Universal and tunable liquid–liquid separation by nanoparticle-embedded gating membranes based on a self-defined interfacial parameter

Superwetting porous membranes with tunable liquid repellency are highly desirable in broad domains including scientific research, chemical industry, and environmental protection. Such membranes should allow for controllable droplet bouncing or spreading, which is difficult to achieve for low surface energy organic liquids (OLs). Here we develop an interfacial physical parameter to regulate the OL wettability of nanoparticle-embedded membranes by structuring synergistic layers with reconfigurable surface energy components. Under the tunable solid-liquid interaction in the aggregation-induced process, the membranes demonstrate positive/negative liquid gating regularity for polar protic liquids, polar aprotic liquids, and nonpolar liquids. Such a membrane can be employed as self-adaptive gating for various immiscible liquid mixtures with superior separation efficiency and permeation flux, even afford successive achievement of high-performance in situ extraction-back extraction coupling. This study should provide distinctive insights into intrinsic wetting behaviors and have pioneered a rational strategy to design high-performance separation materials for diverse applications

Pathogenic Pseudorabies Virus, China, 2012

In 2012, an unprecedented large-scale outbreak of disease in pigs in China caused great economic losses to the swine industry. Isolates from pseudorabies virus epidemics in swine herds were characterized. Evidence confirmed that the pathogenic pseudorabies virus was the etiologic agent of this epidemic

Photoluminescent Carbon Dots: A Mixture of Heterogeneous Fractions

Photoluminescent carbon dots (CDs) fractions have been isolated from a gel‐like material (GM), which was synthesized using a convenient one‐step solvothermal route. In terms of purification, size exclusion chromatography (SEC) and dialysis were compared with acetone wash, which revealed the advantage of acetone wash. The pre‐purified GM with acetone wash (A‐GM) was further isolated by the reversed‐phase preparative thin layer chromatography (TLC) with acetonitrile−water mixture (7 : 3; va/vw) as the developing solvent. As a result, there were four photoluminescent bands on the TLC plate, which indicated the presence of four photoluminescent fractions. Detailed characterization measurements such as UV/Vis absorption, fluorescence emission, attenuated total reflection Fourier‐transform infrared spectroscopy, X‐ray photoelectron spectroscopy, zeta potential, dynamic light scattering, atomic force microscopy, and TEM measurements were performed on all fractions to analyze their heterogeneous optical, structural, electrical, and morphological properties. Considering the comprehensive analysis, all isolated fractions were CDs. In addition, excitation wavelength‐independent CDs were obtained with a mean size of 2.5 nm and high quantum yield (55 %). Furthermore, the study demonstrates that the excitation wavelength‐dependent photoluminescence of GM could result from the mixture of different surface states of each CD fraction rather than multiple surface states of uniform CDs nanoparticles

White-light photoluminescence and photoactivation in cadmium sulfide embedded in mesoporous silicon dioxide templates studied by confocal laser scanning microscopy

This is the author's version of a work that was accepted for publication in Journal of colloid and interface science. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Journal of colloid and interface science, [147, 1, (2013)] DOI10.1016/j.jcis.2013.06.022)SBA-15 and SBA-16 silica templates have been infiltrated with CdS by means of nanocasting using a hybrid precursor. The morphology and structure of both the SiO2@CdS nanocomposites and the silica-free CdS replicas have been characterized. The three-dimensional nanocrystalline CdS networks embedded in SBA-15 and SBA-16 silica templates exhibit broad photoluminescence (PL) spectra over the entire visible range, together with enhanced PL intensity compared to silica-free CdS replicas. These effects result from the role silica plays in passivating the surface of the CdS mesostructures. Furthermore, photoactivation is eventually observed during continuous illumination because of both structural and chemical surface odifications. Owing to this combination of properties, these materials could be appealing for solid-state lighting, where ultra-bright near-white PL emission is indispensable

Engineering surface states of carbon dots to achieve controllable luminescence for solid-luminescent composites and sensitive Be2+ detection

Luminescent carbon dots (L-CDs) with high quantum yield value (44.7%) and controllable emission wavelengths were prepared via a facile hydrothermal method. Importantly, the surface states of the materials could be engineered so that their photoluminescence was either excitation-dependent or distinctly independent. This was achieved by changing the density of amino-groups on the L-CD surface. The above materials were successfully used to prepare multicolor L-CDs/polymer composites, which exhibited blue, green, and even white luminescence. In addition, the excellent excitation-independent luminescence of L-CDs prepared at low temperature was tested for detecting various metal ions. As an example, the detection limit of toxic Be2+ ions, tested for the first time, was as low as μM

The TianQin project: current progress on science and technology (Corrigendum to vol 2020, ptaa114, 2020)

TianQin is a planned space-based gravitational wave (GW) observatory consisting of three earth orbiting satellites with an orbital radius of about $10^5~{\rm km}$. The satellites will form a equilateral triangle constellation the plane of which is nearly perpendicular to the ecliptic plane. TianQin aims to detect GWs between $10^{-4}~{\rm Hz}$ and $1~{\rm Hz}$ that can be generated by a wide variety of important astrophysical and cosmological sources, including the inspiral of Galactic ultra-compact binaries, the inspiral of stellar-mass black hole binaries, extreme mass ratio inspirals, the merger of massive black hole binaries, and possibly the energetic processes in the very early universe or exotic sources such as cosmic strings. In order to start science operations around 2035, a roadmap called the 0123 plan is being used to bring the key technologies of TianQin to maturity, supported by the construction of a series of research facilities on the ground. Two major projects of the 0123 plan are being carried out. In this process, the team has created a new generation $17~{\rm cm}$ single-body hollow corner-cube retro-reflector which has been launched with the QueQiao satellite on 21 May 2018; a new laser ranging station equipped with a $1.2~{\rm m}$ telescope has been constructed and the station has successfully ranged to all the five retro-reflectors on the Moon; and the TianQin-1 experimental satellite has been launched on 20 December 2019 and the first round result shows that the satellite has exceeded all of its mission requirements