Simultaneous optimization of colloidal stability and interfacial charge transfer efficiency in photocatalytic Pt/CdS nanocrystals

Colloidal stability and efficient interfacial charge transfer in semiconductor nanocrystals are of great importance for photocatalytic applications in aqueous solution since they provide long-term functionality and high photocatalytic activity, respectively. However, colloidal stability and interfacial charge transfer efficiency are difficult to optimize simultaneously since the ligand layer often acts as both a shell stabilizing the nanocrystals in colloidal suspension and a barrier reducing the efficiency of interfacial charge transfer. Here, we show that, for cysteine-coated, Pt-decorated CdS nanocrystals and Na2SO3 as hole scavenger, triethanolamine (TEOA) replaces the original cysteine ligands in situ and prolongs the highly efficient and steady H2 evolution period by more than a factor of 10. It is shown that Na2SO3 is consumed during H2 generation while TEOA makes no significant contribution to the H2 generation. An apparent quantum yield of 31.5%, a turnover frequency of 0.11 H2/Pt/s, and an interfacial charge transfer rate faster than 0.3 ps were achieved in the TEOA stabilized system. The short length, branched structure and weak binding of TEOA to CdS as well as sufficient free TEOA in the solution are the keys to enhancing colloidal stability and maintaining efficient interfacial charge transfer at the same time. Additionally, TEOA is commercially available and cheap, and we anticipate that this approach can be widely applied in many photocatalytic applications involving colloidal nanocrystals

Hydrogenophaga defluvii sp nov and Hydrogenophaga atypica sp nov., isolated from activated sludge

Two Gram-negative, oxidase-positive rods (strains BSB 9.5T and BSB 41.8T) isolated from wastewater were studied using a polyphasic approach. 16S rRNA gene sequence comparisons demonstrated that both strains cluster phylogenetically within the family Comamonadaceae: the two strains shared 99·9 % 16S rRNA gene sequence similarity and were most closely related to the type strains of Hydrogenophaga palleronii (98·5 %) and Hydrogenophaga taeniospiralis (98·0 %). The fatty acid patterns and substrate-utilization profiles displayed similarity to the those of the five Hydrogenophaga species with validly published names, although clear differentiating characteristics were also observed. The two strains showed DNA–DNA hybridization values of 51 % with respect to each other. No close similarities to any other Hydrogenophaga species were detected in hybridization experiments with the genomic DNAs. On the basis of these results, two novel Hydrogenophaga species, Hydrogenophaga defluvii sp. nov. and Hydrogenophaga atypica sp. nov. are proposed, with BSB 9.5T (=DSM 15341T=CIP 108119T) and BSB 41.8T (=DSM 15342T=CIP 108118T) as the respective type strains

Reduzierte Bodenbearbeitung, Zwischenfrüchte und Transfermulch für einen bodenregenerierenden Anbau

Spezialisierung, Intensivierung und Ökonomisierung erschweren Bodenstrukturverbesserung und den Pflanzenschutz im ökologischen Landbau. Um die nachhaltigen Ziele des Ökolandbaus zu erreichen muss parallel eine ökologische Intensivierung stattfinden. Durch Zwischenfrüchte, reduzierter Bodenbearbeitung und Mulch aus Gründüngern soll der Bodenzustand während des Anbaus verbessert, Erosion vermieden und der Pflanzenschutzaufwand verringert werden, für einen resilienten Anbau. In dem Workshop werden Akteure aus Praxis, Beratung und Wissenschaft ihre Erkenntnisse zum bodenschonenden Anbau zusammenfassen. In Arbeitsgruppen werden Fragen der Umsetzung, Herausforderungen und einer Vernetzung erörtert. Die abschließende Diskussion bietet Raum um offene Fragen und Wiedersprüche zu debattieren

The impact of metallic contacts on propagation losses of an underlying photonic crystal waveguide

In view of an electrically pumped photonic crystal-based semiconductor optical amplifier (SOA), we investigate optical mode propagation in 2D PhC waveguides in the presence of metal contacts for carrier injection. Our photonic crystal (PhC) devices are manufactured in the InP/InGaAsP material system. For the loss measurements, we have fabricated contact strips as narrow as 300nm with a sub-50nm placing accuracy on top of W3 waveguides. We study the influence of their position and width on optical power transmission through passive waveguides with respect to viability for future active devices. Our experimental results are complemented by numerical studies (FDTD, plane-wave expansion method)

Multiple Single-Unit Long-Term Tracking on Organotypic Hippocampal Slices Using High-Density Microelectrode Arrays

A novel system to cultivate and record from organotypic brain slices directly on high-density microelectrode arrays (HD-MEA) was developed. This system allows for continuous recording of electrical activity of specific individual neurons at high spatial resolution while monitoring at the same time, neuronal network activity. For the first time, the electrical activity patterns of single neurons and the corresponding neuronal network in an organotypic hippocampal slice culture were studied during several consecutive weeks at daily intervals. An unsupervised iterative spike-sorting algorithm, based on PCA and k-means clustering, was developed to assign the activities to the single units. Spike-triggered average extracellular waveforms of an action potential recorded across neighboring electrodes, termed ‘footprints’ of single-units were generated and tracked over weeks. The developed system offers the potential to study chronic impacts of drugs or genetic modifications on individual neurons in slice preparations over extended times

Controlling Visible Light-Driven Photoconductivity in Self-Assembled Perylene Bisimide Structures

Alanine-functionalized perylene bisimides (PBI-A) are promising photoconductive materials. PBI-A self-assembles at high concentrations (mM) into highly ordered wormlike structures that are suitable for charge transport. However, we previously reported that the photoconductive properties of dried films of PBI-A did not correlate with the electronic absorption spectra as activity was only observed under UV light. Using transient absorption spectroscopy, we now demonstrate that charge separation can occur within these PBI-A structures in water under visible light. The lack of charge separation in the films is shown by DFT calculations to be due to a large ion-pair energy in the dried samples which is due to both the low dielectric environment and the change in the site of hole-localization upon drying. However, visible light photoconductivity can be induced in dried PBI-A films through the addition of methanol vapor, a suitable electron donor. The extension of PBI-A film activity into the visible region demonstrates that this class of self-assembled PBI-A structures may be of use in a heterojunction system when coupled to a suitable electron donor

Spectral shaping of laser generated proton beams

The rapid progress in the field of laser particle acceleration has stimulated a debate about the promising perspectives of laser based ion beam sources. For a long time, the beams produced exhibited quasi-thermal spectra. Recent proof-of-principle experiments demonstrated that ion beams with narrow energy distribution can be generated from special target geometries. However, the achieved spectra were strongly limited in terms of monochromacity and reproducibility. We show that microstructured targets can be used to reliably produce protons with monoenergetic spectra above 2 MeV with less than 10% energy spread. Detailed investigations of the effects of laser ablation on the target resulted in a significant improvement of the reproducibility. Based on statistical analysis, we derive a scaling law between proton peak position and laser energy, underlining the suitability of this method for future applications. Both the quality of the spectra and the scaling law are well reproduced by numerical simulations

Size distribution, mass concentration, chemical and mineralogical composition and derived optical parameters of the boundary layer aerosol at Tinfou, Morocco, during SAMUM 2006

During the SAMUM 2006 field campaign in southern Morocco, physical and chemical properties of desert aerosols were measured. Mass concentrations ranging from 30μgm−3 for PM2.5 under desert background conditions up to 300 000μgm−3 for total suspended particles (TSP) during moderate dust storms were measured. TSP dust concentrations are correlated with the local wind speed, whereasPM10 andPM2.5 concentrations are determined by advection from distant sources. Size distributions were measured for particles with diameter between 20 nm and 500μm (parametrizations are given). Two major regimes of the size spectrum can be distinguished. For particles smaller than 500 nm diameter, the distributions show maxima around 80 nm, widely unaffected of varying meteorological and dust emission conditions. For particles larger than 500 nm, the range of variation may be up to one order of magnitude and up to three orders of magnitude for particles larger than 10μm. The mineralogical composition of aerosol bulk samples was measured by X-ray powder diffraction. Major constituents of the aerosol are quartz, potassium feldspar, plagioclase, calcite, hematite and the clay minerals illite, kaolinite and chlorite. A small temporal variability of the bulk mineralogical composition was encountered. The chemical composition of approximately 74 000 particles was determined by electron microscopic single particle analysis. Three size regimes are identified: for smaller than 500 nm in diameter, the aerosol consists of sulphates and mineral dust. For larger than 500 nm up to 50μm, mineral dust dominates, consisting mainly of silicates, and—to a lesser extent—carbonates and quartz. For diameters larger than 50μm, approximately half of the particles consist of quartz. Time series of the elemental composition show a moderate temporal variability of the major compounds. Calcium-dominated particles are enhanced during advection from a prominent dust source in Northern Africa (Chott El Djerid and surroundings). The particle aspect ratio was measured for all analysed particles. Its size dependence reflects that of the chemical composition. For larger than 500 nm particle diameter, a median aspect ratio of 1.6 is measured. Towards smaller particles, it decreases to about 1.3 (parametrizations are given). From the chemical/mineralogical composition, the aerosol complex refractive index was determined for several wavelengths from ultraviolet to near-infrared. Both real and imaginary parts show lower values for particles smaller than 500 nm in diameter (1.55–2.8 × 10−3i at 530 nm) and slightly higher values for larger particles (1.57–3.7 × 10−3i at 530 nm)

Angular Momentum and Vortex Formation in Bose-Einstein-Condensed Cold Dark Matter Haloes

(Abridged) Extensions of the standard model of particle physics predict very light bosons, ranging from about 10^{-5} eV for the QCD axion to 10^{-33} eV for ultra-light particles, which could be the cold dark matter (CDM) in the Universe. If so, their phase-space density must be high enough to form a Bose-Einstein condensate (BEC). The fluid-like nature of BEC-CDM dynamics differs from that of standard collisionless CDM (sCDM), so observations of galactic haloes may distinguish them. sCDM has problems with galaxy observations on small scales, which BEC-CDM may overcome for a large range of particle mass m and self-interaction strength g. For quantum-coherence on galactic scales of radius R and mass M, either the de-Broglie wavelength lambda_deB ~ m_H \cong 10^{-25}(R/100 kpc)^{-1/2}(M/10^{12} M_solar)^{-1/2} eV, or else lambda_deB << R but self-interaction balances gravity, requiring m >> m_H and g >> g_H \cong 2 x 10^{-64} (R/100 kpc)(M/10^{12} M_solar)^{-1} eV cm^3. Here we study the largely-neglected effects of angular momentum. Spin parameters lambda \cong 0.05 are expected from tidal-torquing by large-scale structure, just as for sCDM. Since lab BECs develop quantum vortices if rotated rapidly enough, we ask if this angular momentum is sufficient to form vortices in BEC haloes, affecting their structure with potentially observable consequences. The minimum angular momentum for this, L_{QM} = $\hbar M/m$, requires m >= 9.5 m_H for lambda = 0.05, close to the particle mass required to influence structure on galactic scales. We study the equilibrium of self-gravitating, rotating BEC haloes which satisfy the Gross-Pitaevskii-Poisson equations, to calculate if and when vortices are energetically favoured. Vortices form as long as self-interaction is strong enough, which includes a large part of the range of m and g of interest for BEC-CDM haloes.Comment: Several typos and numerical typos (incl. in Fig.6, Table 2 and Table 3) have been corrected and references have been updated after proof-reading stage; MNRAS in press; 29 pages; 11 figure

Colloidal dual-band gap cell for photocatalytic hydrogen generation

We report that the internal quantum efficiency for hydrogen generation in spherical, Pt-decorated CdS nanocrystals can be tuned by quantum confinement, resulting in higher efficiencies for smaller than for larger nanocrystals (17.3% for 2.8 nm and 11.4% for 4.6 nm diameter nanocrystals). We attribute this to a larger driving force for electron and hole transfer in the smaller nanocrystals. The larger internal quantum efficiency in smaller nanocrystals enables a novel colloidal dual-band gap cell utilising differently sized nanocrystals and showing larger external quantum efficiencies than cells with only one size of nanocrystals (9.4% for 2.8 nm particles only and 14.7% for 2.8 nm and 4.6 nm nanocrystals). This represents a proof-of-principle for future colloidal tandem cell