Estimate of the theoretical uncertainty of the cross sections for nucleon knockout in neutral-current neutrino-oxygen interactions

Free nucleons propagating in water are known to produce gamma rays, which form a background to the searches for diffuse supernova neutrinos and sterile neutrinos carried out with Cherenkov detectors. As a consequence, the process of nucleon knockout induced by neutral-current quasielastic interactions of atmospheric (anti)neutrinos with oxygen needs to be under control at the quantitative level in the background simulations of the ongoing and future experiments. In this paper, we provide a quantitative assessment of the uncertainty associated with the theoretical description of the nuclear cross sections, estimating it from the discrepancies between the predictions of different models.Comment: 7 pages, 2 figure

Characterization of Carbon Fibers Recovered by Pyrolysis of Cured Prepregs and Their Reuse in New Composites

The applications of composite materials are rapidly growing. In the aeronautical sector, composites account for up to 50% of the weight of a modern typical commercial aircraft. However, the amount of composites currently recycled is less than 5% of the total amount produced. With environmental concerns becoming an increasingly influential topic, recyclability of composite materials is a key issue. Furthermore, several related European laws have been passed to minimize the environmental impact of composite structures and to make rational use of landfills. In this chapter, the authors analyze recycling techniques for carbon fiber composites with thermoset polymer matrix. The objective is to reuse the fibers in new, lower cost composites with similar properties. Starting from a pyrolysis step, followed by oxidation, an evaluation of the different parameters of the recycling process has been performed. The characterization of the fibers includes tensile tests, scanning electron microscopy, and Raman spectroscopy. The recycled fibers presented a reduction of their initial tensile strength lower than 10%. Then, remanufacturing of laminates using the recycled fibers was achieved by resin film infusion, obtaining laminates with properties similar to the brand-new composites. These results have the potential to be exploited by the automotive, aeronautical, wind energy, construction, and other sectors

Identification and functional analysis of novel phosphorylation sites in the RNA surveillance protein Upf1.

One third of inherited genetic diseases are caused by mRNAs harboring premature termination codons as a result of nonsense mutations. These aberrant mRNAs are degraded by the Nonsense-Mediated mRNA Decay (NMD) pathway. A central component of the NMD pathway is Upf1, an RNA-dependent ATPase and helicase. Upf1 is a known phosphorylated protein, but only portions of this large protein have been examined for phosphorylation sites and the functional relevance of its phosphorylation has not been elucidated in Saccharomyces cerevisiae. Using tandem mass spectrometry analyses, we report the identification of 11 putative phosphorylated sites in S. cerevisiae Upf1. Five of these phosphorylated residues are located within the ATPase and helicase domains and are conserved in higher eukaryotes, suggesting a biological significance for their phosphorylation. Indeed, functional analysis demonstrated that a small carboxy-terminal motif harboring at least three phosphorylated amino acids is important for three Upf1 functions: ATPase activity, NMD activity and the ability to promote translation termination efficiency. We provide evidence that two tyrosines within this phospho-motif (Y-738 and Y-742) act redundantly to promote ATP hydrolysis, NMD efficiency and translation termination fidelity

Exploiting graphic processing units parallelism to improve intelligent data acquisition system performance in JET's correlation reflectometer

The performance of intelligent data acquisition systems relies heavily on their processing capabilities and local bus bandwidth, especially in applications with high sample rates or high number of channels. This is the case of the self adaptive sampling rate data acquisition system installed as a pilot experiment in KG8B correlation reflectometer at JET. The system, which is based on the ITMS platform, continuously adapts the sample rate during the acquisition depending on the signal bandwidth. In order to do so it must transfer acquired data to a memory buffer in the host processor and run heavy computational algorithms for each data block. The processing capabilities of the host CPU and the bandwidth of the PXI bus limit the maximum sample rate that can be achieved, therefore limiting the maximum bandwidth of the phenomena that can be studied. Graphic processing units (GPU) are becoming an alternative for speeding up compute intensive kernels of scientific, imaging and simulation applications. However, integrating this technology into data acquisition systems is not a straight forward step, not to mention exploiting their parallelism efficiently. This paper discusses the use of GPUs with new high speed data bus interfaces to improve the performance of the self adaptive sampling rate data acquisition system installed on JET. Integration issues are discussed and performance evaluations are presente

RF-Energized Intracoronary Guidewire to Enhance Bipolar Ablation of the Interventricular Septum: In-silico Feasibility Study

"This is an Accepted Manuscript of an article published by Taylor & Francis in International Journal of Hyperthermiaon [date of publication], available online: https://doi.org/10.1080/02656736.2018.1425487"[EN] Purpose: Although bipolar radiofrequency (RF) ablation (RFA) is broadly used to eliminate ventricular tachycardias in the interventricular septum wall, it can fail to create transmural lesions in thick ventricular walls. To solve this problem, we explored whether an RF-energised guidewire inserted into the ventricular wall would enhance bipolar RFA in the creation of transmural lesions through the ventricular wall.Methods: We built three-dimensional computational models including two irrigated electrodes placed on opposing sides of the interventricular septum and a metal guidewire inserted into the septum. Computer simulations were conducted to compare the temperature distributions obtained with two ablation modes: bipolar mode (RF power delivered between both irrigated electrode) and time-division multiplexing (TDM) technique, which consists of activating the bipolar mode for 90% of the time and applying RF power between the guidewire and both irrigated electrodes during the remaining time.Results: The TDM technique was the most suitable in terms of creating wider lesions through the entire ventricular wall, avoiding the hour-glass shape of thermal lesions associated with the bipolar mode. This was especially apparent in the case of thick walls (15mm). Furthermore, the TDM technique was able to create transmural lesions even when the guidewire was displaced from the midplane of the wall.Conclusions: An RF-energised guidewire could enhance bipolar RFA by allowing transmural lesions to be made through thick ventricular walls. However, the safety of this new approach must be assessed in future pre-clinical studies, especially in terms of the risk of stenosis and its clinical impact.This work was supported by the Spanish Ministerio de Economia, Industria y Competitividad under "Plan Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad" Grant "TEC2014-52383-C3 (TEC2014-52383-C3-1-R)". A. Gonzalez-Suarez has a "Juan de la Cierva-formacion" Postdoctoral Grant (FJCI-2015-27202) supported by the Spanish Ministerio de Economia, Industria y Competitividad, Secretaria de Estado de Investigacion, Desarrollo e Innovacion.Pérez, JJ.; González Suárez, A.; D Avila, A.; Berjano, E. (2018). RF-Energized Intracoronary Guidewire to Enhance Bipolar Ablation of the Interventricular Septum: In-silico Feasibility Study. International Journal of Hyperthermia. 34(8):1202-1212. https://doi.org/10.1080/02656736.2018.1425487S12021212348Baszko, A., Telec, W., Kałmucki, P., Iwachów, P., Kochman, K., Szymański, R., … Siminiak, T. (2016). Bipolar irrigated radiofrequency ablation of resistant ventricular tachycardia with a septal intramural origin: the initial experience and a description of the method. Clinical Case Reports, 4(10), 957-961. doi:10.1002/ccr3.648Gizurarson, S., Spears, D., Sivagangabalan, G., Farid, T., Ha, A. C. T., Masse, S., … Nanthakumar, K. (2014). Bipolar ablation for deep intra-myocardial circuits: human ex vivo development and in vivo experience. Europace, 16(11), 1684-1688. doi:10.1093/europace/euu001Koruth, J. S., Dukkipati, S., Miller, M. A., Neuzil, P., d’ Avila, A., & Reddy, V. Y. (2012). Bipolar irrigated radiofrequency ablation: A therapeutic option for refractory intramural atrial and ventricular tachycardia circuits. Heart Rhythm, 9(12), 1932-1941. doi:10.1016/j.hrthm.2012.08.001Baldinger, S. H., Kumar, S., Barbhaiya, C. R., Mahida, S., Epstein, L. M., Michaud, G. F., … Stevenson, W. G. (2015). Epicardial Radiofrequency Ablation Failure During Ablation Procedures for Ventricular Arrhythmias. Circulation: Arrhythmia and Electrophysiology, 8(6), 1422-1432. doi:10.1161/circep.115.003202Santangeli, P., Shaw, G. C., & Marchlinski, F. E. (2017). Radiofrequency Wire Facilitated Interventricular Septal Access for Catheter Ablation of Ventricular Tachycardia in a Patient With Aortic and Mitral Mechanical Valves. Circulation: Arrhythmia and Electrophysiology, 10(1). doi:10.1161/circep.116.004771Berjano, E. J., Hornero, F., Atienza, F., & Montero, A. (2003). Long electrodes for radio frequency ablation: comparative study of surface versus intramural application. Medical Engineering & Physics, 25(10), 869-877. doi:10.1016/s1350-4533(03)00125-5McLELLAN, A. J. A., ELLIMS, A. H., PRABHU, S., VOSKOBOINIK, A., ILES, L. M., HARE, J. L., … KISTLER, P. M. (2016). Diffuse Ventricular Fibrosis on Cardiac Magnetic Resonance Imaging Associates With Ventricular Tachycardia in Patients With Hypertrophic Cardiomyopathy. Journal of Cardiovascular Electrophysiology, 27(5), 571-580. doi:10.1111/jce.12948Berjano, E. J. (2006). Theoretical modeling for radiofrequency ablation: state-of-the-art and challenges for the future. BioMedical Engineering OnLine, 5(1). doi:10.1186/1475-925x-5-24Pérez, J. J., González-Suárez, A., & Berjano, E. (2017). Numerical analysis of thermal impact of intramyocardial capillary blood flow during radiofrequency cardiac ablation. International Journal of Hyperthermia, 34(3), 243-249. doi:10.1080/02656736.2017.1336258Labonte, S. (1994). Numerical model for radio-frequency ablation of the endocardium and its experimental validation. IEEE Transactions on Biomedical Engineering, 41(2), 108-115. doi:10.1109/10.284921Doss, J. D. (1982). Calculation of electric fields in conductive media. Medical Physics, 9(4), 566-573. doi:10.1118/1.595107PÉREZ, J. J., D’AVILA, A., ARYANA, A., & BERJANO, E. (2015). Electrical and Thermal Effects of Esophageal Temperature Probes on Radiofrequency Catheter Ablation of Atrial Fibrillation: Results from a Computational Modeling Study. Journal of Cardiovascular Electrophysiology, 26(5), 556-564. doi:10.1111/jce.12630Jo, B., & Aksan, A. (2010). Prediction of the extent of thermal damage in the cornea during conductive keratoplasty. Journal of Thermal Biology, 35(4), 167-174. doi:10.1016/j.jtherbio.2010.02.004Gonzalez-Suarez, A., & Berjano, E. (2016). Comparative Analysis of Different Methods of Modeling the Thermal Effect of Circulating Blood Flow During RF Cardiac Ablation. IEEE Transactions on Biomedical Engineering, 63(2), 250-259. doi:10.1109/tbme.2015.2451178WINTERFIELD, J. R., JENSEN, J., GILBERT, T., MARCHLINSKI, F., NATALE, A., PACKER, D., … WILBER, D. J. (2015). Lesion Size and Safety Comparison Between the Novel Flex Tip on the FlexAbility Ablation Catheter and the Solid Tips on the ThermoCool and ThermoCool SF Ablation Catheters. Journal of Cardiovascular Electrophysiology, 27(1), 102-109. doi:10.1111/jce.12835PÉREZ, J. J., D’AVILA, A., ARYANA, A., TRUJILLO, M., & BERJANO, E. (2016). Can Fat Deposition After Myocardial Infarction Alter the Performance of RF Catheter Ablation of Scar-Related Ventricular Tachycardia?: Results from a Computer Modeling Study. Journal of Cardiovascular Electrophysiology, 27(8), 947-952. doi:10.1111/jce.13006Haines, D. E. (2011). Letter by Haines Regarding Article, «Direct Measurement of the Lethal Isotherm for Radiofrequency Ablation of Myocardial Tissue». Circulation: Arrhythmia and Electrophysiology, 4(5). doi:10.1161/circep.111.965459González-Suárez, A., Trujillo, M., Koruth, J., d’ Avila, A., & Berjano, E. (2014). Radiofrequency cardiac ablation with catheters placed on opposing sides of the ventricular wall: Computer modelling comparing bipolar and unipolar modes. International Journal of Hyperthermia, 30(6), 372-384. doi:10.3109/02656736.2014.949878Gianni, C., Mohanty, S., Trivedi, C., Di Biase, L., Al-Ahmad, A., Natale, A., & David Burkhardt, J. (2017). Alternative Approaches for Ablation of Resistant Ventricular Tachycardia. Cardiac Electrophysiology Clinics, 9(1), 93-98. doi:10.1016/j.ccep.2016.10.006Boll, D. T., Lewin, J. S., Duerk, J. L., & Merkle, E. M. (2003). Do Surgical Clips Interfere with Radiofrequency Thermal Ablation? American Journal of Roentgenology, 180(6), 1557-1560. doi:10.2214/ajr.180.6.1801557Eung Je Woo, Tungjitkusolmun, S., Hong Cao, Jang-Zem Tsai, Webster, J. G., Vorperian, V. R., & Will, J. A. (2000). A new catheter design using needle electrode for subendocardial RF ablation of ventricular muscles: finite element analysis and in vitro experiments. IEEE Transactions on Biomedical Engineering, 47(1), 23-31. doi:10.1109/10.817616BLOUIN, L. T., & MARCUS, F. I. (1989). The Effect of Electrode Design on the Efficiency of Delivery of Radiofrequency Energy to Cardiac Tissue In Vitro. Pacing and Clinical Electrophysiology, 12(1), 136-143. doi:10.1111/j.1540-8159.1989.tb02640.xTao, W., Jian-ping, G., Xu, H., Wen-sheng, L., Liang, C., Guo-ping, C., … Jin-hua, S. (2013). The effects of endovenous radiofrequency ablation on coagulation and the vein wall in an experimental canine model. Vascular, 21(4), 215-219. doi:10.1177/1708538113478762Badham, G. E., Strong, S. M., & Whiteley, M. S. (2014). An in vitro study to optimise treatment of varicose veins with radiofrequency-induced thermo therapy. Phlebology: The Journal of Venous Disease, 30(1), 17-23. doi:10.1177/0268355514552005Kreidieh, B., Rodríguez-Mañero, M., A. Schurmann, P., Ibarra-Cortez, S. H., Dave, A. S., & Valderrábano, M. (2016). Retrograde Coronary Venous Ethanol Infusion for Ablation of Refractory Ventricular Tachycardia. Circulation: Arrhythmia and Electrophysiology, 9(7). doi:10.1161/circep.116.00435

The orientation of lugdunum conuenarum and the celtic feasts marking the start of the seasons in ancient gaul

There is a long-lasting debate, started in the nineteenth century by d‟Arbois de Jubainville and Jullian, among others, regarding the pan-Celtic nature of the mid-season (or rather, start of season) feasts known from the Mediaeval Ireland (set on 1st November, February, May and August). D‟Arbois indicated that one of these feasts coincided with the festival celebrated during Roman times at Lugdunum (Lyon) on August 1st from 12 BC onwards. We recently verified that the orientation of the earlier parts of this Roman colony were laid out facing the sunrise on this date since its foundation in 43 BC, prior to any possible link with Augustus. This fact prompted us to investigate the orientation of other Roman cities in Gaul, particularly those named Lugdunum which still contain Roman buildings capable of being measured. The most complex of these is Lugdunum Conuerarum (present-day Saint-Bertrand-de-Comminges). With a Celtic name and mixed Aquitaine-Latin culture, it is oriented towards the sunrise on February 1st. Other cities in Gaul and Hispania have also been considered, which have similar orientations. We therefore verify the pan-Celtic character of the mid-season feasts. Finally, we present the hypothesis that the conversion of these feasts from a luni-solar calendar to the solar Julian calendar took place in the centre of Gaul at some time between the reigns of Caesar and Augustus. At a later stage, this model would be exported by early Christianity into Ireland, then serving as an interpretative inspiration for scholars such as d‟Arbois de Jubainville and othersS

Methodology for the innovation of business games

El presente artículo explica las acciones llevadas a cabo por una compañía dedicada al diseño e implementación de experiencias educativas utilizando simuladores de negocios, como parte del proceso de actualización de su portafolio. Este proceso consta de una metodología con ocho etapas que han sido implementadas para incorporar la sostenibilidad como aspecto relevante en la narrativa de un simulador y en consecuencia, en la toma de decisiones y la evaluación de competencias a partir de ellas. El objetivo principal de la metodología es la alineación de los simuladores a tendencias de negocios para desarrollar competencias relevantes y demandadas por las organizaciones. Los resultados obtenidos a partir de la implementación de la metodología han permitido una planificación del despliegue de la misma, utilizando los retos identificados para la innovación del portafolio de la compañía, de cara a las instituciones educativas que incluyen simuladores de negocios como parte de su propuesta de valor.The present paper explains the phases of an update process performed by a company which focuses on designing and implementing educational experiences using business games. The methodology for this process consists of eight phases that have been implemented to incorporate sustainability as a relevant aspect in the narrative of one of the simulators and, consequently, in decision-making and evaluation of competencies based on them. The main goal of this process is to align the portfolio to the latest business trends in order to develop relevant skills demanded by organizations. The results obtained from this implementation have been useful for planning its development using other relevant challenges, contemplating other products of the portfolio

SCORE and REGICOR function charts underestimate the cardiovascular risk in Spanish patients with rheumatoid arthritis

Introduction: Our objective was to determine which one of the two function charts available in Spain to calculate cardiovascular (CV) risk, Systematic COronary Risk Evaluation (SCORE) or Framingham-REgistre GIroní del COR (REGICOR), should be used in patients with rheumatoid arthritis (RA). Methods: A series of RA patients seen over a one-year period without history of CV events were assessed. SCORE, REGICOR, modified (m)SCORE and mREGICOR according to the European League Against Rheumatism (EULAR) recommendations were applied. Carotid ultrasonography (US) was performed. Carotid intima-media thickness (cIMT) > 0.90 mm and/or carotid plaques were used as the gold standard test for severe subclinical atherosclerosis and high CV risk (US+). The area under the receiver operating curves (AUC) for the predicted risk for mSCORE and mREGICOR were calculated according to the presence of severe carotid US findings (US+). Results: We included 370 patients (80% women; mean age 58.9 ± 13.7 years); 36% had disease duration of 10 years or more; rheumatoid factor (RF) and/or anticyclic citrullinated peptide (anti-CCP) were positive in 68%; and 17% had extra-articular manifestations. The EULAR multiplier factor was used in 122 (33%) of the patients. The mSCORE was 2.16 ± 2.49% and the mREGICOR 4.36 ± 3.46%. Regarding US results, 196 (53%) patients were US+. The AUC mSCORE was 0.798 (CI 95%: 0.752 to 0.844) and AUC mREGICOR 0.741 (95% CI; 0.691 to 0.792). However, mSCORE and mREGICOR failed to identify 88% and 91% of US+ patients. More than 50% of patients with mSCORE ≥1% or mREGICOR >1% were US+. Conclusions: Neither of these two function charts was useful in estimating CV risk in Spanish RA patients

Evaluation of phenol detoxification by Brassica napus hairy roots, using Allium cepa test

Introduction: Meristematic mitotic cells of Allium cepa constitute an adequate material for cytotoxicity and genotoxicity evaluation of environmental pollutants, such as phenol, which is a contaminant frequently found in several industrial effluents. Results and discussion: In the present work, Brassica napus hairy roots (HR) were used for phenol removal assays. The toxicity of post-removal solutions (PRS) and phenol solutions was analyzed. These HR removed the contaminant with high efficiency (100-80% for phenol solutions containing 10-250 mg/L, respectively). Phenol solutions treated with B. napus HR showed a significant reduction of general toxicity compared to untreated phenol solutions, since the IC50 values were 318. 39 and 229. 02 mg/L, respectively. Moreover, PRS presented lower cytotoxicity and genotoxicity than that found in phenol solutions untreated. The mitotic index (MI) observed in meristematic cells treated with PRS (100 and 250 mg/L of phenol) showed an increase of 35% and 42%, whereas the chromosome aberrations showed a significant decrease. According to these results, B. napus HR cultures could be used for the treatment of solutions contaminated with phenol, since we observed not only high removal efficiency, but also an important reduction of the general toxicity, cytotoxicity, and genotoxicity.Fil: González, Paola Solange. Universidad Nacional de Río Cuarto; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; ArgentinaFil: Maglione, Guillermo A.. Universidad Nacional de Río Cuarto; ArgentinaFil: Giordana, Micaela. Universidad Nacional de Río Cuarto; ArgentinaFil: Paisio, Cintia Elizabeth. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Nacional de Río Cuarto; ArgentinaFil: Talano, Melina Andrea. Universidad Nacional de Río Cuarto; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; ArgentinaFil: Agostini, Elizabeth. Universidad Nacional de Río Cuarto; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentin