Silicone elastomers filled with rare earth oxides

Silicones which possess, amongst others, remarkable mechanical properties, thermal stability over a wide range of temperatures and processability, and rare earth oxides(REO), known for their unique optic, magnetic and catalytic properties can be coupled into multifunctional composite materials(SREOs). In addition, the intrinsic hydrophobicity of REO and polysiloxanes makes them easily compatible without the need for surface treatments of the former. Thus, europium oxide (Eu2O3), gadolinium oxide (Gd2O3) and dysprosium oxide (Dy2O3)in amounts of 20 pph are incorporated as fillers into silicone matrices, followed by processing mixture as thin films and crosslinking at room temperature. The analysis of the obtained films reveals the changes induced by these fillers in the thermal, mechanical, dielectric and optical properties, as well as the hydrophobicity of the silicones. The luminescence properties of S-REO composites were investigated by fluorescence spectra and lifetime - resolved measurements with a multiemission peaks from blue to greenish register. The thermogravimetrical analysis indicates an increasing of thermal stability of the composites that contain REO, compared to pure silicone. As expected, the dielectric permittivity significantly increased due to nature of the fillers, while the dielectric loss values are relatively low for all samples, indicating a minimal conversion of electrical energy in the form of heat within bulk composites. The presence of rare earth oxides into the silicone matrix facilitates the motions of long-range charge carriers through the network resulting in higher values of conductivity of the composite films. The stress-strain measurements revealed the reinforcing effect of the rare earth metal oxides on a silicone matrix, leading to a significant increase of Young modulus. The known hydrophobicity of silicones is further enhanced by the presence of REO

Interpenetrating poly(urethane-urea)–polydimethylsiloxane networks designed as active elements in electromechanical transducers

A poly(urethane-urea-siloxane) was prepared in a two-step procedure involving the synthesis of a bis-isocyanate prepolymer on the basis of 4,4′-diphenylmethane diisocyanate, a polyether glycol and dimethylol propionic acid, and its extension by reacting with 1,3-bis(3-aminopropyl)tetramethyldisiloxane. The resulted polymer was used in different percentages to prepare three series of interpenetrating networks (IPNs) with polydimethylsiloxane-α,ω-diols with molecular masses, Mn, of 70000, 230000 and 370000 g mol−1. A polydimethylsiloxane–polyethyleneoxide graft copolymer was added as a compatibilizing agent. The IPN precursors were mixed in solution and processed as films. During solvent evaporation, the chemical crosslinking of the polydimethylsiloxane-α,ω-diols occurs with tetraethyl orthosilicate in the presence of dibutyltin dilaurate, while in the case of poly(urethane-urea-siloxane) only physical crosslinking by hydrogen bonds is expected to occur. The morphology and thermal transitions of the resulted networks were examined by scanning electron microscopy, differential scanning calorimetry with dynamic mechanical analysis. The mechanical and dielectric characteristics (dielectric permittivity, loss, strength) of the aged films were studied. Their responsiveness to an external stimulus in the form of an increasing electric field was assessed by electromechanical measurements and expressed as lateral strain. The results were critically analyzed with respect to each other as a correlation with their composition and compared with those obtained for three common commercially available dielectric elastomers

Preparation of electromechanically active silicone composites and some evaluations of their suitability for biomedical applications

Some films based on electromechanically active polymer composites have been prepared. Polydimethylsiloxane-α,ω-diols (PDMSs) having different molecular masses (Mv = 60 700 and Mv = 44 200) were used as matrix in which two different active fillers were incorporated: titanium dioxide in situ generated from its titanium isopropoxide precursor and silica particles functionalized with polar aminopropyl groups on surface. A reference sample based on simple crosslinked PDMS was also prepared. The composites processed as films were investigated to evaluate their ability to act as efficient electromechanical actuators for potential biomedical application. Thus, the surface morphology of interest for electrodes compliance was analysed by atomic force microscopy. Mechanical and dielectric characteristics were evaluated by tensile tests and dielectric spectroscopy, respectively. Electromechanical actuation responses were measured by interferometry. The biocompatibility of the obtained materials has been verified through tests in vitro and, for valuable films, in vivo. The experimental, clinical and anatomopathological evaluation of the in vivo tested samples did not reveal significant pathological modifications

Legal aspects in detecting counterfeit medicines

Background: With the rapid development of the pharmaceutical industry cases of counterfeit medicines are more and more frequent. This is a real crime that influences Public Health, counterfeit medicines being harmful and even fatal. Material and methods: For this study we carried out an objective analysis of the world legislative framework, with predilection for the European and national one. As landmarks served: setting the research objectives, data collection, data analysis, formulation of results and conclusions. Results: The number of counterfeiting incidents during 2011 – 2015 constituted: 2011 – 1986 crimes, 2012 – 2018 crimes, 2013 – 2193 crimes, 2014 – 2177 crimes, 2015 – 3002 crimes. So far numerous directives have been approved, laws have been adopted and measures have been taken to stop the counterfeiting of medicines (Directive 2011/62/EU of 8 September 2011, the Convention MEDICRIME, Resolution 65.19 of the World Health Assembly, Rapid Alert System, global and regional operations of Interpol). Conclusions: Counterfeiting of pharmaceuticals is a global problem that involves: institutions, law enforcement, customs, doctors, pharmacists, patients and citizens. The competent national authorities in collaboration with the associations of doctors, pharmacists and patients must lead risk awareness campaigns regarding purchasing of pharmaceutical products from illegal sources. Patients should be informed of the risks they assume by purchasing drugs from different websites. The population should know that websites that sell drugs must have links directing to the competent national authority or the website of European Medicines Agency or Medicines and Medical Devices Agency from the Republic of Moldova

Bentonite as an active natural filler for silicone leading to piezoelectric-like response material

Raw sodium bentonite (Bent) without preliminary treatments is incorporated as a filler in a silicone matrix, from 5 to 100 parts per hundred (pph), by weight, by simple mixing in solution. The mixtures are processed as films and stabilized by condensation crosslinking at room temperature. Besides being environmentally safe and non-toxic, bentonite is 30 times cheaper than polydimethylsiloxane (PDMS), so the cost price of composites can be reduced by over 40%. Studies on the effects of bentonite addition as filler on the properties of composites reveal that thermal stability is not significantly affected, while an increase in the amount of inorganic residue with an increase of Bent content is recorded. More importantly, the mechanical and dielectric properties are significantly influenced by the Bent content in the PDMS matrix. The Young's modulus increases, while the elongation decreases, indicating a stiffening of the material and a decrease in its elasticity as the Bent load increases. Most notably, the dielectric permittivity increases up to more than five times at 103 Hz by adding 100 pph Bent, while the dielectric losses remain acceptable, especially at high frequencies for all composites. Furthermore, the study of composite films through Piezoresponse Force Microscopy and piezoelectric testing system reveals an outstanding piezoelectric-like response for composites with a high Bent content. The wideangle X-ray diffraction indicates an increase of the crystalline fraction - the main factor that influences the apparent piezoelectric coefficient - with increasing the Bent loa

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

SONOCHEMICAL SYNTHESIS OF HEMATITE NANOPARTICLES

Hematite nanoparticles were prepared by a procedure consisting in sonication of μ3-oxo trinuclear iron(III) acetate of composition [Fe3O(OOCCH3)6(H2O)3]NO3∙4H2O, {Fe3O}NO3 as iron source, in strong basic conditions followed by thermal treatment at 600˚C. The formation of the hematite was confirmed by IR spectroscopy, X-ray powder diffraction and Raman spectroscopy while the shape and size of the nanoparticles and their agglomeration were evidenced and estimated on the basis of the images taken with TEM techniques

Nanomaterials Developed by Processing Iron Coordination Compounds for Biomedical Application

The iron oxides, widespread in nature, are used in numerous applications in practice due to their well-known properties. These properties can be modified by size lowering at nanoscale. Some applications, such as biomedical, require a rigorous selection of nanoparticles by size, shape, and surface functionality. In other applications, such as catalysis or magnetism, the composition (generally mixed oxides) and morphology of the nanoparticles are of high importance. The preparation of iron oxide nanoparticles (IONPs) is a complex process whose control raises a number of issues. The first challenge is finding the optimal experimental conditions, which would lead to the preparation of monodisperse nanoparticles. Another issue is the selection or setting a reproducible and clean manufacturing process without a need of complex purification. Even though at the moment several methods for preparing IONPs are known, there are still concerns in the scientific world to further improve existing methods or create new protocols. Therefore, the establishment of optimal methods for preparing IONPs with predetermined structural, dimensional, and morphological characteristics is an important task of scientists. Most of the methods reported in literature for the preparation of IONPs use proper metal salts as precursors. Recently, the use of the organometallic and coordination compounds of iron as precursors for IONPs has emerged as an alternative for a better control of these. Here, achievements reported in the literature in this direction are reviewed and critically analysed in relation to the conventional method based on iron salts

Bimodal silicone interpenetrating networks sequentially built as electroactive dielectric elastomers

Two polysiloxanes, a polydimethylsiloxane-α,ω-diol (PDMS) with Mn = 370000 g mol−1, and α,ω-bis(vinyl)polydimethylsiloxane (Vi2PDMS) with Mn = 34500 g mol−1, and appropriate crosslinking systems for each of them (tetraethyl orthosilicate–dibutyltindilaurate and α,ω-bis(trimethylsiloxy)poly(dimethylmethyl-H-siloxane)–Speier's catalyst, respectively), were mixed together in various weight ratios (1:0.1, 1:0.2, 1:0.3, 1:0.5) and cast into films. These were sequentially crosslinked by different mechanisms. A determined pre-stretch was applied to the first network after its formation followed by thermal treatment for curing the second network. Non-prestreched networks were also prepared in parallel for comparison. The aged films were characterized from the point of view of the soluble fraction content, and analysed by differential scanning calorimetry, water vapour sorption in dynamic regime, dielectric spectroscopy and tensile tests. Dielectric strength and actuation strain were measured to estimate the suitability of the samples for electromechanical applications. The results revealed that through this approach one can relatively easily obtain very simple and homogeneous materials suitable for use as dielectric elastomer transducers