75 research outputs found

    Polariton states bound to defects in GaAs/AlAs planar microcavities

    Get PDF
    We report on polariton states bound to defects in planar GaAs/AlAs microcavities grown by molecular beam epitaxy. The defect types relevant for the spatial polariton dynamics in these structures are cross-hatch misfit dislocations, and point-like defects extended over several micrometers. We attribute the latter defects to Ga droplets emitted occasionally by the Ga cell during the growth. These defects, also known as oval defects, result in a dome-like local modulation of surface, which is translated into the cavity structure and leads to a lateral modulation of the cavity polariton energy of up to 15\,meV. The resulting spatially localized potential landscape for the in-plane polariton motion creates a series of bound states. These states were characterized by spectrally resolved transmission imaging in real and reciprocal space, and reveal the spatial potential created by the defects. Interestingly, the defect states exhibit long lifetimes in the 10ps range, which we attribute to a spatially smooth confinement potential

    Context Aware Routing Management Architecture for Airborne Networks

    Get PDF
    Military environments require highly dynamic mobile ad hoc networks (MANETs) to meet operational mission requirements. Decision makers rely on the timely delivery of critical battlefield information to make informed determinations quickly and as accurately as possible. However, traditional MANET routing protocols do not provide quality of service (QoS). Furthermore, they do not implement active controls to minimise the impact of network congestion. This study proposes the use of the information embedded in an air tasking order (ATO) during the planning phase of military missions to optimise the network performance. The trajectories of relevant nodes (airborne platforms) participating in the MANET can be forecasted by parsing key information contained in the ATO. Using this idea it is possible to optimise network routes to minimise edge overutilisation and increase network throughput. In onesimulated test case, there was a 25% improvement of network throughput, and 23% reduction on dropped packets. Using this technique, the authors can selectively preserve the QoS by establishing network controls that drop low-priority packets when necessary. The algorithm improves the overall MANET throughput while minimising the packets dropped due to network congestion

    Direct patterning of periodic semiconductor nanostructures using single-pulse nanosecond laser interference

    Get PDF
    We demonstrate an effective method for fabricating large area periodic two-dimensional semiconductor nanostructures by means of single-pulse laser interference. Utilizing a pulsed nanosecond laser with a wavelength of 355 nm, precisely ordered square arrays of nanoholes with a periodicity of 300 nm were successfully obtained on UV photoresist and also directly via a resist-free process onto semiconductor wafers. We show improved uniformity using a beam-shaping system consisting of cylindrical lenses with which we can demonstrate highly regular arrays over hundreds of square micrometers. We propose that our novel observation of direct pattern transfer to GaAs is due to local congruent evaporation and subsequent droplet etching of the surface. The results show that single-pulse interference can provide a rapid and highly efficient route for the realization of wide-area periodic nanostructures on semiconductors and potentially on other engineering materials

    Sexually dimorphic effects of prenatal alcohol exposure on the murine skeleton

    Get PDF
    Background: Prenatal alcohol exposure (PAE) can result in lifelong disabilities known as foetal alcohol spectrum disorder (FASD) and is associated with childhood growth deficiencies and increased bone fracture risk. However, the effects of PAE on the adult skeleton remain unclear and any potential sexual dimorphism is undetermined. Therefore, we utilised a murine model to examine sex differences with PAE on in vitro bone formation, and in the juvenile and adult skeleton. Methods: Pregnant C57BL/6J female mice received 5% ethanol in their drinking water during gestation. Primary calvarial osteoblasts were isolated from neonatal offspring and mineralised bone nodule formation and gene expression assessed. Skeletal phenotyping of 4- and 12-week-old male and female offspring was conducted by micro-computed tomography (µCT), 3-point bending, growth plate analyses, and histology.Results: Osteoblasts from male and female PAE mice displayed reduced bone formation, compared to control (≤30%). Vegfa, Vegfb, Bmp6, Tgfbr1, Flt1 and Ahsg were downregulated in PAE male osteoblasts only, whilst Ahsg was upregulated in PAE females. In 12-week-old mice, µCT analysis revealed a sex and exposure interaction across several trabecular bone parameters. PAE was detrimental to the trabecular compartment in male mice compared to control, yet PAE females were unaffected. Both male and female mice had significant reductions in cortical parameters with PAE. Whilst male mice were negatively affected along the tibial length, females were only distally affected. Posterior cortical porosity was increased in PAE females only. Mechanical testing revealed PAE males had significantly reduced bone stiffness compared to controls; maximum load and yield were reduced in both sexes. PAE had no effect on total body weight or tibial bone length in either sex. However, total growth plate width in male PAE mice compared to control was reduced, whilst female PAE mice were unaffected. 4-week-old mice did not display the altered skeletal phenotype with PAE observed in 12-week-old animals. Conclusions: Evidence herein suggests, for the first time, that PAE exerts divergent sex effects on the skeleton, possibly influenced by underlying sex-specific transcriptional mechanisms of osteoblasts. Establishing these sex differences will support future policies and clinical management of FASD.<br/

    GaInNAs-based Hellish-vertical cavity semiconductor optical amplifier for 1.3 μm operation

    Get PDF
    Hot electron light emission and lasing in semiconductor heterostructure (Hellish) devices are surface emitters the operation of which is based on the longitudinal injection of electrons and holes in the active region. These devices can be designed to be used as vertical cavity surface emitting laser or, as in this study, as a vertical cavity semiconductor optical amplifier (VCSOA). This study investigates the prospects for a Hellish VCSOA based on GaInNAs/GaAs material for operation in the 1.3-μm wavelength range. Hellish VCSOAs have increased functionality, and use undoped distributed Bragg reflectors; and this coupled with direct injection into the active region is expected to yield improvements in the gain and bandwidth. The design of the Hellish VCSOA is based on the transfer matrix method and the optical field distribution within the structure, where the determination of the position of quantum wells is crucial. A full assessment of Hellish VCSOAs has been performed in a device with eleven layers of Ga0.35In0.65N0.02As0.08/GaAs quantum wells (QWs) in the active region. It was characterised through I-V, L-V and by spectral photoluminescence, electroluminescence and electro-photoluminescence as a function of temperature and applied bias. Cavity resonance and gain peak curves have been calculated at different temperatures. Good agreement between experimental and theoretical results has been obtained

    Deficiency and Also Transgenic Overexpression of Timp-3 Both Lead to Compromised Bone Mass and Architecture In Vivo

    Get PDF
    Tissue inhibitor of metalloproteinases-3 (TIMP-3) regulates extracellular matrix via its inhibition of matrix metalloproteinases and membrane-bound sheddases. Timp-3 is expressed at multiple sites of extensive tissue remodelling. This extends to bone where its role, however, remains largely unresolved. In this study, we have used Micro-CT to assess bone mass and architecture, histological and histochemical evaluation to characterise the skeletal phenotype of Timp-3 KO mice and have complemented this by also examining similar indices in mice harbouring a Timp-3 transgene driven via a Col-2a-driven promoter to specifically target overexpression to chondrocytes. Our data show that Timp-3 deficiency compromises tibial bone mass and structure in both cortical and trabecular compartments, with corresponding increases in osteoclasts. Transgenic overexpression also generates defects in tibial structure predominantly in the cortical bone along the entire shaft without significant increases in osteoclasts. These alterations in cortical mass significantly compromise predicted tibial load-bearing resistance to torsion in both genotypes. Neither Timp-3 KO nor transgenic mouse growth plates are significantly affected. The impact of Timp-3 deficiency and of transgenic overexpression extends to produce modification in craniofacial bones of both endochondral and intramembranous origins. These data indicate that the levels of Timp-3 are crucial in the attainment of functionally-appropriate bone mass and architecture and that this arises from chondrogenic and osteogenic lineages

    A non-coding insertional mutation of Grhl2 causes gene over-expression and multiple structural anomalies including cleft palate, spina bifida and encephalocele

    Get PDF
    Orofacial clefts, including cleft lip and palate (CL/P), and neural tube defects (NTDs) are among the most common congenital anomalies but knowledge of the genetic basis of these conditions remains incomplete. The extent to which genetic risk factors are shared between CL/P, NTDs and related anomalies is also unclear. While identification of causative genes has largely focused on coding and loss of function mutations, it is hypothesised that regulatory mutations account for a portion of the unidentified heritability. We found that excess expression of Grainyhead-like 2 (Grhl2) not only causes spinal NTDs in Axial defects (Axd) mice, but also multiple additional defects affecting the cranial region. These include orofacial clefts comprising midline cleft lip and palate, abnormalities of the craniofacial bones and frontal and/or basal encephalocele, in which brain tissue herniates through the cranium or into the nasal cavity. To investigate the causative mutation in the Grhl2Axd strain, whole genome sequencing identified an approximately 4 kb LTR retrotransposon insertion which disrupts the non-coding regulatory region, lying approximately 300 base pairs upstream of the 5' UTR. This insertion also lies within a predicted long non-coding RNA, oriented on the reverse strand, which like Grhl2 is over-expressed in Axd (Grhl2Axd) homozygous mutant embryos. Initial analysis of the GRHL2 upstream region in individuals with NTDs or cleft palate revealed rare or novel variants in a small number of cases. We hypothesise that mutations affecting the regulation of GRHL2 may contribute to craniofacial anomalies and NTDs in humans

    Direct patterning of periodic semiconductor nanostructures using single-pulse nanosecond laser interference

    Get PDF
    We demonstrate an effective method for fabricating large area periodic two-dimensional semiconductor nanostructures by means of single-pulse laser interference. Utilizing a pulsed nanosecond laser with a wavelength of 355 nm, precisely ordered square arrays of nanoholes with a periodicity of 300 nm were successfully obtained on UV photoresist and also directly via a resist-free process onto semiconductor wafers. We show improved uniformity using a beam-shaping system consisting of cylindrical lenses with which we can demonstrate highly regular arrays over hundreds of square micrometers. We propose that our novel observation of direct pattern transfer to GaAs is due to local congruent evaporation and subsequent droplet etching of the surface. The results show that single-pulse interference can provide a rapid and highly efficient route for the realization of wide-area periodic nanostructures on semiconductors and potentially on other engineering materials

    Bimodal crystallization at polymer-fullerene interfaces

    Get PDF
    The growth-kinetics of [6,6]-phenyl C61-butyric acid methyl ester (PCBM) crystals, on two different length-scales, is shown to be controlled by the thickness of the polymer layer within a PCBM-polymer bilayer. Using a model amorphous polymer we present evidence, from in situ optical microscopy and grazing-incidence X-ray diffraction (GIXD), that an increased growth-rate of nanoscale crystals impedes the growth of micron-sized, needle-like PCBM crystals. A combination of neutron reflectivity and GIXD measurements, also allows us to observe the establishment of a liquid-liquid equilibrium composition-profile between the PCBM layer and a polymer-rich layer, before crystallization occurs. While the interfacial composition-profile is independent of polymer-film-thickness, the growth-rate of nanoscale PCBM crystals is significantly larger for thinner polymer films. A similar thickness-dependent behavior is observed for different molecular weights of entangled polymer. We suggest that the behavior may be related to enhanced local-polymer-chain-mobility in nanocomposite thin-films
    • …
    corecore