338 research outputs found

    Nitrogen dynamics in the shallow groundwater of a riparian wetland zone of the Garonne, SW France: nitrate inputs, bacterial densities, organic matter supply and denitrification measurements

    Get PDF
    This study highlights the role of interactions between surface and sub-surface water of the riparian zone of a large river (the Garonne, SW France). Information is given about the role of surface water in supplying Dissolved Organic Carbon (DOC ) to the riparian zone for nitrate removal processes. The densities of bacteria (up to 3.3106 cell m L-1) in groundwater are strongly conditioned by the water moving during flood events. Total bacterial densities in groundwater were related to surface water bacterial densities. In sediment, total bacteria are attached mainly to fine particles (90 % in the fraction < 1 mm). Spatial variations in organic carbon and nitrate content in groundwater at the site studied are correlated with exchanges between the groundwater and the river, from the upstream to the downstream part of the meander. Total bacterial densities, nitrate and decressing organic carbon concentrations follow the same pattern. These results suggest that, in this kind of riparian wetland, nitrate from alluvial groundwater influenced by agricultural practices may be denitrified by bacteria in the presence of organic carbon from river surface water

    Is the second harmonic method applicable for thin films mechanical properties characterization by nanoindentation? Is the second harmonic method applicable for thin films mechanical properties characterization by nanoindentation?

    Full text link
    The second harmonic method is a dynamic indentation technique independent of the direct indentation depth measurement. It can be used to determine near-surface mechanical properties of bulk materials more precisely than classical dynamic nano-indentation. In this paper, the second harmonic method is extended to the measurement of the mechanical properties of thin PMMA layers deposited onto silicon wafers. It is shown that this new technique gives precise results at small depths (less than 100nm), even for films with a thickness lower than 500nm, which was not possible to achieve with the classical CSM method. However, experimental and numerical results obtained both with classical nanoindentation and second harmonic methods differ at high indentation depth. Using FE simulations and AFM measurements, it is shown that the contact depth calculation with classical models can explain this difference

    Management of natural resources through automatic cartographic inventory

    Get PDF
    The author has identified the following significant results. Significant results of the ARNICA program (February - December 1973) were: (1) The quantitative processing of ERTS-1 data was developed along two lines: the study of geological structures and lineaments of Spanish Catalonia, and the phytogeographical study of the forest region of the Landes of Gascony (France). In both cases it is shown that the ERTS-1 imagery can be used in establishing zonings of equal quantitative interpretation value. (2) In keeping with the operational transfer program proposed in previous reports between exploration of the imagery and charting of the object, a precise data processing method was developed, concerning more particularly the selection of digital equidensity samples computer display and rigorous referencing

    Ion pump activity generates fluctuating electrostatic forces in biomembranes

    Full text link
    We study the non-equilibrium dynamics of lipid membranes with proteins that actively pump ions across the membrane. We find that the activity leads to a fluctuating force distribution due to electrostatic interactions arising from variation in dielectric constant across the membrane. By applying a multipole expansion we find effects on both the tension and bending rigidity dominated parts of the membranes fluctuation spectrum. We discuss how our model compares with previous studies of force-multipole models.Comment: 6 pages, 2 figures, to appear in EP

    SURFATM-NH3: a model combining the surface energy balance and bi-directional exchanges of ammonia applied at the field scale

    Get PDF
    A new biophysical model SURFATM-NH3, simulating the ammonia (NH&lt;sub&gt;3&lt;/sub&gt;) exchange between terrestrial ecosystems and the atmosphere is presented. SURFATM-NH3 consists of two coupled models: (i) an energy budget model and (ii) a pollutant exchange model, which distinguish the soil and plant exchange processes. The model describes the exchanges in terms of adsorption to leaf cuticles and bi-directional transport through leaf stomata and soil. The results of the model are compared with the flux measurements over grassland during the GRAMINAE Integrated Experiment at Braunschweig, Germany. The dataset of GRAMINAE allows the model to be tested in various meteorological and agronomic conditions: prior to cutting, after cutting and then after the application of mineral fertilizer. The whole comparison shows close agreement between model and measurements for energy budget and ammonia fluxes. The major controls on the ground and plant emission potential are the physicochemical parameters for liquid-gas exchanges which are integrated in the compensation points for live leaves, litter and the soil surface. Modelled fluxes are highly sensitive to soil and plant surface temperatures, highlighting the importance of accurate estimates of these terms. The model suggests that the net flux depends not only on the foliar (stomatal) compensation point but also that of leaf litter. SURFATM-NH3 represents a comprehensive approach to studying pollutant exchanges and its link with plant and soil functioning. It also provides a simplified generalised approach (SVAT model) applicable for atmospheric transport models

    Nouvelles séquences binaires et quaternaires pour l'étalement de spectre par séquence directe obtenues via les méthodes de Recuit Simulé et de Recherche Taboue

    Get PDF
    Cet article présente l'application de méthodes combinatoires à l'optimisation de séquences pseudo-aléatoires pour l'étalement de spectre par séquence directe. Cette approche permet pour la première fois la prise en compte des corrélations impaires. Les familles de séquences obtenues, dans les cas binaire et quaternaire, sont comparées à celles de la littérature

    Direct sequence spread spectrum sequences

    Get PDF
    DS-CDMA (for Direct-Sequence Code-Division Multiple-Access, in english, or AMRC, for Accès Multiple à Répartition par les Codes, in french) receivers are significantly performance degraded by the non-orthogonality of the classicaly used spreading sequences, mainly because of the odd correlation functions . The "Tabu Search" algorithm enables sequence generation optimising various criteria . The obtained performance are better than those of the Litterature . Moreover, the proposed method enables the optimisation of sequence sets of any desired length and cardinal, what is not the case for the previous mathematically constructed sequences .Les récepteurs DS-CDMA (pour Direct-Sequence Code-Division Multiple-Access, en anglais, ou AMRC, pour Accès Multiple à Répartition par les Codes, en français) voient leur performance être dégradée de manière significative par la non-orthogonalité des séquences d'étalement classiquement utilisées et principalement à cause des fonctions de corrélation impaires. L'algorithme dit de « Recherche Taboue » (ou Tabu Search, en anglais) permet la génération de séquences optimisant différents critères. Les performances obtenues sont meilleures que celles des séquences de la littérature. De plus, la démarche exposée permet d'optimiser des jeux de séquences de longueur et de cardinal quelconques, ce qui n'est pas le cas des séquences construites de manière mathématique

    Temporal variability in bioassays of the stomatal ammonia compensation point in relation to plant and soil nitrogen parameters in intensively managed grassland

    Get PDF
    The exchange of ammonia between crop canopies and the atmosphere depends on a range of plant parameters and climatic conditions. However, little is known about effects of management factors. We have here investigated the stomatal ammonia compensation point in response to cutting and fertilization of a grass sward dominated by Lolium perenne. Tall grass had a very low NH3 compensation point (around 1 nmol mol−1), reflecting the fact that leaf nitrogen (N) concentration was very low. During re-growth after cutting, leaf tissue concentrations of NO3-, NH4+, soluble N and total N increased along with apoplastic NH4+ concentrations. In contrast, apoplastic pH decreased resulting in largely unaltered NH3 compensation points. Nitrogen fertilization one week after cutting caused the apoplastic NH4+ concentration of the newly emerging leaves to increase dramatically. The NH3 compensation point peaked between 15 and 25 nmol mol−1 the day after the fertiliser was applied and thereafter decreased over the following 10 days until reaching the same level as before fertilisation. Ammonium concentrations in leaf apoplast, bulk tissue and litter were positively correlated (P=0.001) throughout the experimental period. Bulk tissue NH4+ concentrations, total plant N and soil NH4+ concentrations also showed a positive correlation. A very high potential for NH3 emission was shown by the plant litter

    Concentrations and fluxes of isoprene and oxygenated VOCs at a French Mediterranean oak forest

    Get PDF
    The CANOPEE project aims to better understand the biosphere–atmosphere exchanges of biogenic volatile organic compounds (BVOCs) in the case of Mediterranean ecosystems and the impact of in-canopy processes on the atmospheric chemical composition above the canopy. Based on an intensive field campaign, the objective of our work was to determine the chemical composition of the air inside a canopy as well as the net fluxes of reactive species between the canopy and the boundary layer. Measurements were carried out during spring 2012 at the field site of the Oak Observatory of the Observatoire de Haute Provence (O3HP) located in the southeast of France. The site is a forest ecosystem dominated by downy oak, Quercus pubescens Willd., a typical Mediterranean species which features large isoprene emission rates. Mixing ratios of isoprene, its degradation products methylvinylketone (MVK) and methacrolein (MACR) and several other oxygenated VOC (OxVOC) were measured above the canopy using an online proton transfer reaction mass spectrometer (PTR-MS), and fluxes were calculated by the disjunct eddy covariance approach. The O3HP site was found to be a very significant source of isoprene emissions, with daily maximum ambient concentrations ranging between 2–16 ppbv inside and 2–5 ppbv just above the top of the forest canopy. Significant isoprene fluxes were observed only during daytime, following diurnal cycles with midday net emission fluxes from the canopy ranging between 2.0 and 9.7 mg m−2 h1. Net isoprene normalized flux (at 30 °C, 1000 μmol quanta m−2 s−1) was estimated at 7.4 mg m−2 h−1. Evidence of direct emission of methanol was also found exhibiting maximum daytime fluxes ranging between 0.2 and 0.6 mg m−2 h−1, whereas flux values for monoterpenes and others OxVOC such as acetone and acetaldehyde were below the detection limit. The MVK+MACR-to-isoprene ratio provided useful information on the oxidation of isoprene, and is in agreement with recent findings proposing weak production yields of MVK and MACR, in remote forest regions where the NOx concentrations are low. In-canopy chemical oxidation of isoprene was found to be weak and did not seem to have a significant impact on isoprene concentrations and fluxes above the canopy

    Influence of Humidity on Microtribology of Vertically Aligned Carbon Nanotube Film

    Get PDF
    The aim of this study is to probe the influence of water vapor environment on the microtribological properties of a forestlike vertically aligned carbon nanotube (VACNT) film, deposited on a silicon (001) substrate by chemical vapor deposition. Tribological experiments were performed using a gold tip under relative humidity varying from 0 to 100%. Very low adhesion forces and high friction coefficients of 0.6 to 1.3 resulted. The adhesion and friction forces were independent of humidity, due probably to the high hydrophobicity of VACNT. These tribological characteristics were compared to those of a diamond like carbon (DLC) sample
    • …
    corecore