Real-Time Shadow Using a Combination of Stencil and The Z-Buffer

In this paper we describe a real-time shadow generation with volume shadow algorithm in virtual environment that is illuminated by light sources with possibility to move separately. This algorithm uses the combination of stencil and Z-buffers to generate shadow volume. It is simple to understand and implement. We have significantly improved and implemented recent techniques that are used in shadow volume algorithms using stencil buffers especially in order to recognize silhouette, reduce the number of shadow polygons and also redundant length of each triangles that makes the volume shadow. This work may be applied in commercial games or other virtual reality systems

Real-Time Shadow Using a Combination of Stencil and The Z-Buffer

In this paper we describe a real-time shadow generation with volume shadow algorithm in virtual environment that is illuminated by light sources with possibility to move separately. This algorithm uses the combination of stencil and Z-buffers to generate shadow volume. It is simple to understand and implement. We have significantly improved and implemented recent techniques that are used in shadow volume algorithms using stencil buffers especially in order to recognize silhouette, reduce the number of shadow polygons and also redundant length of each triangles that makes the volume shadow. This work may be applied in commercial games or other virtual reality systems

The success factors and barriers of information technology implementation in small and medium enterprises: an empirical study in Malaysia

The use of information technology (IT) among entrepreneurs is one of the critical aspects as the usage of IT effectively and efficiently will enable to increase productivity and performance in small and medium enterprises (SMEs). Previous reports revealed that SMEs in Malaysia have many concerns about the durability, competitiveness and efficiency due to problems associated such as financial, lack of information and knowledge, capability and capacity. This research is derived based on the issues related to IT implementation in SMEs in Malaysia. It determines the problems and issues related to the implementation, and identify factors for the successful implementation of IT in SMEs. The research approach includes the usage of questionnaires, interviews and case studies. Literature study identified ten critical success factors that include the management, staff, IT planning, financial, consultants, vendors, organisational culture, relationship management and change, and perception. This paper presents the success factors and the barrier of IT implementation based on the empirical study

N-[(2,4-Dimethyl­phen­yl)carbamothio­yl]-2-methyl­benzamide

The title compound, C17H18N2OS, adopts a trans–cis geometry of the thio­urea group which is stabilized by intra­molecular hydrogen bonds between the O atom of the carbonyl group and the H atom of the thio­amide group. A C—H⋯S intramolecular hydrogen bond is also present. In the crystal structure, mol­ecules are linked by inter­molecular N—H⋯S hydrogen bonds to form centrosymmetric dimers

Speciation of heavy metals in paddy soils from selected areas in Kedah and Penang, Malaysia

This study was carried out with the intention of evaluating heavy metal contamination in cultivated paddy areas. The speciation of heavy metals in paddy soils was determined in order to gain insight regarding their origin and distribution in soils. Five sampling sites were randomly selected from Kedah (Yan, Kota Setar, Kubang Pasu district) and Penang (Bumbung Lima district), where the soils constituted marine alluvial deposits. A site in Langkawi, where organic paddy farming is practised was used as the control. The sequential extraction method was adopted in order to obtain the four heavy metal fractions namely the easily leachable and ion exchange (ELFE), acid reducible (AR), oxidizable organic (OO) and resistant (RR) fractions. This study shows that the soil samples were clayey (82 to 96% of grain size <63 μm), fairly high in organic carbon (6.54 to 8.71%) and slightly acidic (pH 4.92 to 5.12). Heavy metal content in the soils varied widely and occurred in the following decreasing order of Fe>Mn>Cr>Cd>Pb>Zn>Cu. Heavy metals such as Pb, Cu, Cr and Zn predominantly occurred in the insoluble form (RR fraction), with the oxides of Fe and Mn incorporated into the clay minerals. Although, the fertilizers and pesticides studied contained low amounts of heavy metals, the elevated amount of amount of Mn and Cd in the soils (ELFE fraction) could possibly be attributed to the longterm and repeated application of these materials to the cultivated paddy areas.Key words: Heavy metals, paddy soil, pesticide, fertilizer

Steerable Higher-order Mode Dielectric Resonator Antenna with Parasitic Elements for 5G Applications

© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.This paper presents the findings of a steerable higher-order mode (TEy 1δ3) dielectric resonator antenna with parasitic elements. The beam steering was successfully achieved by switching the termination capacitor on the parasitic element. In this light, all of the dielectric resonator antennas (DRAs) have the same dielectric permittivity similar to that of 10 and was excited by a 50Ω microstrip with a narrow aperture. The effect of the mutual coupling on the radiation pattern and the reflection coefficient, as well as the array factor were investigated clearly using MATLAB ver. 2014b and ANSYS HFSS ver. 16. As the result, the antenna beam of the proposed DRA array managed to steer from -32° to +32° at 15 GHz. Furthermore, the measured antenna array showed the maximum gain of 9.25 dBi and the reflection coefficients which are less than -10 dB with the bandwidth more than 1.3 GHz, which is viewed as desirable for Device-to-Device communication (D2D) in 5G Internet of Things (IoT) applications

Surface Roughness and Grain Size Characterization of Annealing Temperature Effect For Growth Gallium and Tantalum Doped Ba0.5 Sr0.5TiO3Thin Film

Thin films 10 % gallium oxide doped barium strontium titanate (BGST) and 10 % tantalum oxide doped barium strontium titanate (BTST) were prepared on p-type Si (100) substrates using chemical solution deposition (CSD) method with 1.00 M precursor. The films were deposited by spin coating method with spinning speed at 3000 rpm for 30 seconds. The post deposition annealing of the films were carried out in a furnace at 200oC, 240oC, 280oC (low temperature) for 1 hour in oxygen gas atmosphere. The surface roughness and grain size analysis of the grown thin films are described by atomic force microscope (AFM) method at 5000 nm x 5000 nm area. The rms surface roughness BGST thin films at 5000 nm x 5000 nm area are 0.632 nm, 0.564 nm, 0.487 nm for temperature 200oC, 240oC, 280oC, respectively, whereas the grain size (mean diameter) are 238.4 nm, 219.0 nm, 185.1 nm for temperature 200oC, 240oC, 280oC, respectively. In fact, to increase annealing temperature from 200oC to 280oC would result in decreasing the rms roughness and grain size. Therefore, rms roughness and grain size would have the strong correlation annealing temperature. Received: 9 November 2008; Revised: 24 August 2009; Accepted: 25 August 200

Torrefaction of palm biomass briquettes at different temperature

The climate change has driven towards transformation from the high energy dependence on fossil fuel to inexhaustible renewable energy such as solar, wind, mini hydro and biomass. In Malaysia, abundant of palm biomass residues are produced during the processing of fresh fruit bunch. Therefore it is inevitable to harness these bioenergy sources in order to prevent waste accumulation at adjacent to palm mills. In order to utilize such bioenergy sources and to cope with the fast growing demand of energy, combination technique of densification and torrefaction is one of the potential ways to be practised. In the present study, the physical and combustion properties of torrefied empty fruit bunch (EFB) briquettes were investigated experimentally with constant nitrogen flow rate of 1 l/min, for various torrefaction temperatures (225 °C-300 °C). Before torrefaction process, EFB briquettes were initially produced under controlled condition with compaction pressure of 7 MPa and briquetting temperature of 150 °C. In general, the torrefied EFB briquettes were successfully produced in the present study. The results show that an increase in torrefaction temperature from 225°C to 300℃ causes a significant increase in gross calorific value (from around 17400 kJ/kg to 25000 kJ/kg), fixed carbon content (from 16.2% to 46.2%) and ash content (from 2.4% to 17.2%). On the other hand, relaxed density and volatile matter decrease, from 1017 kg/m3 to 590 kg/m3 and from 73.1% to 29.7%, respectively. As a conclusion, the gross calorific value and fixed carbon content are improved due to torrefaction. In addition, it was found that gross calorific value and moisture content of the torrefied EFB briquettes fulfil the requirement for commercial briquette production as stated by DIN51731 (gross calorific value>17500 kJ/kg and moisture content <10%)

Design of shunt hybrid active power filter for compensating harmonic currents and reactive power

For the past two decades, tremendous advancements have been achieved in the electricity industry. The usage of non-linear loads in the daily life has affected the power quality of the system and caused the presence of harmonics. To compensate the harmonic currents and reactive power in the system, the design of shunt hybrid active power filter has been proposed in this research. The design of the filter has included several control systems of instantaneous active and reactive power (p-q) theory and PI controller to investigate the performance of the filter. The robustness of the designed hybrid power filter has also been benchmarked with the other filter topologies available in literature. The hybrid power filter will combine passive power filter and active power filter configurated in shunt connection. The result of this research showed that the total harmonic distortion analyzed is below than 5% according to IEEE-519 standard requirements and reactive power is compensated proved by the increase in power factor. The shunt hybrid active power filter is designed, and simulation result is analyzed by using MATLAB-Simulink environment