3,061 research outputs found
Powder Bed Fusion Additive Manufacturing of JBK-75
JBK-75 is an iron-nickel derivative alloy of A-286 that has been of interest to NASAs propulsion community for use in fuel injectors and other components that are used in hot, corrosive environments. To enable the rapid production of these components in JBK-75, Marshall Space Flight Center has developed parameters for manufacturing fully dense JBK-75 components using powder bed fusion additive manufacturing (PBFAM). These parameters were developed in a two-step development. First, the depth of laser penetration in the powdered material was measured across a spectrum of laser powers to determine the optimal power necessary for generating the desired meltpool depth. The parameter sets vector-to-vector spacing was then then tailored to guarantee the full densification of the desired area. The results of this development was a readily implementable parameter that produced 99.6% dense material when using a 147W power running at 600mm/s with a 85m(32%) vector-to-vector spacing
Design and Fabrication Development of J-2X Engine Metallic Nozzle Extension
Maximized rocket engine performance is in part derived from expanding combustion gasses through the rocket nozzle. For upper stage engines the nozzles can be quite large. On the J-2X engine, an uncooled extension of a regeneratively cooled nozzle is used to expand the combustion gasses to a targeted exit pressure which is defined by an altitude for the desired maximum performance. Creating a J-2X nozzle extension capable of surviving the loads of test and flight environments while meeting engine system performance requirements required development of new processes and facilities. Meeting the challenges of the development resulted in concurrent J-2X nozzle extension design and fabrication. This paper describes how some of the design and fabrication challenges were resolved
Spin dynamics in p-doped semiconductor nanostructures subject to a magnetic field tilted from the Voigt geometry
We develop a theoretical description of the spin dynamics of resident holes
in a p-doped semiconductor quantum well (QW) subject to a magnetic field tilted
from the Voigt geometry. We find the expressions for the signals measured in
time-resolved Faraday rotation (TRFR) and resonant spin amplification (RSA)
experiments and study their behavior for a range of system parameters. We find
that an inversion of the RSA peaks can occur for long hole spin dephasing times
and tilted magnetic fields. We verify the validity of our theoretical findings
by performing a series of TRFR and RSA experiments on a p-modulation doped
GaAs/Al_{0.3}Ga_{0.7}As single QW and showing that our model can reproduce
experimentally observed signals.Comment: 9 pages, 3 figures; corrected typo
Studies of aging and HV break down problems during development and operation of MSGC and GEM detectors for the Inner Tracking System of HERA-B
The results of five years of development of the inner tracking system of the
HERA-B experiment and first experience from the data taking period of the year
2000 are reported. The system contains 184 chambers, covering a sensitive area
of about 20 * 20 cm2 each. The detector is based on microstrip gas counters
(MSGCs) with diamond like coated (DLC) glass wafers and gas electron
multipliers (GEMs). The main problems in the development phase were gas
discharges in intense hadron beams and aging in a high radiation dose
environment. The observation of gas discharges which damage the electrode
structure of the MSGC led to the addition of the GEM as a first amplification
step. Spurious sparking at the GEM cannot be avoided completely. It does not
affect the GEM itself but can produce secondary damage of the MSGC if the
electric field between the GEM and the MSGC is above a threshold depending on
operation conditions. We observed that aging does not only depend on the dose
but also on the spot size of the irradiated area. Ar-DME mixtures had to be
abandoned whereas a mixture of 70% Ar and 30% CO2 showed no serious aging
effects up to about 40 mC/cm deposited charge on the anodes. X-ray measurements
indicate that the DLC of the MSGC is deteriorated by the gas amplification
process. As a consequence, long term gain variations are expected. The Inner
Tracker has successfully participated in the data taking at HERA-B during
summer 2000.Comment: 29 pages, 22 figure
Ptychographic X-ray nanotomography quantifies mineral distributions in human dentine
Bones are bio-composites with biologically tunable mechanical properties,
where a polymer matrix of nanofibrillar collagen is reinforced by apatite
mineral crystals. Some bones, such as antler, form and change rapidly, while
other bone tissues, such as human tooth dentine, develop slowly and maintain
constant composition and architecture for entire lifetimes. When studying
apatite mineral microarchitecture, mineral distributions or mineralization
activity of bone-forming cells, representative samples of tissue are best
studied at submicrometre resolution while minimizing sample-preparation
damage. Here, we demonstrate the power of ptychographic X-ray tomography to
map variations in the mineral content distribution in three dimensions and at
the nanometre scale. Using this non-destructive method, we observe
nanostructures surrounding hollow tracts that exist in human dentine forming
dentinal tubules. We reveal unprecedented quantitative details of the
ultrastructure clearly revealing the spatially varying mineralization density.
Such information is essential for understanding a variety of natural and
therapeutic effects for example in bone tissue healing and ageing
Light Meson Dynamics Workshop. Mini proceedings
The mini-proceedings of the Light Meson Dynamics Workshop held in Mainz from
February 10th to 12th, 2014, are presented. The web page of the conference,
which contains all talks, can be found at
https://indico.cern.ch/event/287442/overview .Comment: 46 pages, 17 contributions. Editors: W. Gradl, P. Masjuan, M.
Ostrick, and S. Schere
Carbon-Carbon Nozzle Extension Development in Support of In-Space and Upper-Stage Liquid Rocket Engines
No abstract availabl
Issues and Opportunities in Exotic Hadrons
The last few years have been witness to a proliferation of new results
concerning heavy exotic hadrons. Experimentally, many new signals have been
discovered that could be pointing towards the existence of tetraquarks,
pentaquarks, and other exotic configurations of quarks and gluons.
Theoretically, advances in lattice field theory techniques place us at the cusp
of understanding complex coupled-channel phenomena, modelling grows more
sophisticated, and effective field theories are being applied to an ever
greater range of situations. It is thus an opportune time to evaluate the
status of the field. In the following, a series of high priority experimental
and theoretical issues concerning heavy exotic hadrons is presented.Comment: White paper from INT workshop, "Modern Exotic Hadrons". References
added. Version to appear in Chinese Physics
T and F asymmetries in π0 photoproduction on the proton
The γp→π0p reaction was studied at laboratory photon energies from 425 to 1445 MeV with a transversely polarized target and a longitudinally polarized beam. The beam-target asymmetry F was measured for the first time and new high precision data for the target asymmetry T were obtained. The experiment was performed at the photon tagging facility of the Mainz Microtron (MAMI) using the Crystal Ball and TAPS photon spectrometers. The polarized cross sections were expanded in terms of associated Legendre functions and compared to recent predictions from several partial-wave analyses. The impact of the new data on our understanding of the underlying partial-wave amplitudes and baryon resonance contributions is discussed
A new measurement of the neutron detection efficiency for the NaI Crystal Ball detector
We report on a measurement of the neutron detection efficiency in NaI
crystals in the Crystal Ball detector obtained from a study of single p0
photoproduction on deuterium using the tagged photon beam at the Mainz
Microtron. The results were obtained up to a neutron energy of 400 MeV. They
are compared to previous measurements made more than 15 years ago at the pion
beam at the BNL AGS
- …