21 research outputs found

    Sample Preservation and Storage Significantly Impact Taxonomic and Functional Profiles in Metaproteomics Studies of the Human Gut Microbiome

    Get PDF
    With the technological advances of the last decade, it is now feasible to analyze microbiome samples, such as human stool specimens, using multi-omic techniques. Given the inherent sample complexity, there exists a need for sample methods which preserve as much information as possible about the biological system at the time of sampling. Here, we analyzed human stool samples preserved and stored using different methods, applying metagenomics as well as metaproteomics. Our results demonstrate that sample preservation and storage have a significant effect on the taxonomic composition of identified proteins. The overall identification rates, as well as the proportion of proteins from Actinobacteria were much higher when samples were flash frozen. Preservation in RNAlater overall led to fewer protein identifications and a considerable increase in the share of Bacteroidetes, as well as Proteobacteria. Additionally, a decrease in the share of metabolism-related proteins and an increase of the relative amount of proteins involved in the processing of genetic information was observed for RNAlater-stored samples. This suggests that great care should be taken in choosing methods for the preservation and storage of microbiome samples, as well as in comparing the results of analyses using different sampling and storage methods. Flash freezing and subsequent storage at −80 °C should be chosen wherever possible

    Three-Dimensional Printed PLA and PLA/PHA Dumbbell-Shaped Specimens: Material Defects and Their Impact on Degradation Behavior

    Get PDF
    The use of (bio)degradable polymers, especially in medical applications, requires a proper understanding of their properties and behavior in various environments. Structural elements made of such polymers may be exposed to changing environmental conditions, which may cause defects. That is why it is so important to determine the effect of processing conditions on polymer properties and also their subsequent behavior during degradation. This paper presents original research on a specimen’s damage during 70 days of hydrolytic degradation. During a standard hydrolytic degradation study of polylactide and polylactide/polyhydroxyalkanoate dumbbell-shaped specimens obtained by 3D printing with two different processing build directions, exhibited unexpected shrinkage phenomena in the last degradation series, representing approximately 50% of the length of the specimens irrespective of the printing direction. Therefore, the continuation of previous ex-ante research of advanced polymer materials is presented to identify any possible defects before they arise and to minimize the potential failures of novel polymer products during their use and also during degradation. Studies on the impact of a specific processing method, i.e., processing parameters and conditions, on the properties expressed in molar mass and thermal properties changes of specimens obtained by three-dimensional printing from polyester-based filaments, and in particular on the occurrence of unexpected shrinkage phenomena after post-processing heat treatment, are presented

    (Bio)degradable polymeric materials for a sustainable future – part 1. Organic recycling of PLA/PBAT blends in the form of prototype packages with long shelf-life

    Get PDF
    Prediction studies of advanced (bio)degradable polymeric materials are crucial when their potential applications as compostable products with long shelf-life is considered for today’s market. The aim of this study was to determine the effect of the polylactide (PLA) content in the blends of PLA and poly(butylene adipate-co-terephthalate) (PBAT); specifically how the material’s thickness corresponded to changes that occurred in products during the degradation process. Additionally, the influence of talc on the degradation profile of all samples in all environments was investigated. It was found that, differences in the degradation rate of materials tested with a similar content of the PLA component could be caused by differences in their thickness, the presence of commercial additives used during processing or a combination of both. The obtained results indicated that the presence of talc may interfere with materials behavior towards water and consequently alter their degradation profile

    Nanolayers of Poly(N,N’-Dimethylaminoethyl Methacrylate) with a Star Topology and Their Antibacterial Activity

    Get PDF
    In this paper, we focus on the synthesis and characterization of novel stable nanolayers made of star methacrylate polymers. The e ect of nanolayer modification on its antibacterial properties was also studied. A covalent immobilization of star poly(N,N0-dimethylaminoethyl methacrylate) (PDMAEMA) to benzophenone functionalized glass or silicon supports was carried out via a “grafting to” approach using UV irradiation. To date, star polymer UV immobilization has never been used for this purpose. The thickness of the resulting nanolayers increased from 30 to 120 nm with the molar mass of the immobilized stars. The successful bonding of star PDMAEMA to the supports was confirmed by surface sensitive quantitative spectroscopic methods. Next, amino groups in the polymer layer were quaternized with bromoethane, and the influence of this modification on the antibacterial properties of the obtained materials was analyzed using a selected reference strain of bacteria. The resulting star nanolayer surfaces exhibited higher antimicrobial activity against Bacillus subtilis ATCC 6633 compared to that of the linear PDMAEMA analogues grafted onto a support. These promising results and the knowledge about the influence of the topology and modification of PDMAEMA layers on their properties may help in searching for new materials for antimicrobial applications in medicine

    Three-dimensional printing of PLA and PLA/PHA dumbbell-shaped specimens of crisscross and transverse patterns as promising materials in emerging application areas: Prediction study

    Get PDF
    This is an accepted manuscript of an article published by Elsevier in Polymer degradation and stability on 18/08/2018, available online: https://doi.org/10.1016/j.polymdegradstab.2018.08.008 The accepted version of the publication may differ from the final published version.This paper presents ex-ante examination of advanced polymer materials to detect defects and define and minimize the potential failure of novel polymer products before they arise. The effect of build directions on the properties of dumbbell-shaped specimens obtained by three-dimensional printing from polylactide and polylactide/polyhydroxyalkanoate commercial filaments was investigated, as well as the hydrolytic degradation of these specimens at 50 ºC and 70 ºC. Taking into account previous studies, we have found further dependences of the properties of 3D printed species before and during abiotic degradation from the orientation of printing. The initial assumption that only the contact time with the 3D printer platform leads to an increase in the crystalline phase during printing turned out to be insufficient. Further investigations of individual parts of the dumbbell-shaped specimens showed that the size of the specimens’ surface in contact with the platform also affected the structural ordering of the material

    A comparative study of three-dimensional printing directions: The degradation and toxicological profile of a PLA/PHA blend

    Get PDF
    The use of biobased plastics is of great importance for many applications. Blending thermoplastic polylactide (PLA) with polyhydroxyalkanoate (PHA) enables the formulation of a more mechanically powerful material and this enables tailored biodegradation properties. In this study we demonstrate the 3D printing of a PLA/PHA blend as a potential candidate for biocompatible material applications. The filament for 3D printing consisted of PHA, which contains predominantly 3-hydroxybutyrate units and a small amount of 3-hydroxyvalerate units, as revealed by multistage mass spectrometry (ESI-MSn). This research found that the properties of 3D printed species before and during abiotic degradation are dependent on printing orientation. Furthermore, the 3D printed specimens exhibited good biocompatibility with HEK293 cells, indicating real promise as biological scaffolds for tissue engineering applications

    Carbon nanomaterials based chemiresistive gas sensors

    No full text

    (Bio)degradable Polymeric Materials for Sustainable Future—Part 2: Degradation Studies of P(3HB-<i>co</i>-4HB)/Cork Composites in Different Environments

    No full text
    The degree of degradation of pure poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] and its composites with cork incubated under industrial and laboratory composting conditions was investigated. The materials were parallelly incubated in distilled water at 70 &#176;C as a reference experiment (abiotic condition). It was demonstrated that addition of the cork into polyester strongly affects the matrix crystallinity. It influences the composite degradation independently on the degradation environment. Moreover, the addition of the cork increases the thermal stability of the obtained composites; this was related to a smaller reduction in molar mass during processing. This phenomenon also had an influence on the composite degradation process. The obtained results suggest that the addition of cork as a natural filler in various mass ratios to the composites enables products with different life expectancies to be obtained

    Flexible piezoresistive polystyrene composite sensors filled with hollow 3D graphitic shells

    Get PDF
    The objective of this research was to develop highly effective conductive polymer composite (CPC) materials for flexible piezoresistive sensors, utilizing hollow three-dimensional graphitic shells as a highly conductive particulate component. Polystyrene (PS), a cost-effective and robust polymer widely used in various applications such as household appliances, electronics, automotive parts, packaging, and thermal insulation materials, was chosen as the polymer matrix. The hollow spherical three-dimensional graphitic shells (GS) were synthesized through chemical vapor deposition (CVD) with magnesium oxide (MgO) nanoparticles serving as a support, which was removed post synthesis and employed as the conductive filler. Commercial multi-walled carbon nanotubes (CNTs) were used as a reference one-dimensional graphene material. The main focus of this study was to investigate the impact of the GS on the piezoresistive response of carbon/polymer composite thin films. The distribution and arrangement of GS and CNTs in the polymer matrix were analyzed using techniques such as X-ray diffraction and scanning electron microscopy, while the electrical, thermal, and mechanical properties of the composites were also evaluated. The results revealed that the PS composite films filled with GS exhibited a more pronounced piezoresistive response as compared to the CNT-based composites, despite their lower mechanical and thermal performance
    corecore