Status of Muon Collider Research and Development and Future Plans

The status of the research on muon colliders is discussed and plans are outlined for future theoretical and experimental studies. Besides continued work on the parameters of a 3-4 and 0.5 TeV center-of-mass (CoM) energy collider, many studies are now concentrating on a machine near 0.1 TeV (CoM) that could be a factory for the s-channel production of Higgs particles. We discuss the research on the various components in such muon colliders, starting from the proton accelerator needed to generate pions from a heavy-Z target and proceeding through the phase rotation and decay ($\pi \to \mu \nu_{\mu}$) channel, muon cooling, acceleration, storage in a collider ring and the collider detector. We also present theoretical and experimental R & D plans for the next several years that should lead to a better understanding of the design and feasibility issues for all of the components. This report is an update of the progress on the R & D since the Feasibility Study of Muon Colliders presented at the Snowmass'96 Workshop [R. B. Palmer, A. Sessler and A. Tollestrup, Proceedings of the 1996 DPF/DPB Summer Study on High-Energy Physics (Stanford Linear Accelerator Center, Menlo Park, CA, 1997)].Comment: 95 pages, 75 figures. Submitted to Physical Review Special Topics, Accelerators and Beam

Janus Field Theories from Non-Linear BF Theories for Multiple M2-Branes

We integrate the nonpropagating B_{\mu} gauge field for the non-linear BF Lagrangian describing N M2-branes which includes terms with even number of the totally antisymmetric tensor M^{IJK} in arXiv:0808.2473 and for the two-types of non-linear BF Lagrangians which include terms with odd number of M^{IJK} as well in arXiv:0809:0985. For the former Lagrangian we derive directly the DBI-type Lagrangian expressed by the SU(N) dynamical A_{\mu} gauge field with a spacetime dependent coupling constant, while for the low-energy expansions of the latter Lagrangians the B_{\mu} integration is iteratively performed. The derived Janus field theory Lagrangians are compared.Comment: 16 pages, LaTex, no figure

Magnetic Domains

Recently a Nahm transform has been discovered for magnetic bags, which are conjectured to arise in the large n limit of magnetic monopoles with charge n. We interpret these ideas using string theory and present some partial proofs of this conjecture. We then extend the notion of bags and their Nahm transform to higher gauge theories and arbitrary domains. Bags in four dimensions conjecturally describe the large n limit of n self-dual strings. We show that the corresponding Basu-Harvey equation is the large n limit of an equation describing n M2-branes, and that it has a natural interpretation in loop space. We also formulate our Nahm equations using strong homotopy Lie algebras.Comment: 42 pages, minor improvements, published versio

The ALICE experiment at the CERN LHC

ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries. Its overall dimensions are 161626 m3 with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008

A numerical scheme for the pore scale simulation of crystal dissolution and precipitation in porous media

In this paper we analyze a numerical scheme for a dissolution and precipitation model in porous media. We focus here on the chemistry, which is modeled by a parabolic problem that is coupled through the boundary conditions to an ordinary differential inclusion defined on the boundary. We use a regularization approach for constructing a semi-implicit scheme that is stable and convergent. For dealing with the emerging time discrete nonlinear problems, we propose a simple fixed-point iterative procedure. The paper is concluded by numerical results

Model-based expert system for design and simulation of APS coatings

International audienceThis article aims at presenting an expert system to assist the design and the simulation of 2-D shapes of alumina-titania (i.e., Al2O3-13 wt.% TiO2) Atmospherically Plasma Sprayed (APS) coatings. Indeed, the expert system derives from a spray deposition mathematic model resulting from experiments. The varied processing parameters were the geometric and the kinematics parameters, mainly, such as: the relative speed gun-substrate, the spray distance, the spray angle, the relative positioning powder injector-spray gun trajectory, the number of passes and the powder feed rate. The variations of the geometry and some of the structural parameters were analyzed relatively to the aforementioned varied parameters. Thus, a large set of spray pattern parameters was designed. This set considers mostly the spray pattern geometry. All the relationships between the processing parameters and the spray pattern parameters were hence grouped in a spray deposition model. The second step of this work consisted in optimizing the robotic (i.e., spray gun) trajectory using a robotic code, which permits a realistic simulation of the spray gun speed and its inertia. Using this simulation software, a trajectory file was built. In the third step of the work, an expert system was developed by combining the spray deposition model with the trajectory. The tasks of the expert system are: (1) to assist the user in designing the coatings by selecting the processing parameters and (2) to simulate the coating shapes by integrating the gun trajectory