Ferropericlase inclusions in ultradeep diamonds from Sao Luiz (Brazil): High Li abundances and diverse Li-isotope and trace element compositions suggest an origin from a subduction mélange

The most remarkable feature of the inclusion suite in ultradeep alluvial and kimberlitic diamonds from Sao Luiz (Juina area in Brazil) is the enormous range in Mg# [100xMg/(Mg + Fe)] of the ferropericlases (fper). The Mg-richer ferropericlases are from the boundary to the lower mantle or from the lower mantle itself when they coexist with ringwoodite or Mg- perovskite (bridgmanite). This, however, is not an explanation for the more Fe-rich members and a lowermost mantle or a “D” layer origin has been proposed for them. Such a suggested ultra-deep origin separates the Fe-rich fper-bearing diamonds from the rest of the Sao Luiz ultradeep diamond inclusion suite, which also contains Ca-rich phases. These are now thought to have an origin in the uppermost lower mantle and in the transition zone and to belong either to a peridotitic or mafic (subducted oceanic crust) protolith lithology. We analysed a new set of more Fe-rich ferropericlase inclusions from 10 Sao Luiz ultradeep alluvial diamonds for their Li isotope composition by solution MC-ICP-MS (multi collector inductively coupled plasma mass spectrometry), their major and minor elements by EPMA (electron probe micro-analyser) and their Li-contents by SIMS (secondary ion mass spectrometry), with the aim to understand the origin of the ferropericlase protoliths. Our new data confirm the wide range of ferropericlase Mg# that were reported before and augment the known lack of correlation between major and minor elements. Four pooled ferropericlase inclusions from four diamonds provided sufficient material to determine for the first time their Li isotope composition, which ranges from δ7Li + 9.6 ‰ to −3.9 ‰. This wide Li isotopic range encompasses that of serpentinized ocean floor peridotites including rodingites and ophicarbonates, fresh and altered MORB (mid ocean ridge basalt), seafloor sediments and of eclogites. This large range in Li isotopic composition, up to 5 times higher than ‘primitive upper mantle’ Li-abundances, and an extremely large and incoherent range in Mg# and Cr, Ni, Mn, Na contents in the ferropericlase inclusions suggests that their protoliths were members of the above lithologies. This mélange of altered rocks originally contained a variety of carbonates (calcite, magnesite, dolomite, siderite) and brucite as the secondary products in veins and as patches and Ca-rich members like rodingites and ophicarbonates. Dehydration and redox reactions during or after deep subduction into the transition zone and the upper parts of the lower mantle led to the formation of diamond and ferropericlase inclusions with variable compositions and a predominance of the Ca-rich, high-pressure silicate inclusions. We suggest that the latter originated from peridotites, mafic rocks and sedimentary rocks as redox products between calcite and SiO2

MPI-DING reference glasses for in situ microanalysis: New reference values for element concentrations and isotope ratios

We present new analytical data of major and trace elements for the geological MPI-DING glasses KL2-G, ML3B-G, StHs6/80-G, GOR128-G, GOR132-G, BM90/21-G, T1-G, and ATHO-G. Different analytical methods were used to obtain a large spectrum of major and trace element data, in particular, EPMA, SIMS, LA-ICPMS, and isotope dilution by TIMS and ICPMS. Altogether, more than 60 qualified geochemical laboratories worldwide contributed to the analyses, allowing us to present new reference and information values and their uncertainties (at 95% confidence level) for up to 74 elements. We complied with the recommendations for the certification of geological reference materials by the International Association of Geoanalysts (IAG). The reference values were derived from the results of 16 independent techniques, including definitive (isotope dilution) and comparative bulk (e.g., INAA, ICPMS, SSMS) and microanalytical (e.g., LA-ICPMS, SIMS, EPMA) methods. Agreement between two or more independent methods and the use of definitive methods provided traceability to the fullest extent possible. We also present new and recently published data for the isotopic compositions of H, B, Li, O, Ca, Sr, Nd, Hf, and Pb. The results were mainly obtained by high-precision bulk techniques, such as TIMS and MC-ICPMS. In addition, LA-ICPMS and SIMS isotope data of B, Li, and Pb are presented. Copyright 2006 by the American Geophysical Union

MPI-Ding reference glasses for in situ microanalysis: New reference values for element concentrations and isotope ratios

We present new analytical data of major and trace elements for the geological MPI-DING glasses KL2-G, ML3B-G, StHs6/80-G, GOR128-G, GOR132-G, BM90/21-G, T1-G, and ATHO-G. Different analytical methods were used to obtain a large spectrum of major and trace element data, in particular, EPMA, SIMS, LA-ICPMS, and isotope dilution by TIMS and ICPMS. Altogether, more than 60 qualified geochemical laboratories worldwide contributed to the analyses, allowing us to present new reference and information values and their uncertainties (at 95% confidence level) for up to 74 elements. We complied with the recommendations for the certification of geological reference materials by the International Association of Geoanalysts (IAG). The reference values were derived from the results of 16 independent techniques, including definitive (isotope dilution) and comparative bulk (e.g., INAA, ICPMS, SSMS) and microanalytical (e.g., LA-ICPMS, SIMS, EPMA) methods. Agreement between two or more independent methods and the use of definitive methods provided traceability to the fullest extent possible. We also present new and recently published data for the isotopic compositions of H, B, Li, O, Ca, Sr, Nd, Hf, and Pb. The results were mainly obtained by high-precision bulk techniques, such as TIMS and MC-ICPMS. In addition, LA-ICPMS and SIMS isotope data of B, Li, and Pb are presented

Accessories in Kaiserstuhl carbonatites and related rocks as accurate and faithful recorders of whole rock age and isotopic composition

The accessories perovskite, pyrochlore, zirconolite, calzirtite and melanite from carbonatites and carbonate-rich foidites from the Kaiserstuhl are variously suited for the in situ determination of their U–Pb ages and Sr, Nd- and Hf-isotope ratios by LA-ICP-MS. The 143Nd/144Nd ratios may be determined precisely in all five phases, the 176Hf/177Hf ratios only in calzirtite and the 87Sr/86Sr ratios in perovskites and pyrochlores. The carbonatites and carbonate-rich foidites belong to one of the three magmatic groups that Schleicher et al. (1990) distinguished in the Kaiserstuhl on the basis of their Sr, Nd and Pb isotope ratios. Tephrites, phonolites and essexites (nepheline monzogabbros) form the second and limburgites (nepheline basanites) and olivine nephelinites the third. Our 87Sr/86Sr isotope data from the accessories overlap with the carbonatite and olivine nephelinite fields defined by Schleicher et al. (1990) but exhibit a much narrower range. These and the εNd and εHf values plot along the mantle array in the field of oceanic island basalts relatively close to mid-ocean ridge basalts. Previously reported K–Ar, Ar–Ar and fission track ages for the Kaiserstuhl lie between 16.2 and 17.8 Ma. They stem entirely from the geologically older tephrites, phonolites and essexites. No ages existed so far for the geologically younger carbonatites and carbonate-rich foidites except for one apatite fission track age (15.8 Ma). We obtained precise U–Pb ages for zirconolites and calzirtites of 15.66, respectively 15.5 Ma (± 0.1 2σ) and for pyrochlores of 15.35 ± 0.24 Ma. Only the perovskites from the Badberg soevite yielded a U–P concordia age of 14.56 ± 0.86 Ma while the perovskites from bergalites (haüyne melilitites) only gave 206Pb/238U and 208Pb/232Th ages of 15.26 ± 0.21, respectively, 15.28 ± 0.48 Ma. The main Kaiserstuhl rock types were emplaced over a time span of 1.6 Ma almost 1 million years before the carbonatites and carbonate-rich foidites. These were emplaced within only 0.32 Ma.Frankfurt Institute for Advanced Studies (FIAS) (4401

Accessories in Kaiserstuhl carbonatites and related rocks as accurate and faithful recorders of whole rock age and isotopic composition

<jats:title>Abstract</jats:title><jats:p>The accessories perovskite, pyrochlore, zirconolite, calzirtite and melanite from carbonatites and carbonate-rich foidites from the Kaiserstuhl are variously suited for the in situ determination of their U–Pb ages and Sr, Nd- and Hf-isotope ratios by LA-ICP-MS. The <jats:sup>143</jats:sup>Nd/<jats:sup>144</jats:sup>Nd ratios may be determined precisely in all five phases, the <jats:sup>176</jats:sup>Hf/<jats:sup>177</jats:sup>Hf ratios only in calzirtite and the <jats:sup>87</jats:sup>Sr/<jats:sup>86</jats:sup>Sr ratios in perovskites and pyrochlores. The carbonatites and carbonate-rich foidites belong to one of the three magmatic groups that Schleicher et al. (1990) distinguished in the Kaiserstuhl on the basis of their Sr, Nd and Pb isotope ratios. Tephrites, phonolites and essexites (nepheline monzogabbros) form the second and limburgites (nepheline basanites) and olivine nephelinites the third. Our <jats:sup>87</jats:sup>Sr/<jats:sup>86</jats:sup>Sr isotope data from the accessories overlap with the carbonatite and olivine nephelinite fields defined by Schleicher et al. (1990) but exhibit a much narrower range. These and the εNd and εHf values plot along the mantle array in the field of oceanic island basalts relatively close to mid-ocean ridge basalts. Previously reported K–Ar, Ar–Ar and fission track ages for the Kaiserstuhl lie between 16.2 and 17.8 Ma. They stem entirely from the geologically older tephrites, phonolites and essexites. No ages existed so far for the geologically younger carbonatites and carbonate-rich foidites except for one apatite fission track age (15.8 Ma). We obtained precise U–Pb ages for zirconolites and calzirtites of 15.66, respectively 15.5 Ma (± 0.1 2<jats:italic>σ</jats:italic>) and for pyrochlores of 15.35 ± 0.24 Ma. Only the perovskites from the Badberg soevite yielded a U–P concordia age of 14.56 ± 0.86 Ma while the perovskites from bergalites (haüyne melilitites) only gave <jats:sup>206</jats:sup>Pb/<jats:sup>238</jats:sup>U and <jats:sup>208</jats:sup>Pb/<jats:sup>232</jats:sup>Th ages of 15.26 ± 0.21, respectively, 15.28 ± 0.48 Ma. The main Kaiserstuhl rock types were emplaced over a time span of 1.6 Ma almost 1 million years before the carbonatites and carbonate-rich foidites. These were emplaced within only 0.32 Ma.</jats:p&gt

Element Transfer and Redox Conditions in Continental Subduction Zones: New Insights from Peridotites of the Ulten Zone, North Italy

The orogenic peridotites and pyroxenites of the Ulten Zone (north Italy) record multistage metasomatism by crust-derived melts and fluids within a Late-Variscan mantle wedge. We acquired new major and trace element data as well as garnet and whole-rock iron speciation for a representative suite of samples, with the aim to further constrain element cycling and the redox state attending the development of the major mineralogical and textural rock types that occur within the Ulten Zone. Initially, spinel peridotites were refertilized by mafic melts in the hot and shallow mantle wedge, followed by garnet formation as the peridotites were carried towards a cool, subducting slab of continental crust by corner flow. Upon exhumation, ingress of aqueous, crust-derived fluids provoked amphibole-forming reactions, which caused gradual consumption of garnet and clinopyroxene and transformation from coarse-to fine-grained assemblages. Since Si, Al, Na, Ti, Ca and HREE formerly stored in reactants were not fully accommodated in newly-formed phases, these elements were partially removed from the bulk-rock, generating more depleted compositions resembling residues after partial melting. Unexpectedly, the remaining garnet retains low Fe 3+ / Fe (<0·046) even after the bulk-rocks became strongly enriched in Fe 3+ during metasomatism and retrogression (Fe 3+ / Fe = 0·11-0·23), which was mostly stored in coexistent amphibole and interstitial serpentine. Low Fe 3+ / Fe in garnet is consistent with "logfO 2 = FMQ-1·7 to FMQ-0·3 at 2 GPa. Combined with previous studies, this is evidence for garnet growth within a heterogeneously oxidized mantle wedge, reflecting a variable extent of percolation by oxidizing aqueous fluids. During metasomatism, concomitant variable enrichment in LILE, LREE and some HFSE, and significant compositional differences between sampling localities, reflect both variable fluid/rock ratios at small spatial scales but also indicate chromatographic effects that likely relate to different positions relative to the subducting crust releasing fluids into the mantle wedge. Hydration by dilute fluids during retrogression did not result in additional enrichment in fluid-mobile elements, but caused further replacement of garnet and clinopyroxene. This study highlights the control that changing mineralogies, developed in response to interaction with various crustal melts and fluids under variable pressure-Temperature and redox conditions in a continental subduction zone, exert on the retention or release of major and trace elements in peridotite. In particular, formation and/or persistence of amphibole and dolomite, as documented in the present study, suggest that the subduction-modified mantle wedge is an efficient trap for volatiles and fluid-mobile elements

Breyite inclusions in diamond: experimental evidence for possible dual origin

Inclusions of breyite (previously known as walstromite-structured CaSiO3) in diamond are usually interpreted as retrogressed CaSiO3 perovskite trapped in the transition zone or the lower mantle. However, the thermodynamic stability field of breyite does not preclude its crystallization together with diamond under upper-mantle conditions (6–10 GPa). The possibility of breyite forming in subducted sedimentary material through the reaction CaCO3 + SiO2 = CaSiO3 + C + O2 was experimentally evaluated in the CaO–SiO2–C–O2 ± H2O system at 6–10 GPa, 900–1500 ∘C and oxygen fugacity 0.5–1.0 log units below the Fe–FeO (IW) buffer. One experimental series was conducted in the anhydrous subsystem and aimed at determining the melting temperature of the aragonite–coesite (or stishovite) assemblage. It was found that melting occurs at a lower temperature (∼1500 ∘C) than the decarbonation reaction, which indicates that breyite cannot be formed from aragonite and silica under anhydrous conditions and an oxygen fugacity above IW – 1. In the second experimental series, we investigated partial melting of an aragonite–coesite mixture under hydrous conditions at the same pressures and redox conditions. The melting temperature in the presence of water decreased strongly (to 900–1200 ∘C), and the melt had a hydrous silicate composition. The reduction of melt resulted in graphite crystallization in equilibrium with titanite-structured CaSi2O5 and breyite at ∼1000 ∘C. The maximum pressure of possible breyite formation is limited by the reaction CaSiO3 + SiO2 = CaSi2O5 at ∼8 GPa. Based on the experimental results, it is concluded that breyite inclusions found in natural diamond may be formed from an aragonite–coesite assemblage or carbonate melt at 6–8 GPa via reduction at high water activity

Formation of abiotic hydrocarbon from reduction of carbonate in subduction zones. Constraints from petrological observation and experimental simulation

Subduction is a key process for linking the carbon cycle between the Earth's surface and its interior. Knowing the carbonation and decarbonation processes in the subduction zone is essential for understanding the global deep carbon cycle. In particular, the potential role of hydrocarbon fluids in subduction zones is not well understood and has long been debated. Here we report graphite and light hydrocarbon-bearing inclusions in the carbonated eclogite from the Southwest (S.W.) Tianshan subduction zone, which is estimated to have originated at a depth of at least 80 kilometers. The formation of graphite and light hydrocarbon likely results from the reduction of carbonate under low oxygen fugacity (∼FMQ - 2.5 log units). To better understand the origin of light hydrocarbons, we also investigated the reaction between iron-bearing carbonate and water under conditions relevant to subduction zone environments using large-volume high-pressure apparatus. Our high-pressure experiments provide additional constraints on the formation of abiotic hydrocarbons and graphite/diamond from carbonate-water reduction. In the experimental products, the speciation and concentration of the light hydrocarbons including methane (CH4), ethane (C2H6), and propane (C3H8) were unambiguously determined using gas chromatograph techniques. The formation of these hydrocarbons is accompanied by the formation of graphite and oxidized iron in the form of magnetite (Fe3O4). We observed the identical mineral assemblage (iron-bearing dolomite, magnetite, and graphite) associated with the formation of the hydrocarbons in both naturally carbonated eclogite and the experimental run products, pointing toward the same formation mechanism. The reduction of the carbonates under low oxygen fugacity is, thus, an important mechanism in forming abiotic hydrocarbons and graphite/diamond in the subduction zone settings