633 research outputs found
The International Urban Energy Balance Models Comparison Project: First Results from Phase 1
A large number of urban surface energy balance models now exist with different assumptions about the
important features of the surface and exchange processes that need to be incorporated. To date, no com-
parison of these models has been conducted; in contrast, models for natural surfaces have been compared
extensively as part of the Project for Intercomparison of Land-surface Parameterization Schemes. Here, the
methods and first results from an extensive international comparison of 33 models are presented. The aim of
the comparison overall is to understand the complexity required to model energy and water exchanges in
urban areas. The degree of complexity included in the models is outlined and impacts on model performance
are discussed. During the comparison there have been significant developments in the models with resulting
improvements in performance (root-mean-square error falling by up to two-thirds). Evaluation is based on a
dataset containing net all-wave radiation, sensible heat, and latent heat flux observations for an industrial area in
Vancouver, British Columbia, Canada. The aim of the comparison is twofold: to identify those modeling ap-
proaches that minimize the errors in the simulated fluxes of the urban energy balance and to determine the
degree of model complexity required for accurate simulations. There is evidence that some classes of models
perform better for individual fluxes but no model performs best or worst for all fluxes. In general, the simpler
models perform as well as the more complex models based on all statistical measures. Generally the schemes
have best overall capability to model net all-wave radiation and least capability to model latent heat flux
The International Urban Energy Balance Comparison Project: Initial Results from Phase 2.
Many urban land surface schemes have been developed, incorporating different assumptions about the features of, and processes occurring at, the surface. Here, the first results from Phase 2 of an international comparison are presented. Evaluation is based on analysis of the last 12 months of a 15 month dataset. In general, the schemes have best overall capability to model net all-wave radiation. The models that perform well for one flux do not necessarily perform well for other fluxes. Generally there is better performance for net all wave radiation than sensible heat flux. The degree of complexity included in the models is outlined, and impacts on model performance are discussed in terms of the data made available to modellers at four successive stages
Recommended from our members
Characterization of energy flux partitioning in urban environments: links with surface seasonal properties
A better understanding of links between the properties of the urban environment and the exchange to the atmosphere is central to a wide range of applications. The numerous measurements of surface energy balance data in urban areas enable intercomparison of observed fluxes from distinct environments. This study analyzes a large database in two new ways. First, instead of normalizing fluxes using net all-wave radiation only the incoming radiative fluxes are used, to remove the surface attributes from the denominator. Second, because data are now available year-round, indices are developed to characterize the fraction of the surface (built; vegetation) actively engaged in energy exchanges. These account for shading patterns within city streets and seasonal changes in vegetation phenology; their impact on the partitioning of the incoming radiation is analyzed. Data from 19 sites in North America, Europe, Africa, and Asia (including 6-yr-long observation campaigns) are used to derive generalized surface–flux relations. The midday-period outgoing radiative fraction decreases with an increasing total active surface index, the stored energy fraction increases with an active built index, and the latent heat fraction increases with an active vegetated index. Parameterizations of these energy exchange ratios as a function of the surface indices [i.e., the Flux Ratio–Active Index Surface Exchange (FRAISE) scheme] are developed. These are used to define four urban zones that characterize energy partitioning on the basis of their active surface indices. An independent evaluation of FRAISE, using three additional sites from the Basel Urban Boundary Layer Experiment (BUBBLE), yields accurate predictions of the midday flux partitioning at each location
An integrated wind risk warning model for urban rail transport in Shanghai, China
The integrated wind risk warning model for rail transport presented has four elements:
Background wind data, a wind field model, a vulnerability model, and a risk model. Background
wind data uses observations in this study. Using the wind field model with effective surface
roughness lengths, the background wind data are interpolated to a 30-m resolution grid. In the
vulnerability model, the aerodynamic characteristics of railway vehicles are analyzed with CFD
(Computational Fluid Dynamics) modelling. In the risk model, the maximum value of three
aerodynamic forces is used as the criteria to evaluate rail safety and to quantify the risk level under
extremely windy weather. The full model is tested for the Shanghai Metro Line 16 using wind
conditions during Typhoon Chan-hom. The proposed approach enables quick quantification of real-
time safety risk levels during typhoon landfall, providing sophisticated warning information for
rail vehicle operation safety
Recommended from our members
Net carbon dioxide emissions from central London
Carbon dioxide (CO2) emissions from cities drive increased global atmospheric CO2 concentrations and associated climate change. Urban CO2 emissions can be evaluated using an inventory approach (summing all know emissions and sequestrations of CO 2 within a defined area), and/or a micrometeorological approach (summing the exchanges of CO2 through the sides of a defined volume of air, and the change in the total stored within the volume). Generally the micrometeorological approach, with the assumption that only the net turbulent vertical flux of CO2 is significant on annual timescales, is preferred. This study evaluates that assumption with respect to storage and vertical advection of CO2, and calculates net CO 2 emissions in central London using both methods
for June 2012 to May 2013. Data sources include an eddy covariance system, switched horizontal and vertical CO 2 profiles, traffic counts and vegetation surveys. Annual total emissions were 51.4 and 53.5 kg CO2 m−2 y−1, (micrometeorological and inventory methods, respectively), i.e., within 4%, (1.3% with the assumption that the net vertical turbulent flux is the only non-negligible micrometeorological term). This study supports the use of vertical fluxes calculated from eddy covariance measurements at a single location to estimate total emissions from high density urban environments
Recommended from our members
Urban storage heat flux variability explored using satellite, meteorological and geodata
The storage heat flux (ΔQS) is the net flow of heat stored within a volume that may include the air, trees, buildings and ground. Given the difficulty of measurement of this important and large flux in urban areas, we explore the use of Earth Observation (EO) data. EO surface temperatures are used with ground-based meteorological forcing, urban morphology, land cover and land use information to estimate spatial variations of ΔQS in urban areas using the Element Surface Temperature Method (ESTM). First, we evaluate ESTM for four “simpler” surfaces. These have good agreement with observed values. ESTM coupled to SUEWS (an urban land surface model) is applied to three European cities (Basel, Heraklion, London), allowing EO data to enhance the exploration of the spatial variability in ΔQS. The impervious surfaces (paved and buildings) contribute most to ΔQS. Building wall area seems to explain variation of ΔQS most consistently. As the paved fraction increases up to 0.4, there is a clear increase in ΔQS. With a larger paved fraction, the fraction of buildings and wall area is lower which reduces the high values of ΔQS
Recommended from our members
Modelling the partitioning of turbulent fluxes at urban sites with varying vegetation cover
Inclusion of vegetation is critical for urban land surface models (ULSM) to represent reasonably the turbulent sensible and latent heat flux densities in an urban environment. Here the Joint UK Land Environment Simulator (JULES), an ULSM, is used to simulate the Bowen ratio at a number of urban and rural sites with vegetation cover varying between 1% and 98%. The results show that JULES is able to represent the observed Bowen ratios, but only when the additional anthropogenic water supplied into the urban ecosystem is considered. The impact of the external water use (irrigation, street cleaning), for example, on the surface energy flux partitioning can be as substantial as that of the anthropogenic heat flux on the sensible and latent heat fluxes. The Bowen ratio varies from 1-2 when the plan area vegetation fraction is between 30% and 70%. However, when the vegetation fraction is less than 20%, the Bowen ratios increase substantially (2-10) and have greater sensitivity to assumptions about external water use. As there are few long term observational sites with vegetation cover less than 30%, there is a clear need for more measurement studies in such environments
Recommended from our members
Key conclusions of the first international urban land surface model comparison project
he first international urban land surface model comparison was designed to identify three aspects of the urban surface-atmosphere interactions: (1) the dominant physical processes, (2) the level of complexity required to model these, and 3) the parameter requirements for such a model. Offline simulations from 32 land surface schemes, with varying complexity, contributed to the comparison. Model results were analysed within a framework of physical classifications and over four stages. The results show that the following are important urban processes; (i) multiple reflections of shortwave radiation within street canyons, (ii) reduction in the amount of visible sky from within the canyon, which impacts on the net long-wave radiation, iii) the contrast in surface temperatures between building roofs and street canyons, and (iv) evaporation from vegetation. Models that use an appropriate bulk albedo based on multiple solar reflections, represent building roof surfaces separately from street canyons and include a representation of vegetation demonstrate more skill, but require parameter information on the albedo, height of the buildings relative to the width of the streets (height to width ratio), the fraction of building roofs compared to street canyons from a plan view (plan area fraction) and the fraction of the surface that is vegetated. These results, whilst based on a single site and less than 18 months of data, have implications for the future design of urban land surface models, the data that need to be measured in urban observational campaigns, and what needs to be included in initiatives for regional and global parameter databases
Recommended from our members
Investigation of the impact of anthropogenic heat flux within an urban land surface model and PILPS-urban
Results from the first international urban model comparison experiment (PILPS-Urban) suggested that models which neglected the anthropogenic heat flux within the surface energy balance performed at least as well as models that include the source term, but this could not be explained. The analyses undertaken show that the results from PILPS-Urban were masked by the signal from including vegetation, which was identified in PILPS-Urban as being important. Including the anthropogenic heat flux does give improved performance, but the benefit is small for the site studied given the relatively small magnitude of this flux relative to other terms in the surface energy balance. However, there is no further benefit from including temporal variations in the flux at this site. The importance is expected to increase at sites with a larger anthropogenic heat flux and greater temporal variations
Recommended from our members
Local-scale urban meteorological parameterization scheme (LUMPS): longwave radiation parameterization and seasonality-related developments
Recent developments to the Local-scale Urban Meteorological Parameterization Scheme (LUMPS), a simple model able to simulate the urban energy balance, are presented. The major development is the coupling of LUMPS to the Net All-Wave Radiation Parameterization (NARP). Other enhancements include that the model now accounts for the changing availability of water at the surface, seasonal variations of active vegetation, and the anthropogenic heat flux, while maintaining the need for only commonly available meteorological observations and basic surface characteristics. The incoming component of the longwave radiation (L↓) in NARP is improved through a simple relation derived using cloud cover observations from a ceilometer collected in central London, England. The new L↓ formulation is evaluated with two independent multiyear datasets (Łódź, Poland, and Baltimore, Maryland) and compared with alternatives that include the original NARP and a simpler one using the National Climatic Data Center cloud observation database as input. The performance for the surface energy balance fluxes is assessed using a 2-yr dataset (Łódź). Results have an overall RMSE < 34 W m−2 for all surface energy balance fluxes over the 2-yr period whe
- …