A normal stress subgrid-scale eddy viscosity model in large eddy simulation

The Smagorinsky subgrid-scale eddy viscosity model (SGS-EVM) is commonly used in large eddy simulations (LES) to represent the effects of the unresolved scales on the resolved scales. This model is known to be limited because its constant must be optimized in different flows, and it must be modified with a damping function to account for near-wall effects. The recent dynamic model is designed to overcome these limitations but is compositionally intensive as compared to the traditional SGS-EVM. In a recent study using direct numerical simulation data, Horiuti has shown that these drawbacks are due mainly to the use of an improper velocity scale in the SGS-EVM. He also proposed the use of the subgrid-scale normal stress as a new velocity scale that was inspired by a high-order anisotropic representation model. The testing of Horiuti, however, was conducted using DNS data from a low Reynolds number channel flow simulation. It was felt that further testing at higher Reynolds numbers and also using different flows (other than wall-bounded shear flows) were necessary steps needed to establish the validity of the new model. This is the primary motivation of the present study. The objective is to test the new model using DNS databases of high Reynolds number channel and fully developed turbulent mixing layer flows. The use of both channel (wall-bounded) and mixing layer flows is important for the development of accurate LES models because these two flows encompass many characteristic features of complex turbulent flows

A priori study of subgrid-scale features in turbulent Rayleigh-Bénard convection

At the crossroad between flow topology analysis and turbulence modeling, a priori studies are a reliable tool to understand the underlying physics of the subgrid-scale (SGS) motions in turbulent flows. In this paper, properties of the SGS features in the framework of a large-eddy simulation are studied for a turbulent Rayleigh-Bénard convection (RBC). To do so, data from direct numerical simulation (DNS) of a turbulent air-filled RBC in a rectangular cavity of aspect ratio unity and p spanwise open-ended distance are used at two Rayleigh numbers Ra € (108, 1010) [Dabbagh et al.,Peer ReviewedPostprint (author's final draft

Leray and LANS-α\alpha modeling of turbulent mixing

Mathematical regularisation of the nonlinear terms in the Navier-Stokes equations provides a systematic approach to deriving subgrid closures for numerical simulations of turbulent flow. By construction, these subgrid closures imply existence and uniqueness of strong solutions to the corresponding modelled system of equations. We will consider the large eddy interpretation of two such mathematical regularisation principles, i.e., Leray and LANS$-\alpha$ regularisation. The Leray principle introduces a {\bfi smoothed transport velocity} as part of the regularised convective nonlinearity. The LANS$-\alpha$ principle extends the Leray formulation in a natural way in which a {\bfi filtered Kelvin circulation theorem}, incorporating the smoothed transport velocity, is explicitly satisfied. These regularisation principles give rise to implied subgrid closures which will be applied in large eddy simulation of turbulent mixing. Comparison with filtered direct numerical simulation data, and with predictions obtained from popular dynamic eddy-viscosity modelling, shows that these mathematical regularisation models are considerably more accurate, at a lower computational cost.Comment: 42 pages, 12 figure

Fetal exposure to bisphenol A as a risk factor for the development of childhood asthma: an animal model study

<p>Abstract</p> <p>Background</p> <p>The prevalence of asthma in industrialized countries has been increasing dramatically and asthma is now the most common chronic disease of children in the United States. The rapidity of the increase strongly suggests that changes in environmental exposures are the likely cause of this epidemic. Further, the early onset of allergic manifestations suggests that these exposures may act on the prenatal development of the immune system. We have focused on the potential effects of bisphenol A (BPA), a chemical pollutant with one of the largest productions, on the development of childhood asthma. We have reported that perinatal BPA exposure promotes the development of allergic asthma in a mouse model. The current study was designed to identify a critical period of BPA exposure and to begin elucidating the mechanisms for this susceptibility.</p> <p>Methods</p> <p>Female BALB/c mice received 10 micro g/ml BPA in their drinking water from one week before pregnancy until the end of the study. Some of the pups were transferred in the first 48 h of life from their BPA-loaded mother to an unexposed mother, or vice versa. Half of the pups were sensitized with a low dose of the experimental allergen ovalbumin (OVA), the rest received PBS as an unsensitized controls. On day 22, the pups were challenged by inhalations of ovalbumin or PBS followed by quantification of eosinophils in and hyperreactivity of their airways, major indicators of experimental asthma in this classical mouse model. Hepatic expression of two isoforms of UDP-glucuronosyltransferase (Ugt) was quantified by quantitative RT-PCR at various ages.</p> <p>Results</p> <p>Pups exposed to BPA in utero and through breast milk, or in utero only, displayed an asthma phenotype in response to their "suboptimal" allergic sensitization, whereas, pups only exposed to BPA postnatally from breast milk, did not. The expression of Ugt2b1, an isoform related to BPA clearance in rats, was not detectable in mouse fetuses and newborn pups, but increased by day 5 and approached adult levels by day 25.</p> <p>Conclusions</p> <p>Prenatal exposures that produce environmentally relevant burdens of BPA, followed by postnatal allergic sensitization and challenges, promote the development of experimental allergic asthma. Delayed expression of BPA-metabolizing enzymes may explain, at least in part, the enhanced fetal susceptibility to this common environmental contaminant.</p

Kinetic study of the selective hydrogenation of styrene over a Pd egg-shell composite catalyst

This is a study on the kinetics of the liquid-phase hydrogenation of styrene to ethylbenzene over a catalyst of palladium supported on an inorganic–organic composite. This support has a better mechanical resistance than other commercial supports, e.g. alumina, and yields catalysts with egg-shell structure and a very thin active Pd layer. Catalytic tests were carried out in a batch reactor by varying temperature, total pressure and styrene initial concentration between 353–393 K, 10–30 bar, and 0.26–0.60 mol L−1. Kinetic models were developed on the assumptions of dissociative hydrogen chemisorption and non-negligible adsorption of hydrogen and styrene. Final chemical reaction expressions useful for reactor design were obtained. The models that best fitted the experimental data were those ones that considered the surface reaction as the limiting step. In this sense, a two-step Horiuti–Polanyi working mechanism with half hydrogenation intermediates gave the best fit of the experimental data. The heats of adsorption of styrene and ethylbenzene were also estimated.The authors are gratefully indebted to CONICET, ANPCyT and Universidad Nacional del Litoral for financially sponsoring this research work

Interactions between Connected Half-Sarcomeres Produce Emergent Mechanical Behavior in a Mathematical Model of Muscle

Most reductionist theories of muscle attribute a fiber's mechanical properties to the scaled behavior of a single half-sarcomere. Mathematical models of this type can explain many of the known mechanical properties of muscle but have to incorporate a passive mechanical component that becomes ∼300% stiffer in activating conditions to reproduce the force response elicited by stretching a fast mammalian muscle fiber. The available experimental data suggests that titin filaments, which are the mostly likely source of the passive component, become at most ∼30% stiffer in saturating Ca2+ solutions. The work described in this manuscript used computer modeling to test an alternative systems theory that attributes the stretch response of a mammalian fiber to the composite behavior of a collection of half-sarcomeres. The principal finding was that the stretch response of a chemically permeabilized rabbit psoas fiber could be reproduced with a framework consisting of 300 half-sarcomeres arranged in 6 parallel myofibrils without requiring titin filaments to stiffen in activating solutions. Ablation of inter-myofibrillar links in the computer simulations lowered isometric force values and lowered energy absorption during a stretch. This computed behavior mimics effects previously observed in experiments using muscles from desmin-deficient mice in which the connections between Z-disks in adjacent myofibrils are presumably compromised. The current simulations suggest that muscle fibers exhibit emergent properties that reflect interactions between half-sarcomeres and are not properties of a single half-sarcomere in isolation. It is therefore likely that full quantitative understanding of a fiber's mechanical properties requires detailed analysis of a complete fiber system and cannot be achieved by focusing solely on the properties of a single half-sarcomere

Flow resistance in natural, turbulent channel flows: The need for a fluvial fluid mechanics

In fluvial environments, feedbacks among flow, bed forms, sediment, and macrophytes result in a complex fluid dynamics. The assumptions underpinning standard tools in hydraulics are commonly violated and alternative approaches must be formulated. I argue that we should question the assumption that classical notions in fluid mechanics provide the foundations for the techniques of the future. Recent work on turbulent dissipation, interscale modulation of the dynamics, intermittency, and the role of complex forcings is discussed. An agenda for future work is proposed that involves improving our characterization of complex forcings and developing better understanding of the behavior of the velocity gradient tensor in complex, fluvial environments. This leads to the formulation of modeling tools relevant to fluvial fluid mechanics, rather than a reliance on methods developed elsewhere. One avenue by which such methods might be developed is suggested based on the stretched spiral vortex as a baseline topology. This would result in a nonequilibrium model for turbulence that has greater potential to capture the dynamics in which we are interested. Although these ideas are raised in the context of a future fluvial fluid mechanics, they are applicable to any situation where turbulent flows are forced in complicated ways