Optimizing the colour and fabric of targets for the control of the tsetse fly Glossina fuscipes fuscipes

Background: Most cases of human African trypanosomiasis (HAT) start with a bite from one of the subspecies of Glossina fuscipes. Tsetse use a range of olfactory and visual stimuli to locate their hosts and this response can be exploited to lure tsetse to insecticide-treated targets thereby reducing transmission. To provide a rational basis for cost-effective designs of target, we undertook studies to identify the optimal target colour. Methodology/Principal Findings: On the Chamaunga islands of Lake Victoria , Kenya, studies were made of the numbers of G. fuscipes fuscipes attracted to targets consisting of a panel (25 cm square) of various coloured fabrics flanked by a panel (also 25 cm square) of fine black netting. Both panels were covered with an electrocuting grid to catch tsetse as they contacted the target. The reflectances of the 37 different-coloured cloth panels utilised in the study were measured spectrophotometrically. Catch was positively correlated with percentage reflectance at the blue (460 nm) wavelength and negatively correlated with reflectance at UV (360 nm) and green (520 nm) wavelengths. The best target was subjectively blue, with percentage reflectances of 3%, 29%, and 20% at 360 nm, 460 nm and 520 nm respectively. The worst target was also, subjectively, blue, but with high reflectances at UV (35% reflectance at 360 nm) wavelengths as well as blue (36% reflectance at 460 nm); the best low UV-reflecting blue caught 3× more tsetse than the high UV-reflecting blue. Conclusions/Significance: Insecticide-treated targets to control G. f. fuscipes should be blue with low reflectance in both the UV and green bands of the spectrum. Targets that are subjectively blue will perform poorly if they also reflect UV strongly. The selection of fabrics for targets should be guided by spectral analysis of the cloth across both the spectrum visible to humans and the UV region

Towards an optimal design of target for tsetse control: comparisons of novel targets for the control of palpalis group tsetse in West Africa

Background: Tsetse flies of the Palpalis group are the main vectors of sleeping sickness in Africa. Insecticide impregnated targets are one of the most effective tools for control. However, the cost of these devices still represents a constraint to their wider use. The objective was therefore to improve the cost effectiveness of currently used devices. Methodology/Principal Findings: Experiments were performed on three tsetse species, namely Glossina palpalis gambiensis and G. tachinoides in Burkina Faso and G. p. palpalis in Côte d'Ivoire. The 1×1 m2 black blue black target commonly used in W. Africa was used as the standard, and effects of changes in target size, shape, and the use of netting instead of black cloth were measured. Regarding overall target shape, we observed that horizontal targets (i.e. wider than they were high) killed 1.6-5x more G. p. gambiensis and G. tachinoides than vertical ones (i.e. higher than they were wide) (P<0.001). For the three tsetse species including G. p. palpalis, catches were highly correlated with the size of the target. However, beyond the size of 0.75 m, there was no increase in catches. Replacing the black cloth of the target by netting was the most cost efficient for all three species. Conclusion/Significance: Reducing the size of the current 1*1 m black-blue-black target to horizontal designs of around 50 cm and replacing black cloth by netting will improve cost effectiveness six-fold for both G. p. gambiensis and G. tachinoides. Studying the visual responses of tsetse to different designs of target has allowed us to design more cost-effective devices for the effective control of sleeping sickness and animal trypanosomiasis in Africa

The microbiome in chronic inflammatory airway disease: A threatened species

The human body is exposed to a multitude of microbes and infectious organisms  throughout life. Many of these organisms colonise the skin, gastrointestinal tract (GIT) and airway. We now recognise that this colonisation includes the lower airway,   previously thought to be sterile. These colonising organisms play an important role in disease prevention, including an array of chronic inflammatory conditions that are unrelated to infectious diseases. However, new evidence of immune dysregulation suggests that early colonisation, especially of the GIT and airway, by pathogenic micro-organisms, has deleterious effects that may contribute to the potential to induce  chronic inflammation in young children, which may only express itself in adult life

Finite temperature stability and dimensional crossover of exotic superfluidity in lattices

We investigate exotic paired states of spin-imbalanced Fermi gases in anisotropic lattices, tuning the dimension between one and three. We calculate the finite temperature phase diagram of the system using real-space dynamical mean-field theory in combination with the quantum Monte Carlo method. We find that regardless of the intermediate dimensions examined, the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) state survives to reach about one third of the BCS critical temperature of the spin-density balanced case. We show how the gapless nature of the state found is reflected in the local spectral function. While the FFLO state is found at a wide range of polarizations at low temperatures across the dimensional crossover, with increasing temperature we find out strongly dimensionality-dependent melting characteristics of shell structures related to harmonic confinement. Moreover, we show that intermediate dimension can help to stabilize an extremely uniform finite temperature FFLO state despite the presence of harmonic confinement.Comment: 5 pages, 3 figure

Developing a model to estimate the potential impact of municipal investment on city health

This article summarizes a process which exemplifies the potential impact of municipal investment on the burden of cardiovascular disease (CVD) in city populations. We report on Developing an evidence-based approach to city public health planning and investment in Europe (DECiPHEr), a project part funded by the European Union. It had twin objectives: first, to develop and validate a vocational educational training package for policy makers and political decision takers; second, to use this opportunity to iterate a robust and user-friendly investment tool for maximizing the public health impact of 'mainstream' municipal policies, programs and investments. There were seven stages in the development process shared by an academic team from Sheffield Hallam University and partners from four cities drawn from the WHO European Healthy Cities Network. There were five iterations of the model resulting from this process. The initial focus was CVD as the biggest cause of death and disability in Europe. Our original prototype 'cost offset' model was confined to proximal determinants of CVD, utilizing modified 'Framingham' equations to estimate the impact of population level cardiovascular risk factor reduction on future demand for acute hospital admissions. The DECiPHEr iterations first extended the scope of the model to distal determinants and then focused progressively on practical interventions. Six key domains of local influence on population health were introduced into the model by the development process: education, housing, environment, public health, economy and security. Deploying a realist synthesis methodology, the model then connected distal with proximal determinants of CVD. Existing scientific evidence and cities' experiential knowledge were 'plugged-in' or 'triangulated' to elaborate the causal pathways from domain interventions to public health impacts. A key product is an enhanced version of the cost offset model, named Sheffield Health Effectiveness Framework Tool, incorporating both proximal and distal determinants in estimating the cost benefits of domain interventions. A key message is that the insights of the policy community are essential in developing and then utilising such a predictive tool

Improving the Cost-Effectiveness of Artificial Visual Baits for Controlling the Tsetse Fly Glossina fuscipes fuscipes

Tsetse flies, which transmit sleeping sickness to humans and nagana to cattle, are commonly controlled by stationary artificial baits consisting of traps or insecticide-treated screens known as targets. In Kenya the use of electrocuting sampling devices showed that the numbers of Glossina fuscipes fuscipes (Newstead) visiting a biconical trap were nearly double those visiting a black target of 100 cm×100 cm. However, only 40% of the males and 21% of the females entered the trap, whereas 71% and 34%, respectively, alighted on the target. The greater number visiting the trap appeared to be due to its being largely blue, rather than being three-dimensional or raised above the ground. Through a series of variations of target design we show that a blue-and-black panel of cloth (0.06 m2) flanked by a panel (0.06 m2) of fine black netting, placed at ground level, would be about ten times more cost-effective than traps or large targets in control campaigns. This finding has important implications for controlling all subspecies of G. fuscipes, which are currently responsible for more than 90% of sleeping sickness cases

How do tsetse recognise their hosts? The role of shape in the responses of tsetse (Glossina fuscipes and G. palpalis) to artificial hosts

Palpalis-group tsetse, particularly the subspecies of Glossina palpalis and G. fuscipes, are the most important transmitters of human African trypanomiasis (HAT), transmitting .95% of cases. Traps and insecticide-treated targets are used to control tsetse but more cost-effective baits might be developed through a better understanding of the fly’s host-seeking behaviour.Electrocuting grids were used to assess the numbers of G. palpalis palpalis and G. fuscipes quanzensis attracted to and landing on square or oblong targets of black cloth varying in size from 0.01 m2 to 1.0 m2. For both species, increasing the size of a square target from 0.01 m2 (dimensions = 0.1 x 0.1 m) to 1.0 m2 (1.0 x 1.0 m) increased the catch ,4x however the numbers of tsetse killed per unit area of target declined with target size suggesting that the most cost efficient targets are not the largest. For G. f. quanzensis, horizontal oblongs, (1 m wide x 0.5 m high) caught, 1.8x more tsetse than vertical ones (0.5 m wide x 1.0 m high) but the opposite applied for G. p. palpalis. Shape preference was consistent over the range of target sizes. For G. p. palpalis square targets caught as many tsetse as the oblong; while the evidence is less strong the same appears to apply to G. f. quanzensis. The results suggest that targets used to control G. p. palpalis and G. f. quanzensis should be square, and that the most cost-effective designs, as judged by the numbers of tsetse caught per area of target, are likely to be in the region of 0.25 x 0.25 m2. The preference of G. p. palpalis for vertical oblongs is unique amongst tsetse species, and it is suggested that this response might be related to its anthropophagic behaviour and hence importance as a vector of HAT

The 6-GHz multibeam maser survey III: comparison between the MMB and HOPS

We have compared the occurrence of 6.7-GHz and 12.2-GHz methanol masers with 22-GHz water masers and 6035-MHz excited-state OH masers in the 100 square degree region of the southern Galactic plane common to the Methanol Multibeam (MMB) and H2O southern Galactic Plane surveys (HOPS). We find the most populous star formation species to be 6.7-GHz methanol, followed by water, then 12.2-GHz and, finally, excited-state OH masers. We present association statistics, flux density (and luminosity where appropriate) and velocity range distributions across the largest, fully surveyed portion of the Galactic plane for four of the most common types of masers found in the vicinity of star formation regions. Comparison of the occurrence of the four maser types with far-infrared dust temperatures shows that sources exhibiting excited-state OH maser emission are warmer than sources showing any of the other three maser types. We further find that sources exhibiting both 6.7-GHz and 12.2-GHz methanol masers are warmer than sources exhibiting just 6.7-GHz methanol maser emission. These findings are consistent with previously made suggestions that both OH and 12.2-GHz methanol masers generally trace a later stage of star formation compared to other common maser types