What is different about living alone with cancer in older age? A qualitative study of experiences and preferences for care

Background: Increasing numbers of older patients with advanced cancer live alone but there is little research on how well health services meet their needs. The aim of this study was to compare the experiences and future preferences for care between two groups of older people with cancer in their last year of life; those who live alone, and those who live with co-resident carers. Methods: In-depth qualitative interviews were conducted with 32 people aged between 70 and 95 years who were living with cancer. They were recruited from general practices and hospice day care, when the responsible health professional answered no to the question, of whether they would be surprised if the patient died within twelve months. Twenty participants lived alone. Interviews were recorded and transcribed and the data analysed using a Framework approach, focussing on the differences and commonalities between the two groups. Results: Many experiences were common to all participants, but had broader consequences for people who lived alone. Five themes are presented from the data: a perception that it is a disadvantage to live alone as a patient, the importance of relational continuity with health professionals, informal appraisal of care, place of care and future plans. People who lived alone perceived emotional and practical barriers to accessing care, and many shared an anxiety that they would have to move into a care home. Participants were concerned with remaining life, and all who lived alone had made plans for death but not for dying. Uncertainty of timescales and a desire to wait until they knew that death was imminent were some of the reasons given for not planning for future care needs. Conclusions: Older people who live alone with cancer have emotional and practical concerns that are overlooked by their professional carers. Discussion and planning for the future, along with continuity in primary care may hold the key to enhancing end-of-life care for this group of patients

Using new technologies to promote weight management: a randomised controlled trial study protocol

Background: Over the last three decades, overweight and obesity and the associated health consequences have become global public health priorities. Methods that have been tried to address this problem have not had the desired impact, suggesting that other approaches need to be considered. One of the lessons learned throughout these attempts is that permanent weight loss requires sustained dietary and lifestyle changes, yet adherence to weight management programs has often been noted as one of the biggest challenges. This trial aims to address this issue by examining whether social media, as a potential health promotion tool, will improve adherence to a weight management program. To test the effectiveness of this measure, the designated program will be delivered via the popular social networking site Facebook, and compared to a standard delivery method that provides exactly the same content but which is communicated through a pamphlet. The trial will be conducted over a period of twelve weeks, with a twelve week follow-up. Although weight loss is expected, this study will specifically investigate the effectiveness of social media as a program delivery method. The program utilised will be one that has already been proven to achieve weight loss, namely The CSIRO Total Wellbeing Diet.Methods/design: This project will be conducted as a 3-arm randomised controlled trial. One hundred and twenty participants will be recruited from the Perth community, and will be randomly assigned to one of the following three groups: the Facebook group, the pamphlet group, or a control group. The Facebook Group will receive the weight management program delivered via a closed group in Facebook, the Pamphlet Group will be given the same weight management program presented in a booklet, and the Control Group will follow the Australian Dietary Guidelines and the National Physical Activity Guidelines for Adults as usual care. Change in weight, body composition and waist circumference will be initial indicators of adherence to the program. Secondary outcome measures will be blood glucose, insulin, blood pressure, arterial stiffness, physical activity, eating behaviour, mental well-being (stress, anxiety, and depression), social support, self-control, self-efficacy, Facebook activity, and program evaluation. Discussion: It is expected that this trial will support the use of social media - a source of social support and information sharing - as a delivery method for weight management programs, enhancing the reduction in weight expected from dietary and physical activity changes. Facebook is a popular, easy to access and cost-effective online platform that can be used to assist the formation of social groups, and could be translated into health promotion practice relatively easily. It is anticipated in the context of the predicted findings that social media will provide an invaluable resource for health professionals and patients alike

Silk garments plus standard care compared with standard care for treating eczema in children: a randomised controlled, observer blind, pragmatic trial (CLOTHES Trial)

Background The role of clothing in the management of eczema (syn. atopic dermatitis, atopic eczema) is poorly understood. This trial evaluated the effectiveness and cost-effectiveness of silk garments (in addition to standard care) for the management of eczema in children with moderate to severe disease. Methods and findings This was a parallel group randomised controlled, observer-blind trial. Children aged 1 to 15 years with moderate to severe eczema were recruited from secondary care and the community in five UK centres. Participants were allocated using on-line randomisation (1:1) to standard care, or standard care plus silk garments; stratified by age and recruiting centre. Silk garments were worn for 6 months. Primary outcome (eczema severity) was assessed at baseline, 2, 4 and 6 months, by nurses blinded to treatment allocation using the Eczema Area and Severity Index (EASI), which was log-transformed for analysis (intention-to-treat analysis). Safety outcome: number of skin infections. Three hundred children were randomised (26th Nov 2013 to 5th May 2015): 42% girls, 79% white, mean age 5 years. Primary analysis included 282/300 (94%) children (n = 141 in each group). The garments were worn more often at night than in the day (median of 81% of nights (25th to 75th centile 57% to 96%) and 34% of days (25th to 75th centile 10% to 76%)). Geometric mean EASI scores at baseline, 2, 4 and 6 months were 9·2, 6·4, 5·8, 5·4 for silk clothing and 8·4, 6·6, 6·0, 5·4 for standard care. There was no evidence of any difference between the groups in EASI score averaged over all follow up visits adjusted for baseline EASI score, age and centre (adjusted ratio of geometric means: 0·95, 95% CI 0·85 to 1·07). This confidence interval is equivalent to a difference of -1·5 to 0·5 in the original EASI scale units which is not clinically important. Skin infections occurred in 36/142 (25%) and 39/141 (28%) for silk clothing and standard care respectively. Even if the small observed treatment effect was genuine, the incremental cost per QALY was £56,881 in the base case analysis from an NHS perspective, suggesting that silk garments are unlikely to be cost-effective within currently accepted thresholds. Main limitations: whilst minimising detection bias, use of an objective primary outcome may have underestimated treatment effects. Conclusions Silk clothing is unlikely to provide additional benefit over standard care in children with moderate to severe eczema

Processed pseudogenes acquired somatically during cancer development

Cancer evolves by mutation, with somatic reactivation of retrotransposons being one such mutational process. Germline retrotransposition can cause processed pseudogenes, but whether this occurs somatically has not been evaluated. Here we screen sequencing data from 660 cancer samples for somatically acquired pseudogenes. We find 42 events in 17 samples, especially non-small cell lung cancer (5/27) and colorectal cancer (2/11). Genomic features mirror those of germline LINE element retrotranspositions, with frequent target-site duplications (67%), consensus TTTTAA sites at insertion points, inverted rearrangements (21%), 5′ truncation (74%) and polyA tails (88%). Transcriptional consequences include expression of pseudogenes from UTRs or introns of target genes. In addition, a somatic pseudogene that integrated into the promoter and first exon of the tumour suppressor gene, MGA, abrogated expression from that allele. Thus, formation of processed pseudogenes represents a new class of mutation occurring during cancer development, with potentially diverse functional consequences depending on genomic context

Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET

Effect of ELMs on fuel retention at the bulk W target of JET ITER-Like Wall was studied with multi-scale calculations. Plasma input parameters were taken from ELMy H-mode plasma experiment. The energetic intra-ELM fuel particles get implanted and create near-surface defects up to depths of few tens of nm, which act as the main fuel trapping sites during ELMs. Clustering of implantation-induced vacancies were found to take place. The incoming flux of inter-ELM plasma particles increases the different filling levels of trapped fuel in defects. The temperature increase of the W target during the pulse increases the fuel detrapping rate. The inter-ELM fuel particle flux refills the partially emptied trapping sites and fills new sites. This leads to a competing effect on the retention and release rates of the implanted particles. At high temperatures the main retention appeared in larger vacancy clusters due to increased clustering rate

Polygenic Risk Scores for Prediction of Breast Cancer and Breast Cancer Subtypes

Stratification of women according to their risk of breast cancer based on polygenic risk scores (PRSs) could improve screening and prevention strategies. Our aim was to develop PRSs, optimized for prediction of estrogen receptor (ER)-specific disease, from the largest available genome-wide association dataset and to empirically validate the PRSs in prospective studies. The development dataset comprised 94,075 case subjects and 75,017 control subjects of European ancestry from 69 studies, divided into training and validation sets. Samples were genotyped using genome-wide arrays, and single-nucleotide polymorphisms (SNPs) were selected by stepwise regression or lasso penalized regression. The best performing PRSs were validated in an independent test set comprising 11,428 case subjects and 18,323 control subjects from 10 prospective studies and 190,040 women from UK Biobank (3,215 incident breast cancers). For the best PRSs (313 SNPs), the odds ratio for overall disease per 1 standard deviation in ten prospective studies was 1.61 (95%CI: 1.57-1.65) with area under receiver-operator curve (AUC) = 0.630 (95%CI: 0.628-0.651). The lifetime risk of overall breast cancer in the top centile of the PRSs was 32.6%. Compared with women in the middle quintile, those in the highest 1% of risk had 4.37- and 2.78-fold risks, and those in the lowest 1% of risk had 0.16- and 0.27-fold risks, of developing ER-positive and ER-negative disease, respectively. Goodness-of-fit tests indicated that this PRS was well calibrated and predicts disease risk accurately in the tails of the distribution. This PRS is a powerful and reliable predictor of breast cancer risk that may improve breast cancer prevention programs.NovartisEli Lilly and CompanyAstraZenecaAbbViePfizer UKCelgeneEisaiGenentechMerck Sharp and DohmeRocheCancer Research UKGovernment of CanadaArray BioPharmaGenome CanadaNational Institutes of HealthEuropean CommissionMinistère de l'Économie, de l’Innovation et des Exportations du QuébecSeventh Framework ProgrammeCanadian Institutes of Health Researc

First mirror test in JET for ITER: Complete overview after three ILW campaigns

The First Mirror Test for ITER has been carried out in JET with mirrors exposed during: (i) the third ILW campaign (ILW-3, 2015–2016, 23.33 h plasma) and (ii) all three campaigns, i.e. ILW-1 to ILW-3: 2011–2016, 63,52 h in total. All mirrors from main chamber wall show no significant changes of the total reflectivity from the initial value and the diffuse reflectivity does not exceed 3% in the spectral range above 500 nm. The modified layer on surface has very small amount of impurities such as D, Be, C, N, O and Ni. All mirrors from the divertor (inner, outer, base under the bulk W tile) lost reflectivity by 20–80% due to the beryllium-rich deposition also containing D, C, N, O, Ni and W. In the inner divertor N reaches 5×10$^{17}$ cm$^{-2}$, W is up to 4.3×10$^{17}$ cm$^{-2}$, while the content of Ni is the greatest in the outer divertor: 3.8×10$^{17}$ cm$^{-2}$. Oxygen-18 used as the tracer in experiments at the end of ILW-3 has been detected at the level of 1.1×10$^{16}$ cm$^{-2}$. The thickness of deposited layer is in the range of 90 nm to 900 nm. The layer growth rate in the base (2.7 pm s$^{-1}$) and inner divertor is proportional to the exposure time when a single campaign and all three are compared. In a few cases, on mirrors located at the cassette mouth, flaking of deposits and erosion occurred

First mirror test in JET for ITER : complete overview after three ILW campaigns

The First Mirror Test for ITER has been carried out in JET with mirrors exposed during: (i) the third ILW campaign (ILW-3, 2015-2016, 23.33 h plasma) and (ii) all three campaigns, i.e. ILW-1 to ILW-3: 2011-2016, 63,52 h in total. All mirrors from main chamber wall show no significant changes of the total reflectivity from the initial value and the diffuse reflectivity does not exceed 3% in the spectral range above 500 nm. The modified layer on surface has very small amount of impurities such as D, Be, C, N, O and Ni. All mirrors from the divertor (inner, outer, base under the bulk W tile) lost reflectivity by 20-80% due to the beryllium-rich deposition also containing D, C, N, O, Ni and W. In the inner divertor N reaches 5 x 10(17) cm(-2), W is up to 4.3 x 10(17) cm(-2), while the content of Ni is the greatest in the outer divertor: 3.8 x 10(17) cm(-2). Oxygen-18 used as the tracer in experiments at the end of ILW-3 has been detected at the level of 1.1 x 10(16) cm(-2). The thickness of deposited layer is in the range of 90 nm to 900 nm. The layer growth rate in the base (2.7 pm s(-1)) and inner divertor is proportional to the exposure time when a single campaign and all three are compared. In a few cases, on mirrors located at the cassette mouth, flaking of deposits and erosion occurred

The effect of beryllium oxide on retention in JET ITER-like wall tiles

Preliminary results investigating the microstructure, bonding and effect of beryllium oxide formation on retention in the JET ITER-like wall beryllium tiles, are presented. The tiles have been investigated by several techniques: Scanning Electron Microscopy (SEM) equipped with Energy Dispersive X-ray (EDX), Transmission Electron microscopy (TEM) equipped with EDX and Electron Energy Loss Spectroscopy (EELS), Raman Spectroscopy and Thermal Desorption Spectroscopy (TDS). This paper focuses on results from melted materials of the dump plate tiles in JET. From our results and the literature, it is concluded, beryllium can form micron deep oxide islands contrary to the nanometric oxides predicted under vacuum conditions. The deepest oxides analyzed were up to 2-micron thicknesses. The beryllium Deuteroxide (BeOxDy) bond was found with Raman Spectroscopy. Application of EELS confirmed the oxide presence and stoichiometry. Literature suggests these oxides form at temperatures greater than 700 °C where self-diffusion of beryllium ions through the surface oxide layer can occur. Further oxidation is made possible between oxygen plasma impurities and the beryllium ions now present at the wall surface. Under Ultra High Vacuum (UHV) nanometric Beryllium oxide layers are formed and passivate at room temperature. After continual cyclic heating (to the point of melt formation) in the presence of oxygen impurities from the plasma, oxide growth to the levels seen experimentally (approximately two microns) is proposed. This retention mechanism is not considered to contribute dramatically to overall retention in JET, due to low levels of melt formation. However, this mechanism, thought the result of operation environment and melt formation, could be of wider concern to ITER, dependent on wall temperatures

Modelling of tungsten erosion and deposition in the divertor of JET-ILW in comparison to experimental findings

The erosion, transport and deposition of tungsten in the outer divertor of JET-ILW has been studied for an HMode discharge with low frequency ELMs. For this specific case with an inter-ELM electron temperature at the strike point of about 20 eV, tungsten sputtering between ELMs is almost exclusively due to beryllium impurity and self-sputtering. However, during ELMs tungsten sputtering due to deuterium becomes important and even dominates. The amount of simulated local deposition of tungsten relative to the amount of sputtered tungsten in between ELMs is very high and reaches values of 99% for an electron density of 5E13 cm$^{-3}$ at the strike point and electron temperatures between 10 and 30 eV. Smaller deposition values are simulated with reduced electron density. The direction of the B-field significantly influences the local deposition and leads to a reduction if the E×B drift directs towards the scrape-off-layer. Also, the thermal force can reduce the tungsten deposition, however, an ion temperature gradient of about 0.1 eV/mm or larger is needed for a significant effect. The tungsten deposition simulated during ELMs reaches values of about 98% assuming ELM parameters according to free-streaming model. The measured WI emission profiles in between and within ELMs have been reproduced by the simulation. The contribution to the overall net tungsten erosion during ELMs is about 5 times larger than the one in between ELMs for the studied case. However, this is due to the rather low electron temperature in between ELMs, which leads to deuterium impact energies below the sputtering threshold for tungsten