (2000) Composite medium with simultaneously negative permeability and permittivity. Phys Rev Lett 84:4184–4187Pendry JB (2000) Negative refraction makes a perfect lens. Phys Rev Lett 85:3966–3969Zhang X, Liu Z (2008) Superlenses to overcome the diffraction limit. Nat Mater 7:435–441Pendry JB, Schurig D, Smith DR (2006) Controlling electromagnetic fields. Science 312:1780–1782Schurig D, Mock JJ, Justice BJ, Cummer SA, Pendry JB, Starr AF, Smith DR (2006) Metamaterial electromagnetic cloak at microwave frequencies. Science 314:977–980Rodríguez-Cantó PJ, Martínez-Marco M, Rodríguez-Fortuño FJ, Tomás-Navarro B, Ortuño R, Peransí-Llopis S, Martínez A (2011) Demonstration of near infrared gas sensing using gold nanodisks on functionalized silicon. Opt Express 19:7664–7672Rodríguez-Fortuño FJ, Martínez-Marco M, Tomás-Navarro B, Ortuño R, Martí J, Martínez A, Rodríguez-Cantó PJ (2011) Highly-sensitive chemical detection in the infrared regime using plasmonic gold nanocrosses. Appl Phys Lett 98:133118O’Hara FJ, Singh R, Brener I, Smirnova E, Han J, Taylor AJ, Zhang W (2008) Thin-film sensing with planar terahertz metamaterials: sensitivity and limitations. Opt Express 16:1786–1795Tao H, Landy NI, Bingham CM, Zhang X, Averitt RD, Padilla WJ (2008) A metamaterial absorber for the terahertz regime: design, fabrication and characterization. Opt Express 16:7181–7188Iwaszczuk K, Strikwerda AC, Fan K, Zhang X, Averitt RD, Jepsen PU (2012) Flexible metamaterial absorbers for stealth applications at terahertz frequencies. Opt Express 20:635–643Tao H, Bingham CM, Strikwerda AC, Pilon D, Shrekenhamer D, Landy NI, Fan K, Zhang X, Padilla WJ, Averitt RD (2008) Highly flexible wide angle of incidence terahertz metamaterial absorber: design, fabrication, and characterization. Phys Rev B 78:241103(R)Tao H, Bingham CM, Pilon D, Fan K, Strikwerda AC, Shrekenhamer D, Padilla WJ, Zhang X, Averitt RD (2010) A dual band terahertz metamaterial absorber. J Phys D: Appl Phys 43:225102Padilla WJ, Taylor AJ, Highstrete C, Lee M, Averitt RD (2006) Dynamical electric and magnetic metamaterial response at terahertz frequencies. Phys Rev Lett 96:107401Chen HT, Padilla WJ, Zide JMO, Gossard AC, Taylor AJ, Averitt RD (2006) Active terahertz metamaterial devices. Nature 444:597–600Chen HT, O’Hara FJ, Azad AK, Taylor AJ, Averitt RD, Shrekenhamer DB, Padilla WJ (2008) Experimental demonstration of frequency-agile terahertz metamaterials. Nature Photon 2:295–298Chen HT, Padilla WJ, Zide JMO, Bank SR, Gossard AC, Taylor AJ, Averitt RD (2007) Ultrafast optical switching of terahertz metamaterials fabricated on ErAs/GaAs nanoisland superlattices. Opt Lett 32:1620–1622Chen HT, Palit S, Tyler T, Bingham CM, Zide JMO, O’Hara FJ, Smith DR, Gossard AC, Averitt RD, Padilla WJ, Jokerst NM, Taylor AJ (2008) Hybrid metamaterials enable fast electrical modulation of freely propagating terahertz waves. Appl Phys Lett 93:091117Chen HT, Padilla WJ, Cich MJ, Azad AK, Averitt RD, Taylor AJ (2009) A metamaterial solid-state terahertz phase modulator. Nat Photon 3:148Driscoll T, Andreev GO, Basov DN, Palit S, Cho SY, Jokerst NM, Smith DR (2007) Tuned permeability in terahertz split-ring resonators for devices and sensors. Appl Phys Lett 91:062511Debus C, Bolivar PH (2007) Frequency selective surfaces for high sensitivity terahertz sensing. Appl Phys Lett 91:184102Al-Naib IAI, Jansen C, Koch M (2008) Thin-film sensing with planar asymmetric metamaterial resonators. Appl Phys Lett 93:083507Leonhardt U, Philbin TG (2010) Geometry and light: the science of invisibility. Dover, MineolaDi Falco A, Ploschner M, Krauss TF (2010) Flexible metamaterials at visible wavelengths. New J Phys 12:113006Tao H, Strikwerda AC, Fan K, Bingham CM, Padilla WJ, Zhang X, Averitt RD (2008) Terahertz metamaterials on free-standing highly-flexible polyimide substrates. Appl Phys 41:232004Tao H, Amsden JJ, Strikwerda AC, Fan K, Kaplan DL, Zhang X, Averitt RD, Omenetto FJ (2010) Metamaterial silk composites at terahertz frequencies. Adv Mater 22:3527–3531Chen ZC, Han NR, Pan ZY, Gong YD, Chong TC, Hong MH (2011) Tunable resonance enhancement of multi-layer terahertz metamaterials fabricated by parallel laser micro-lens array lithography on flexible substrates. Opt Mat Express 1:151–157Miyamaru F, Takeda MW, Taima K (2009) Characterization of terahertz metamaterials fabricated on flexible plastic films: toward fabrication of bulk metamaterials in terahertz region. Appl Phys Express 2:042001Peralta XG, Wanke MC, Arrington CL, Williams JD, Brener I, Strikwerda A, Averitt RD, Padilla WJ, Smirnova W, Taylor AJ, O’Hara FJ (2009) Large-area metamaterials on thin membranes for multilayer and curved applications at terahertz and higher frequencies. Appl Phys Lett 94:161113Choi M, Lee SH, Kim Y, Kang SB, Shin J, Kwak MH, Kang KY, Lee YH, Park N, Min B (2011) A terahertz metamaterial with unnaturally high refractive index. Nature 470:369–373Han NR, Chen ZC, Lim CS, Ng B, Hong MH (2011) Broadband multi-layer terahertz metamaterials fabrication and characterization on flexible substrates. Opt Express 19:6990–6998Aznabet M, Navarro-Cia N, Kuznetsov SA, Gelfand AV, Fedorinina NI, Goncharov YG, Beruete M, Mrabet OE, Sorolla M (2008) Polypropylene-substrate-based SRR- and CSRR- metasurfaces for submillimeter waves. Opt Express 16:18312–18319Padilla WJ, Aronsson MT, Highstrete C, Lee M, Taylor AJ, Averitt RD (2007) Electrically resonant terahertz metamaterials: theoretical and experimental investigations. Phys Rev B 75:041102(R)Chen HT, O’Hara FJ, Taylor AJ, Averitt RD, Highstrete C, Lee M, Padilla WJ (2007) Complementary planar terahertz metamaterials. Opt Express 15:1084–1095Pendry JB, Holden AJ, Robbins DJ, Stewart WJ (1999) Magnetism from conductors and enhanced nonlinear phenomena. IEEE Trans Microwave Theory Tech 47:2075–208

Neuroimaging of Inflammation in Memory and Related Other Disorders (NIMROD) study protocol: a deep phenotyping cohort study of the role of brain inflammation in dementia, depression and other neurological illnesses

$\textit{Introduction}$ Inflammation of the central nervous system is increasingly regarded as having a role in cognitive disorders such as dementia and depression, but it is not clear how such neuroinflammation relates to other aspects of neuropathology (e.g., tau and amyloid pathology) as well as to structural and functional changes in the brain and symptoms (as assessed via MRI and clinical and neuropsychological assessment). This study will explore these pathophysiological mechanisms using positron emission tomography (PET) which allows $\textit{in vivo}$ imaging of inflammation, amyloid and tau deposition, together with neuropsychological profiling, magnetic resonance imaging (MRI) and peripheral biomarker analysis. \textit{Methods & analysis} Using PET imaging of the ligand [11C]PK11195 we will test for increased neuroinflammation $\textit{in vivo}$ in patients with Alzheimer’s disease, Lewy body dementia, frontotemporal dementia, progressive supranuclear palsy, late onset depression and mild cognitive impairment, when compared to healthy controls. We will assess whether areas of inflammatory change are associated with amyloid and tau deposition (assessed using $^{11}$C-labelled Pittsburgh Compound B ([$^{11}$C]PiB) and $^{18}$F-labelled AV-1451 respectively), as well as structural and functional connectivity changes found on MRI. Inflammatory biomarker analysis and immune-phenotyping of peripheral blood monocytes will determine the correlation between central (i.e., neural) and peripheral inflammation. Finally, we will examine whether neuroinflammatory changes seen on PET imaging are associated with global and domain specific cognitive impairments, or predict cognitive decline over 12 months. \textit{Ethics & dissemination} The study protocol was approved by the local ethics committee, East of England - Cambridge Central Research Ethics Committee (reference: 13/EE/0104). The study is also ARSAC approved as part of this process. Data will be disseminated by presentation at national and international conferences and by publication, predominantly in journals of neuroscience as well as clinical neurology and psychiatry. $\textit{Strengths}$ Multimodal deep phenotyping Comparisons between diseases as well as with controls Longitudinal neuropsychology data Comparison of central and peripheral inflammation $\textit{Weaknesses}$ Lack of longitudinal neuroimaging Not a prospective study, unable to assess causationThe study is funded by the UK National Institute of Health Research Cambridge Biomedical Research Unit in Dementia (Project 4 - RNAG/293). JBR is supported by the Wellcome Trust (103838). JPC is supported by the UK National Institute of Health Research Biomedical Research Centre at Cambridge. PVR is supported by the PSP Association

Presence and Persistence of Ebola or Marburg Virus in Patients and Survivors: A Rapid Systematic Review

Background: The 2013-15 Ebola outbreak was unprecedented due to sustainedtransmission within urban environments and thousands of survivors. In 2014 the World Health Organization stated that there was insufficient evidence to give definitive guidance about which body fluids are infectious and when they pose a risk to humans. We report a rapid systematic review of published evidence on the presence of filoviruses in body fluids of infected people and survivors. Methods: Scientific articles were screened for information about filovirus in human body fluids. The aim was to find primary data that suggested high likelihood of actively infectious filovirus in human body fluids (viral RNA). Eligible infections were from Marburg virus (MARV or RAVV) and Zaire, Sudan, Taï Forest and Bundibugyo species of Ebola. [1] Cause of infection had to be laboratory confirmed (in practice either tissue culture or RT-PCR tests), or evidenced by compatible clinical history with subsequent positivity for filovirus antibodies or inflammatory factors. Data were extracted and summarized narratively. Results: 6831 unique articles were found, and after screening, 33 studies were eligible. For most body fluid types there were insufficient patients to draw strong conclusions, and prevalence of positivity was highly variable. Body fluids taken >16 days after onset were usually negative. In the six studies that used both assay methods RT-PCR tests for filovirus RNA gave positive results about 4 times more often than tissue culture. Conclusions: Filovirus was reported in most types of body fluid, but not in every sample from every otherwise confirmed patient. Apart from semen, most non-blood, RT-PCR positive samples are likely to be culture negative and so possibly of low infectious risk. Nevertheless, it is not apparent how relatively infectious many body fluids are during or after illness, even when culture-positive, not least because most test results come from more severe cases. Contact with blood and blood-stained body fluids remains the major risk for disease transmission because of the known high viral loads in blood