Inverse Low Gain Avalanche Detectors (iLGADs) for precise tracking and timing applications

Low Gain Avalanche Detector (LGAD) is the baseline sensing technology of the recently proposed Minimum Ionizing Particle (MIP) end-cap timing detectors (MTD) at the Atlas and CMS experiments. The current MTD sensor is designed as a multi-pad matrix detector delivering a poor position resolution, due to the relatively large pad area, around 1 $mm^2$; and a good timing resolution, around 20-30 ps. Besides, in his current technological incarnation, the timing resolution of the MTD LGAD sensors is severely degraded once the MIP particle hits the inter-pad region since the signal amplification is missing for this region. This limitation is named as the LGAD fill-factor problem. To overcome the fill factor problem and the poor position resolution of the MTD LGAD sensors, a p-in-p LGAD (iLGAD) was introduced. Contrary to the conventional LGAD, the iLGAD has a non-segmented deep p-well (the multiplication layer). Therefore, iLGADs should ideally present a constant gain value over all the sensitive region of the device without gain drops between the signal collecting electrodes; in other words, iLGADs should have a 100${\%}$ fill-factor by design. In this paper, tracking and timing performance of the first iLGAD prototypes is presented.Comment: Conference Proceedings of VCI2019, 15th Vienna Conference of Instrumentation, February 18-22, 2019, Vienna, Austri

On the Amplitude of Convective Velocities in the Deep Solar Interior

We obtain lower limits on the amplitude of convective velocities in the deep solar convection zone based only on the observed properties of the differential rotation and meridional circulation together with simple and robust dynamical balances obtained from the fundamental MHD equations. The linchpin of the approach is the concept of gyroscopic pumping whereby the meridional circulation across isosurfaces of specific angular momentum is linked to the angular momentum transport by the convective Reynolds stress. We find that the amplitude of the convective velocity must be at least 30 m s$^{-1}$ in the upper CZ ($r \sim 0.95 R$) and at least 8 m s$^{-1}$ in the lower CZ ($r \sim 0.75 R$) in order to be consistent with the observed mean flows. Using the base of the near-surface shear layer as a probe of the rotational influence, we are further able to show that the characteristic length scale of deep convective motions must be no smaller than 5.5--30 Mm. These results are compatible with convection models but suggest that the efficiency of the turbulent transport assumed in advection-dominated flux-transport dynamo models is generally not consistent with the mean flows they employ.Comment: 16 pages, 4 figures, accepted to the Astrophysical Journa

Reseñas

Allouch, Jean. Marguerite ou l'Aimée de lacan (Margarita o la amada de lacan) E.P.E.L., parís. 1990. / Gay Peter. Freud: una vida de nuestro tiempo. Ed. Paidós. Barcelona, 1989. / Moreno Duran, Rafael H. Taberna in fabula: la experiencia leída Monteavila editores, Caracas, 1992. / Safoun, Moustapha. El inconsciente y su escriba. Ed. Paidós, Argentina, 1985. Wiesel, Eli. El crepúsculo a lo lejos Ed. Norma, Col. La otra orilla, Bogotá, 1991

Structural study of the type II 3-dehydroquinate dehydratase from Actinobacillus pleuropneumoniae

9 pages, 7 figures, 2 tables.The structure of the type II dehydroquinate dehydratase (DHQase) from Actinobacillus pleuropneumoniae, the third enzyme of the shikimate pathway, has been determined. Crystals diffracting to 1.7 Å were obtained in space and on earth using the counter-diffusion technique. The structure was solved using molecular replacement and refined to high resolution. The overall structure of the dodecameric enzyme is described and compared with structures of DHQases from other bacteria. DHQases contain a flexible loop that presumably closes over the active site upon substrate binding. The enzyme can exist in an open or closed conformation. The present structure displays the open conformation, with a sulfate anion bound in the active site. The availability of this structure opens a route to structure-based antibiotics targetting this pathogenic bacterium.We thank Professor Kabsch for providing XDS free of charge. We acknowledge the support of the European Space Agency and the European Community Action to Research Infrastructure Action of the Improving Human Potential Programme to the EMBL Hamburg Outstation, contract No. HPRI-CT-1999-00017. We thank Olivier Minster (ESA) for his support of space science. The authors acknowledge the excellent work of Dr Eva ManÄ as in managing the logistics concerning the space mission. We thank Viscount Dirk Frimout for his support for space crystallization experiments.Peer reviewe

Reseñas

Allouch, Jean. Marguerite ou l'Aimée de lacan (Margarita o la amada de lacan) E.P.E.L., parís. 1990. / Gay Peter. Freud: una vida de nuestro tiempo. Ed. Paidós. Barcelona, 1989. / Moreno Duran, Rafael H. Taberna in fabula: la experiencia leída Monteavila editores, Caracas, 1992. / Safoun, Moustapha. El inconsciente y su escriba. Ed. Paidós, Argentina, 1985. Wiesel, Eli. El crepúsculo a lo lejos Ed. Norma, Col. La otra orilla, Bogotá, 1991

Impacts of thinning of a Mediterranean oak forest on soil properties influencing water infiltration

In Mediterranean ecosystems, special attention needs to be paid to forest-water relationships due to water scarcity. In this context, Adaptive Forest Management (AFM) has the objective to establish how forest resources have to be managed with regards to the efficient use of water, which needs maintaining healthy soil properties even after disturbance. The main objective of this investigation was to understand the effect of one of the AFM methods, namely forest thinning, on soil hydraulic properties. At this aim, soil hydraulic characterization was performed on two contiguous Mediterranean oak forest plots, one of them thinned to reduce the forest density from 861 to 414 tree per ha. Three years after the intervention, thinning had not affected soil water permeability of the studied plots. Both ponding and tension infiltration runs yielded not significantly different saturated, Ks, and unsaturated, K-20, hydraulic conductivity values at the thinned and control plots. Therefore, thinning had no an adverse effect on vertical water fluxes at the soil surface. Mean Ks values estimated with the ponded ring infiltrometer were two orders of magnitude higher than K-20 values estimated with the minidisk infiltrometer, revealing probably soil structure with macropores and fractures . The input of hydrophobic organic matter, as a consequence of the addition of plant residues after the thinning treatment, resulted in slight differences in terms of both water drop penetration time, WDPT, and the index of water repellency, R, between thinned and control plots. Soil water repellency only affected unsaturated soil hydraulic conductivity measurements. Moreover, K-20 values showed a negative correlation with both WDPT and R, whereas Ks values did not, revealing that the soil hydrophobic behavior has no impact on saturated hydraulic conductivity

Functional upgrading in China’s export processing sector

Functional upgrading occurs when a firm acquires more sophisticated functions within an existing value chain. In this paper, we analyze if there is evidence of this type of upgrading in China’s export processing regime by investigating dynamics in the relative prevalence of Import & Assembly (IA) versus Pure Assembly (PA) processing trade over the period 2000-2013. Firms in both regimes provide similar manufacturing services to foreign companies, but IA firms also conduct the sophisticated tasks of quality control, searching, financing and storing imported materials. Consistent with a trend of functional upgrading, we show that the share of IA trade in total processing trade has increased rapidly during the period 2000-2006, both overall and within product categories. Furthermore, we find that this trend has gone hand in hand with improvements in a sector’s labor productivity and unit values. Against expectations, we find that this process has slowed down notably during the period 2006-2013.status: publishe

Cherry-stones-based activated carbons as potential adsorbents for CO2/CH4 separation: effect of the activation parameters

This is the accepted version of the following article: Álvarez-Gutiérrez, N., Victoria Gil, M., Rubiera, F. and Pevida, C. (2015), Cherry-stones-based activated carbons as potential adsorbents for CO2/CH4 separation: effect of the activation parameters. Greenhouse Gas Sci Technol, 5: 812–825. doi: 10.1002/ghg.1534, which has been published in final form at http://dx.doi.org/10.1002/ghg.1534A low-cost biomass, cherry stones (CS), was used as a carbon precursor to synthesize two activated carbons to be used for CO2/CH4 separation. Single-step activation with two activating agents, carbon dioxide and steam, was used. The activation conditions that maximize the CO2 adsorption capacity by the adsorbents at 25 ºC and atmospheric pressure were determined by response surface methodology (RSM). The optimum values were 885 ºC and 12% of solid yield when activating with carbon dioxide, but 850 ºC and 15.3% of solid yield when activating with steam. Heating rate did not show a significant effect on the CO2 uptake. CO2 adsorption capacity values up to 11.45 and 10.56 wt.% were achieved under such conditions using carbon dioxide and steam as activating agents, respectively. Carbon dioxide activation promoted the development of microporosity, whereas both micropores and mesopores were developed during steam activation. The CO2/CH4 separation performance at 3 bar of the optimum adsorbents indicated that both cherry-stones-based activated carbons could have great potential as CO2 adsorbents for CO2/CH4 separation. The adsorbent activated with carbon dioxide, CS-CO2, showed a slightly higher adsorption capacity, but the steam-activated sample, CS-H2O, had an enhanced selectivity to separate CO2 from CO2/CH4 binary mixtures.This work was carried out with financial support from the Spanish MINECO (Project ENE2011-23467), co-financed by the European Regional Development Fund (ERDF) and from the Gobierno del Principado de Asturias (PCTI-GRUPIN14-079)Peer reviewe

From Geometry to Numerics: interdisciplinary aspects in mathematical and numerical relativity

This article reviews some aspects in the current relationship between mathematical and numerical General Relativity. Focus is placed on the description of isolated systems, with a particular emphasis on recent developments in the study of black holes. Ideas concerning asymptotic flatness, the initial value problem, the constraint equations, evolution formalisms, geometric inequalities and quasi-local black hole horizons are discussed on the light of the interaction between numerical and mathematical relativists.Comment: Topical review commissioned by Classical and Quantum Gravity. Discussion inspired by the workshop "From Geometry to Numerics" (Paris, 20-24 November, 2006), part of the "General Relativity Trimester" at the Institut Henri Poincare (Fall 2006). Comments and references added. Typos corrected. Submitted to Classical and Quantum Gravit

Organised crime and international aid subversion: evidence from Colombia and Afghanistan

Scholarly attempts to explain aid subversion in post-conflict contexts frame the challenge in terms of corrupt practices and transactions disconnected from local power struggles. Also, they assume a distinction between organised crime and the state. This comparative analysis of aid subversion in Colombia and Afghanistan reveals the limits of such an approach. Focusing on relations that anchor organised crime within local political, social and economic processes, we demonstrate that organised crime is dynamic, driven by multiple motives, and endogenous to local power politics. Better understanding of governance arrangements around the organised crime-conflict nexus which enable aid subversion is therefore required