556 research outputs found
On the heating of source of the Orion KL hot core
We present images of the J=10-9 rotational lines of HC3N in the vibrationally
excited levels 1v7, 1v6 and 1v5 of the hot core (HC) in Orion KL. The images
show that the spatial distribution and the size emission from the 1v7 and 1v5
levels are different. While the J=10-9 1v7 line has a size of 4''x 6'' and
peaks 1.1'' NE of the 3 mm continuum peak, the J=10--9 1v5 line emission is
unresolved (<3'') and peaks 1.3'' south of the 3 mm peak. This is a clear
indication that the HC is composed of condensations with very different
temperatures (170 K for the 1v7 peak and K for the 1v5 peak). The
temperature derived from the 1v7 and 1v5 lines increases with the projected
distance to the suspected main heating source I. Projection effects along the
line of sight could explain the temperature gradient as produced by source I.
However, the large luminosity required for source I, >5 10^5 Lsolar, to explain
the 1v5 line suggests that external heating by this source may not dominate the
heating of the HC. Simple model calculations of the vibrationally excited
emission indicate that the HC can be internally heated by a source with a
luminosity of 10^5 Lsolar, located 1.2'' SW of the 1v5 line peak (1.8'' south
of source I). We also report the first detection of high-velocity gas from
vibrationally excited HC3N emission. Based on excitation arguments we conclude
that the main heating source is also driving the molecular outflow. We
speculate that all the data presented in this letter and the IR images are
consistent with a young massive protostar embedded in an edge-on disk.Comment: 13 pages, 3 figures, To be published in Ap.J. Letter
CS Lines Profiles in Hot Cores
We present a theoretical study of CS line profiles in archetypal hot cores.
We provide estimates of line fluxes from the CS(1-0) to the CS(15-14)
transitions and present the temporal variation of these fluxes. We find that
\textit{i)} the CS(1-0) transition is a better tracer of the Envelope of the
hot core whereas the higher-J CS lines trace the ultra-compact core;
\textit{ii)} the peak temperature of the CS transitions is a good indicator of
the temperature inside the hot core; \textit{iii)} in the Envelope, the older
the hot core the stronger the self-absorption of CS; \textit{iv)} the
fractional abundance of CS is highest in the innermost parts of the
ultra-compact core, confirming the CS molecule as one of the best tracers of
very dense gas.Comment: 17 pages, 5 figures, 1 table, In press in Ap
Orion KL: The hot core that is not a "Hot Core"
We present sensitive high angular resolution submillimeter and millimeter
observations of torsionally/vibrationally highly excited lines of the CHOH,
HCN, SO, and CHCN molecules and of the continuum emission at 870
and 1300 m from the Orion KL region, made with the Submillimeter Array
(SMA). These observations plus recent SMA CO J=3-2 and J=2-1 imaging of the
explosive flow originating in this region, which is related to the
non-hierarchical disintegration of a massive young stellar system, suggest that
the molecular Orion "Hot Core" is a pre-existing density enhancement heated
from the outside by the explosive event -- unlike in other hot cores we do not
find any self-luminous submillimeter, radio or infrared source embedded in the
hot molecular gas. Indeed, we do not observe filamentary CO flow structures or
"fingers" in the shadow of the hot core pointing away from the explosion
center. The low-excitation CHCN emission shows the typical molecular
heart-shaped structure, traditionally named the Hot Core, and is centered close
to the dynamical origin of the explosion. The highest excitation CHCN lines
are all arising from the northeast lobe of the heart-shaped structure, {\it i.
e.} from the densest and most highly obscured parts of the Extended Ridge. The
torsionally excited CHOH and vibrationally excited HCN lines appear to
form a shell around the strongest submillimeter continuum source. Surprisingly
the kinematics of the Hot Core and Compact Ridge regions as traced by CHCN
and HCN also reveal filament-like structures that emerge from the dynamical
origin. All of these observations suggest the southeast and southwest sectors
of the explosive flow to have impinged on a pre-existing very dense part of the
Extended Ridge, thus creating the bright Orion KL Hot Core.Comment: Submitted to A&
Produtividade e valor nutritivo do capim-elefante cv. Napier sob doses crescentes de nitrogênio e potássio
On conditional skewness with applications to environmental data
The statistical literature contains many univariate and multivariate skewness measures that allow two datasets to be compared, some of which are defined in terms of quantile values. In most situations, the comparison between two random vectors focuses on univariate comparisons of conditional random variables truncated in quantiles; this kind of comparison is of particular interest in the environmental sciences. In this work, we describe a new approach to comparing skewness in terms of the univariate convex transform ordering proposed by van Zwet (Convex transformations of random variables. Mathematical Centre Tracts, Amsterdam, 1964), associated with skewness as well as concentration. The key to these comparisons is the underlying dependence structure of the random vectors. Below we describe graphical tools and use several examples to illustrate these comparisons.The research of Félix Belzunce, Julio Mulero and José María Ruíz is partially funded by the Ministerio de Economía y Competitividad (Spain) under Grant MTM2012-34023-FEDER. Alfonso Suárez-Llorens acknowledges support received from the Ministerio de Economía y Competitividad (Spain) under Grant MTM2014-57559-P
Perspectives on utilization of edible coatings and nano-laminate coatings for extension of postharvest storage of fruits and vegetables
It is known that in developing countries, a large quantity of fruit and vegetable losses results at postharvest and processing stages due to poor or scarce storage technology and mishandling during harvest. The use of new and innovative technologies for reducing postharvest losses is a requirement that has not been fully covered. The use of edible coatings (mainly based on biopolymers) as a postharvest technique for agricultural commodities has offered biodegradable alternatives in order to solve problems (e.g., microbiological growth) during produce storage. However, biopolymer-based coatings can present some disadvantages such as: poor mechanical properties (e.g., lipids) or poor water vapor barrier properties (e.g., polysaccharides), thus requiring the development of new alternatives to solve these drawbacks. Recently, nanotechnology has emerged as a promising tool in the food processing industry, providing new insights about postharvest technologies on produce storage. Nanotechnological approaches can contribute through the design of functional packing materials with lower amounts of bioactive ingredients, better gas and mechanical properties and with reduced impact on the sensorial qualities of the fruits and vegetables. This work reviews some of the main factors involved in postharvest losses and new technologies for extension of postharvest storage of fruits and vegetables, focused on perspective uses of edible coatings and nano-laminate coatings.María L. Flores-López thanks Mexican Science and Technology Council (CONACYT, Mexico) for PhD fellowship support (CONACYT Grant Number: 215499/310847). Miguel A. Cerqueira (SFRH/BPD/72753/2010) is recipient of a fellowship from the Fundação para a Ciência e Tecnologia (FCT, POPH-QREN and FSE Portugal). The authors also thank the FCT Strategic Project of UID/ BIO/04469/2013 unit, the project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and the project ‘‘BioInd Biotechnology and Bioengineering for improved Industrial and AgroFood processes,’’ REF. NORTE-07-0124-FEDER-000028 Co-funded by the Programa Operacional Regional do Norte (ON.2 – O Novo Norte), QREN, FEDER. Fundação Cearense de Apoio ao Desenvolvimento Científico e Tecnológico – FUNCAP, CE Brazil (CI10080-00055.01.00/13)
Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET
Effect of ELMs on fuel retention at the bulk W target of JET ITER-Like Wall was studied with multi-scale calculations. Plasma input parameters were taken from ELMy H-mode plasma experiment. The energetic intra-ELM fuel particles get implanted and create near-surface defects up to depths of few tens of nm, which act as the main fuel trapping sites during ELMs. Clustering of implantation-induced vacancies were found to take place. The incoming flux of inter-ELM plasma particles increases the different filling levels of trapped fuel in defects. The temperature increase of the W target during the pulse increases the fuel detrapping rate. The inter-ELM fuel particle flux refills the partially emptied trapping sites and fills new sites. This leads to a competing effect on the retention and release rates of the implanted particles. At high temperatures the main retention appeared in larger vacancy clusters due to increased clustering rate
Modelling of tungsten erosion and deposition in the divertor of JET-ILW in comparison to experimental findings
The erosion, transport and deposition of tungsten in the outer divertor of JET-ILW has been studied for an HMode discharge with low frequency ELMs. For this specific case with an inter-ELM electron temperature at the strike point of about 20 eV, tungsten sputtering between ELMs is almost exclusively due to beryllium impurity and self-sputtering. However, during ELMs tungsten sputtering due to deuterium becomes important and even dominates. The amount of simulated local deposition of tungsten relative to the amount of sputtered tungsten in between ELMs is very high and reaches values of 99% for an electron density of 5E13 cm at the strike point and electron temperatures between 10 and 30 eV. Smaller deposition values are simulated with reduced electron density. The direction of the B-field significantly influences the local deposition and leads to a reduction if the E×B drift directs towards the scrape-off-layer. Also, the thermal force can reduce the tungsten deposition, however, an ion temperature gradient of about 0.1 eV/mm or larger is needed for a significant effect. The tungsten deposition simulated during ELMs reaches values of about 98% assuming ELM parameters according to free-streaming model. The measured WI emission profiles in between and within ELMs have been reproduced by the simulation. The contribution to the overall net tungsten erosion during ELMs is about 5 times larger than the one in between ELMs for the studied case. However, this is due to the rather low electron temperature in between ELMs, which leads to deuterium impact energies below the sputtering threshold for tungsten
Tritium distributions on W-coated divertor tiles used in the third JET ITER-like wall campaign
Tritium (T) distributions on tungsten (W)-coated plasma-facing tiles used in the third ITER-like wall campaign (2015–2016) of the Joint European Torus (JET) were examined by means of an imaging plate technique and β-ray induced x-ray spectrometry, and they were compared with the distributions after the second (2013–2014) campaign. Strong enrichment of T in beryllium (Be) deposition layers was observed after the second campaign. In contrast, T distributions after the third campaign was more uniform though Be deposition layers were visually recognized. The one of the possible explanations is enhanced desorption of T from Be deposition layers due to higher tile temperatures caused by higher energy input in the third campaign
- …