Physical Exercise Program on Fall Prevention Using Technological Interface: Pretest Study

Background: Prevention of falls among older adults has boosted the development of technological solutions, requiring testing in clinical contexts and robust studies that need prior validation of procedures and data collection tools. Objective: The objectives of our study were to test the data collection procedure, train the team, and test the usability of the FallSensing Games app by older adults in a community setting. Methods: This study was conducted as a pretest of a future pilot study. Older adults were recruited in a day care center, and several tests were applied. Physical exercise sessions were held using the interactive FallSensing Games app. Nurse training strategies was completed. Results: A total of 11 older adults participated. The mean age was 75.08 (SD 3.80) years, mostly female (10/11, 91%) and with low (3-6 years) schooling (10/11, 91%). Clinically, the results show a group of older adults with comorbidities. Cognitive evaluation of the participants through the Mini Mental State Examination showed results with an average score of 25.64 (SD 3.5). Functional capacity assessed using the Lawton Instrumental Activities of Daily Living Scale (overall score from 0-23, with lower scores reflecting worse capacity to perform activities) showed impairment in different instrumental activities of daily living (average score 14.27). The data collection tool proved to enable easy interpretation; however, its structure needed small adjustments to facilitate the data collection process. Despite the length of the questionnaire, its implementation took an average of 21 minutes. For the assessment of the prevalence of fear of falling, the need to add a question was identified. The performance of functional tests under the guidance and presence of rehabilitation nurses ensured the safety of the participants. The interactive games were well accepted by the participants, and the physical exercises allowed data collection on the functionality of the older adults, such as the number of repetitions in the tests, range of movement (angle), duration of the movements, and execution of each cycle. Concerning the training of the nurses, it was crucial that they had experience with the platform, specifically the position of the chair facing the platform, the position of the feet, the posture of participants, and the use of sensors. Conclusions: In the future pilot study, the researchers point out the need to design a study with mixed methods (quantitative and qualitative), thus enriching the study results.info:eu-repo/semantics/publishedVersio

Robocasting of Cu2+ & La3+ doped sol-gel glass scaffolds with greatly enhanced mechanical properties: compressive strength up to 14 MPa

This research details the successful fabrication of scaffolds by robocasting from high silica sol-gel glass doped with Cu2+ or La3+. The parent HSSGG composition within the system SiO2-CaO-Na2O-P2O5 [67% Si - 24% Ca - 5% Na - 4% P (mol%)] was doped with 5 wt% Cu2+ or La3+ (Cu5 and La5). The paper sheds light on the importance of copper and lanthanum in improving the mechanical properties of the 3-D printed scaffolds. 1 h wet milling was sufficient to obtain a bioglass powder ready to be used in the preparation of a 40 vol% solid loading paste suitable for printing. Moreover, Cu addition showed a small reduction in the mean particle size, while La exhibited a greater reduction, compared with the parent glass. Scaffolds with macroporosity between 300 and 500 µm were successfully printed by robocasting, and then sintered at 800 °C. A small improvement in the compressive strength (7-18%) over the parent glass accompanied the addition of La. However, a much greater improvement in the compressive strength was observed with Cu addition, up to 221% greater than the parent glass, with compressive strength values of up to ∼14 MPa. This enhancement in compressive strength, around the upper limit registered for human cancellous bones, supports the potential use of this material in biomedical applications. STATEMENT OF SIGNIFICANCE: 3D porous bioactive glass scaffolds with greatly improved compressive strength were fabricated by robocasting from a high silica sol-gel glasses doped with Cu2+ or La3+. In comparison to the parent glass, the mechanical performance of scaffolds was greatly improved by copper-doping (>220%), while a modest increase of ∼9% was registered for lanthanum-doping. Doping ions (particularly La3+) acted as glass modifiers leading to less extents of silica polymerisation. This favoured the milling of the glass powders and the obtaining of smaller mean particle sizes. Pastes with a high solid loading (40 vol%) and with suitable rheological properties for robocasting were prepared from all glass powders. Scaffolds with dimensions of 3 × 3 × 4 mm and macro-pore sizes between 300 and 500 µm were fabricated.publishe

Reverse Semi-Combustion Driven by Titanium Dioxide-Ionic Liquid Hybrid Photocatalyst

EP/L015633/1 EP/K005138/1 CAPES (158804/2017/01-and 001 FAPERGS -16/2552-0000 18/2551-0000561-4 88887.195052/2018-00 CNPq :406260/2018-4 169462/2017-0 406750/2016-5 465454/2014-3 grant agreement No 810310Unprecedented metal-free photocatalytic CO2 conversion to CO (up to 228±48 μmol g−1 h−1) was displayed by TiO2@IL hybrid photocatalysts prepared by simple impregnation of commercially available P25-titanium dioxide with imidazolium-based ionic liquids (ILs). The high activity of TiO2@IL hybrid photocatalysts was mainly associated to (i) TiO2@IL red shift compared to the pure TiO2 absorption, and thus a modification of the TiO2 surface electronic structure; (ii) TiO2 with IL bearing imidazolate anions lowered the CO2 activation energy barrier. The reaction mechanism was postulated to occur via CO2 photoreduction to formate species by the imidazole/imidazole radical redox pair, yielding CO and water.publishersversionpublishe

Could petroleum biodegradation be a joint achievement of aerobic and anaerobic microrganisms in deep sea reservoirs?

Several studies suggest that petroleum biodegradation can be achieved by either aerobic or anaerobic microorganisms, depending on oxygen input or other electron acceptors and appropriate nutrients. Evidence from in vitro experiments with samples of petroleum formation water and oils from Pampo Field indicate that petroleum biodegradation is more likely to be a joint achievement of both aerobic and anaerobic bacterial consortium, refining our previous observations of aerobic degradation. The aerobic consortium depleted, in decreasing order, hydrocarbons > hopanes > steranes > tricyclic terpanes while the anaerobic consortium depleted hydrocarbons > steranes > hopanes > tricyclic terpanes. The oxygen content of the mixed consortia was measured from time to time revealing alternating periods of microaerobicity (O2 ~0.8 mg.L-1) and of aerobicity (O2~6.0 mg.L-1). In this experiment, the petroleum biodegradation changed from time to time, alternating periods of biodegradation similar to the aerobic process and periods of biodegradation similar to the anaerobic process. The consortia showed preferences for metabolizing hydrocarbons > hopanes > steranes > tricyclic terpanes during a 90-day period, after which this trend changed and steranes were more biodegraded than hopanes. The analysis of aerobic oil degrading microbiota by the 16S rRNA gene clone library detected the presence of Bacillus, Brevibacterium, Mesorhizobium and Achromobacter, and the analysis of the anaerobic oil degrading microbiota using the same technique detected the presence of Bacillus and Acinetobacter (facultative strains). In the mixed consortia Stenotrophomonas, Brevibacterium, Bacillus, Rhizobium, Achromobacter and 5% uncultured bacteria were detected. This is certainly a new contribution to the study of reservoir biodegradation processes, combining two of the more important accepted hypotheses

Nanogrooved microdiscs for bottom-up modulation of osteogenic differentiation

Grooved topographical features have effectively modulated cell differentiation on two-dimensional substrates. To transpose patterning into a 3D environmment, nanogrooved microdiscs, "topodiscs", are produced as cell carriers for bottom-up cell-mediated assembly. While enhancing cell proliferation, topodiscs led to the formation of bone-like aggregates, even in culture medium lacking osteoinductive factors.publishe

MLL5 improves ATRA driven differentiation and promotes xenotransplant engraftment in acute promyelocytic leukemia model

Although the mixed lineage leukemia 5 (MLL5) gene has prognostic implications in acute promyelocyte leukemia (APL), the underlying mechanism remains to be elucidated. Here, we demonstrate the critical role exerted by MLL5 in APL regarding cell proliferation and resistance to drug-induced apoptosis, through mtROS regulation. Additionally, MLL5 overexpression increased the responsiveness of APL leukemic cells to all-trans retinoic acid (ATRA)-induced differentiation, via regulation of the epigenetic modifiers SETD7 and LSD1. In silico analysis indicated that APL blasts with MLL5(high) transcript levels were associated with retinoic acid binding and downstream signaling, while MLL5(low) blasts displayed decreased expression of epigenetic modifiers (such as KMT2C, PHF8 and ARID4A). Finally, APL xenograft transplants demonstrated improved engraftment of MLL5-expressing cells and increased myeloid differentiation over time. Concordantly, evaluation of engrafted blasts revealed increased responsiveness of MLL5-expressing cells to ATRA-induced granulocytic differentiation. Together, we describe the epigenetic changes triggered by the interaction of MLL5 and ATRA resulting in enhanced granulocytic differentiation

Prognostic implications of the ID1 expression in acute myeloid leukemia patients treated in a resource-constrained setting

Introduction: The aberrant expression of the inhibitor of DNA binding (ID1) gene has been frequently associated with the leukemogenesis and prognostication acute myeloid leukemia (AML), although its clinical importance has never been investigated in patients treated outside well-controlled clinical trials. Methods: Using quantitative real-time polymerase chain reaction, we investigated the role of the ID1 expression in the clinical outcomes of non-selected patients with acute myeloid leukemia treated in a real-life setting. Results: Overall, 128 patients were enrolled. Patients with high ID1 expression had a lower 3-year overall survival (OS) rate of 9%, with the 95% confidence interval (95%CI) at 3 to 20%, compared to patients with a low ID1 expression (22%, 95%CI: 11 - 34%) (p = 0.037), although these findings did not retain significance after adjustment (hazard ratio (HR): 1.5, 95%CI: 0.98 - 2.28; p = 0.057). The ID1 expression had no impact on post-induction outcomes (disease-free survival, p = 0.648; cumulative incidence of relapse, p = 0.584). Conclusions: Although we are aware thar our data are confronted with many variables that cannot be fully controlled, including drug unavailability, risk-adapted treatment, comorbidities and the time from diagnosis to treatment initiation, we are firm believers that such an initiative can provide more realistic data on understudied populations, in particular those from low- and middle-income countries.</p

Vaccines for the Leishmaniases: Proposals for a Research Agenda

The International Symposium on Leishmaniasis Vaccines, held in Olinda, Brazil, on March 9–11, 2009, congregated international experts who conduct research on vaccines against the leishmaniases. The questions that were raised during that meeting and the ensuing discussions are compiled in this report and may assist in guiding a research agenda. A group to further discussion on issues raised in this policy platform has been set up at http://groups.google.com/group/leishvaccines-l