Recycled wastewater as a potential source of microplastics in irrigated soils from an arid-insular territory (Fuerteventura, Spain)

In this work, the occurrence of microplastics (MPs) in irrigation recycled wastewaters (RWWs) and a desalinated brackish water (DBW) from the arid territory of Fuerteventura (Canary Islands, Spain) was studied. Besides, the presence of MPs in two types of soils (sandy-loam and clay-loamy; with no mulch film or fertilization with sewage sludge applied) irrigated with both water qualities was addressed. Results showed the prevalence presence of cellulosic and polyester microfibers (between 84.4 and 100%) of blue and transparent colors (up to 55.6 and 33.3%, respectively), with an average length of 786.9 ± 812.1 μm in the water samples. DBW had the lowest MP concentration (2.0 ± 2.0 items·L−1) while RWW showed concentrations up to 40.0 ± 19.0 items·L−1. Similarities were also observed between the MPs types and sizes found in both soils top layer (0–5 cm), with an average concentration three times greater in soil irrigated with RWW than in soil under DBW irrigation (159 ± 338 vs. 46 ± 92 items·kg−1, respectively). In addition, no MPs were extracted from non-irrigated/non-cultivated soils, suggesting agricultural activities as the unique source of MPs in soils of this arid area. Results show that RWWs constitute a potential source of MPs in irrigated soils that should be considered among other pros and cons linked to the use of this water quality in agricultural arid land

Microplastic pollution in sublittoral coastal sediments of a North Atlantic island: The case of La Palma (Canary Islands, Spain)

In this work, the microplastic content of sediments collected in July 2020 between 5 and 7 m depth was studied in four locations of La Palma island (Canary Islands, Spain). At each sampling location, three samples were taken parallel to the shoreline. The microplastic content in each sampling corer was studied every 2.5 cm depth after digestion with a H2O2 solution followed by flotation in a saturated NaCl solution. Visualization of the final filtrates under a stereomicroscope revealed that all the sediment samples evaluated contained mostly microfibers (98.3%) which were mainly white/colorless (86.0%) and blue (9.8%), with an average length of 2423 ± 2235 (SD) mm and an average concentration of 2682 ± 827 items per kg of dry weight, being the total number of items found 1,019. Fourier Transform Infrared microscopy analysis of 13.9% (n = 139) of the microfibers also showed that they were mainly cellulosic (81.3%). No significant differences were found between the depths of the sediment. However, significant differences were found between the number of fibers from the sampling sites at the east and west of the island. Such variability could be driven by the winds and ocean mesoscale dynamics in the area. This study confirms the wide distribution of microfibers in sediments from an oceanic island like La Palma, providing their first report in marine sediments of the Canary Islands.En prensa3,20

EnviroPlaNet Project: A systematic monitoring of atmospheric deposition of microplastics in Spain

SETAC EUROPE 33RD ANNUAL MEETING 30 APRIL-4 MAY 2023 | DUBLIN, IRELANDPlastic pollution is a global concern. The world's production continues to increase yearly, reaching more than 367 million tons in 2020 [1]. Part of these plastics are directly manufactured as microplastics (MPs) while another fraction becomes MPs as a result of the degradation processes of larger plastics into microsized particles. In this context, MPs have already been found in the hydrosphere, biosphere, cryosphere, lithosphere and, recently, atmosphere. However, the presence of MPs in the atmosphere has been poorly studied. The objective of this work was the systematic monitoring of the deposition of MPs in areas of Spain with different characteristics (population, economic activities, and climate) using a common method for sampling, quantification, and identification during the four seasons of a one-year sampling campaign with the purpose of clarifying the role of the atmosphere in the fate and dispersion of MPs. This was possible thanks to the collaboration of several Spanish research groups in the project Thematic Network of Micro- and Nanoplastics in the EnvironmentPeer reviewe

Occurrence and size distribution study of microplastics in household water from different cities in continental Spain and the Canary Islands

9 pages, 5 figures, 1 table, supplementary materials https://doi.org/10.1016/j.watres.2023.120044.-- Data availability: Data will be made available on requestThe purpose of this study was to investigate the occurrence of microplastics (MPs) in drinking water in Spain by comparing tap water from different locations using common sampling and identification procedures. We sampled tap water from 24 points in 8 different locations from continental Spain and the Canary Islands by means of 25 μm opening size steel filters coupled to household connections. All particles were measured and spectroscopically characterized including not only MPs but also particles consisting of natural materials with evidence of industrial processing, such as dyed natural fibres, referred insofar as artificial particles (APs). The average concentration of MPs was 12.5 ± 4.9 MPs/m3 and that of anthropogenic particles 32.2 ± 12.5 APs/m3. The main synthetic polymers detected were polyamide, polyester, and polypropylene, with lower counts of other polymers including the biopolymer poly(lactic acid). Particle size and mass distributions were parameterized by means of power law distributions, which allowed performing estimations of the concentration of smaller particles provided the same scaling parameter of the power law applies. The calculated total mass concentration of the identified MPs was 45.5 ng/L. The observed size distribution of MPs allowed an estimation for the concentration of nanoplastics (< 1 µm) well below the ng/L range; higher concentrations are not consistent with scale invariant fractal fragmentation. Our findings showed that MPs in the drinking water sampled in this work do not represent a significant way of exposure to MPs and would probably pose a negligible risk for human healthThe authors acknowledge the financial support provided by Plastics Europe and that of the Spanish Government, Ministerio de Ciencia e Innovación, grants PID2020-113769RB-C21/C22.With the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S)Peer reviewe

A nationwide monitoring of atmospheric microplastic deposition

8 Pág.Plastic production continues to increase every year, yet it is widely acknowledged that a significant portion of this material ends up in ecosystems as microplastics (MPs). Among all the environmental compartments affected by MPs, the atmosphere remains the least well-known. Here, we conducted a one-year simultaneous monitoring of atmospheric MPs deposition in ten urban areas, each with different population sizes, economic activities, and climates. The objective was to assess the role of the atmosphere in the fate of MPs by conducting a nationwide quantification of atmospheric MP deposition. To achieve this, we deployed collectors in ten different urban areas across continental Spain and the Canary Islands. We implemented a systematic sampling methodology with rigorous quality control/quality assurance, along with particle-oriented identification and quantification of anthropogenic particle deposition, which included MPs and industrially processed natural fibres. Among the sampled MPs, polyester fibres were the most abundant, followed by acrylic polymers, polypropylene, and alkyd resins. Their equivalent sizes ranged from 22 μm to 398 μm, with a median value of 71 μm. The particle size distribution of MPs showed fewer large particles than expected from a three-dimensional fractal fragmentation pattern, which was attributed to the higher mobility of small particles, especially fibres. The atmospheric deposition rate of MPs ranged from 5.6 to 78.6 MPs m-2 day-1, with the higher values observed in densely populated areas such as Barcelona and Madrid. Additionally, we detected natural polymers, mostly cellulosic fibres with evidence of industrial processing, with a deposition rate ranging from 6.4 to 58.6 particles m-2 day-1. There was a positive correlation was found between the population of the study area and the median of atmospheric MP deposition, supporting the hypothesis that urban areas act as sources of atmospheric MPs. Our study presents a systematic methodology for monitoring atmospheric MP deposition.The authors acknowledge the support provided by Spanish Network of Plastics in the Environment, EnviroPlaNet (www.enviroplanet.net) and the financial support provided by the Spanish Government, Ministerio de Ciencia e Innovación, grants PID2020-113769RB-C21/C22. The authors would like to thank the Interdepartmental Investigation Research Service of the Universidad Autónoma de Madrid (SIDI-UAM and Segainvex) for the use of their infrastructures and their technical support. J.G.S. thanks ACIISI for the contract from the Viera y Clavijo program at the University of La Laguna (85 % co-financed by the European Social Fund).Peer reviewe

Ingeniería Forestal y ambiental en medios insulares

Las Islas Canarias a pesar de su reducida extensión y del relativo poco peso específico a nivel mundial, no es ajena a los problemas globales detectados en la conservación de bosques y en la importancia que éstos tienen para obtener beneficios económicos, socioculturales y ambientales. La gestión forestal sostenible es en este sentido esencial para asegurar y compatibilizar los diversos beneficios del bosque. El papel específico de los bosques y su gestión son sin embargo temas aún por conocer en nuestras islas, por lo que el Año Internacional de los Bosques ha representado una oportunidad única para dar a conocer el mundo forestal y acercarlo a nuestra sociedad. El presente libro consta de 25 capítulos donde se ha contemplado la mayoría de los aspectos a tener en cuenta en la planificación y gestión del medio forestal y natural. Desde la historia forestal del archipiélago, hasta el uso y técnicas de manejo de los recursos naturales, incluyendo el agua, la energía en forma de biomasa y la selvicultura

Izaña Atmospheric Research Center. Activity Report 2021-2022

Editors: Emilio Cuevas, Celia Milford and Oksana Tarasova.[EN]The Izaña Atmospheric Research Center (IARC), which is part of the State Meteorological Agency of Spain (AEMET), is a site of excellence in atmospheric science. It manages four observatories in Tenerife including the high altitude Izaña Atmospheric Observatory. The Izaña Atmospheric Observatory was inaugurated in 1916 and since that date has carried out uninterrupted meteorological and climatological observations, contributing towards a unique 100-year record in 2016. This reports are a summary of the many activities at the Izaña Atmospheric Research Center to the broader community. The combination of operational activities, research and development in state-of-the-art measurement techniques, calibration and validation and international cooperation encompass the vision of WMO to provide world leadership in expertise and international cooperation in weather, climate, hydrology and related environmental issues.[ES]El Centro de Investigación Atmosférica de Izaña (CIAI), que forma parte de la Agencia Estatal de Meteorología de España (AEMET), representa un centro de excelencia en ciencias atmosféricas. Gestiona cuatro observatorios en Tenerife, incluido el Observatorio de Izaña de gran altitud, inaugurado en 1916 y que desde entonces ha realizado observaciones meteorológicas y climatológicas ininterrumpidas y se ha convertido en una estación centenaria de la OMM. Estos informes resumen las múltiples actividades llevadas a cabo por el Centro de Investigación Atmosférica de Izaña. El liderazgo del Centro en materia de investigación y desarrollo con respecto a las técnicas de medición, calibración y validación de última generación, así como la cooperación internacional, le han otorgado una reputación sobresaliente en lo que se refiere al tiempo, el clima, la hidrología y otros temas ambientales afines

Impact of COVID-19 on cardiovascular testing in the United States versus the rest of the world

Objectives: This study sought to quantify and compare the decline in volumes of cardiovascular procedures between the United States and non-US institutions during the early phase of the coronavirus disease-2019 (COVID-19) pandemic. Background: The COVID-19 pandemic has disrupted the care of many non-COVID-19 illnesses. Reductions in diagnostic cardiovascular testing around the world have led to concerns over the implications of reduced testing for cardiovascular disease (CVD) morbidity and mortality. Methods: Data were submitted to the INCAPS-COVID (International Atomic Energy Agency Non-Invasive Cardiology Protocols Study of COVID-19), a multinational registry comprising 909 institutions in 108 countries (including 155 facilities in 40 U.S. states), assessing the impact of the COVID-19 pandemic on volumes of diagnostic cardiovascular procedures. Data were obtained for April 2020 and compared with volumes of baseline procedures from March 2019. We compared laboratory characteristics, practices, and procedure volumes between U.S. and non-U.S. facilities and between U.S. geographic regions and identified factors associated with volume reduction in the United States. Results: Reductions in the volumes of procedures in the United States were similar to those in non-U.S. facilities (68% vs. 63%, respectively; p = 0.237), although U.S. facilities reported greater reductions in invasive coronary angiography (69% vs. 53%, respectively; p < 0.001). Significantly more U.S. facilities reported increased use of telehealth and patient screening measures than non-U.S. facilities, such as temperature checks, symptom screenings, and COVID-19 testing. Reductions in volumes of procedures differed between U.S. regions, with larger declines observed in the Northeast (76%) and Midwest (74%) than in the South (62%) and West (44%). Prevalence of COVID-19, staff redeployments, outpatient centers, and urban centers were associated with greater reductions in volume in U.S. facilities in a multivariable analysis. Conclusions: We observed marked reductions in U.S. cardiovascular testing in the early phase of the pandemic and significant variability between U.S. regions. The association between reductions of volumes and COVID-19 prevalence in the United States highlighted the need for proactive efforts to maintain access to cardiovascular testing in areas most affected by outbreaks of COVID-19 infection

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries