Simulation of Platelet, Thrombus and Erythrocyte Hydrodynamic Interactions in a 3D Arteriole with In Vivo Comparison

Cylindrical blood vessels, ellipsoid platelets and biconcave-shaped deformable erythrocytes (RBCs) are important participants in hemostasis and thrombosis. However, due to the challenge of combining these components in simulation tools, few simulation studies have included all of them in realistic three-dimensional models. In the present study, we apply a recently developed simulation model to incorporate these components and analyze the flow in a thrombotic tubular arteriole, particularly the detailed hydrodynamic interactions between the thrombus shape, RBCs and platelets. It was found that at certain azimuth positions, the velocity drops in the proximity of both the upstream and downstream edge of the thrombus, which is accompanied by a rapid velocity increase in the narrowed region. The RBCs alter the flow profiles significantly from the typical low Reynolds (Re) number flow, and also enhance the deposition of free flowing platelets onto the thrombus. By evaluating the platelet-thrombus interaction and platelet-RBC interaction together, several mechanisms of platelet deposition augmentation are identified. With in vivo data comparison, our model illustrates the potential of future thrombosis studies that incorporate detailed receptor-ligand adhesion modules

Test-retest and between-site reliability in a multicenter fMRI study

In the present report, estimates of test–retest and between-site reliability of fMRI assessments were produced in the context of a multicenter fMRI reliability study (FBIRN Phase 1, www.nbirn.net). Five subjects were scanned on 10 MRI scanners on two occasions. The fMRI task was a simple block design sensorimotor task. The impulse response functions to the stimulation block were derived using an FIR-deconvolution analysis with FMRISTAT. Six functionally-derived ROIs covering the visual, auditory and motor cortices, created from a prior analysis, were used. Two dependent variables were compared: percent signal change and contrast-to-noise-ratio. Reliability was assessed with intraclass correlation coefficients derived from a variance components analysis. Test–retest reliability was high, but initially, between-site reliability was low, indicating a strong contribution from site and site-by-subject variance. However, a number of factors that can markedly improve between-site reliability were uncovered, including increasing the size of the ROIs, adjusting for smoothness differences, and inclusion of additional runs. By employing multiple steps, between-site reliability for 3T scanners was increased by 123%. Dropping one site at a time and assessing reliability can be a useful method of assessing the sensitivity of the results to particular sites. These findings should provide guidance to others on the best practices for future multicenter studies

First measurement of the C P -violating phase in B s 0 → J / ψ ( → e + e - ) ϕ decays

Abstract: A flavour-tagged time-dependent angular analysis of Bs0→J/ψϕ decays is presented where the J/ψ meson is reconstructed through its decay to an e+e- pair. The analysis uses a sample of pp collision data recorded with the LHCb experiment at centre-of-mass energies of 7 and 8\,Te V, corresponding to an integrated luminosity of 3\,fb-1. The CP-violating phase and lifetime parameters of the Bs0 system are measured to be ϕs=0.00±0.28±0.07\,rad, ΔΓs=0.115±0.045±0.011\,ps-1 and Γs=0.608±0.018±0.012\,ps-1 where the first uncertainty is statistical and the second systematic. This is the first time that CP-violating parameters are measured in the Bs0→J/ψϕ decay with an e+e- pair in the final state. The results are consistent with previous measurements in other channels and with the Standard Model predictions

Search for the doubly charmed baryon Ω cc +

Abstract: A search for the doubly charmed baryon Ωcc+ with the decay mode Ωcc+ → Ξc+K−π+ is performed using proton-proton collision data at a centre-of-mass energy of 13 TeV collected by the LHCb experiment from 2016 to 2018, corresponding to an integrated luminosity of 5.4 fb−1. No significant signal is observed within the invariant mass range of 3.6 to 4.0GeV/c2. Upper limits are set on the ratio R of the production cross-section times the total branching fraction of the Ωcc+ → Ξc+K−π+ decay with respect to the Ξcc++→Λc+K−π+π+ decay. Upper limits at 95% credibility level for R in the range 0.005 to 0.11 are obtained for different hypotheses on the Ωcc+ mass and lifetime in the rapidity range from 2.0 to 4.5 and transverse momentum range from 4 to 15 GeV/c

Study of the lineshape of the chi(c1) (3872) state

A study of the lineshape of the chi(c1) (3872) state is made using a data sample corresponding to an integrated luminosity of 3 fb(-1) collected in pp collisions at center-of-mass energies of 7 and 8 TeV with the LHCb detector. Candidate chi(c1)(3872) and psi(2S) mesons from b-hadron decays are selected in the J/psi pi(+)pi(-) decay mode. Describing the lineshape with a Breit-Wigner function, the mass splitting between the chi(c1 )(3872) and psi(2S) states, Delta m, and the width of the chi(c1 )(3872) state, Gamma(Bw), are determined to be (Delta m=185.598 +/- 0.067 +/- 0.068 Mev,)(Gamma BW=1.39 +/- 0.24 +/- 0.10 Mev,) where the first uncertainty is statistical and the second systematic. Using a Flatte-inspired model, the mode and full width at half maximum of the lineshape are determined to be (mode=3871.69+0.00+0.05 MeV.)(FWHM=0.22-0.04+0.13+0.07+0.11-0.06-0.13 MeV, ) An investigation of the analytic structure of the Flatte amplitude reveals a pole structure, which is compatible with a quasibound D-0(D) over bar*(0) state but a quasivirtual state is still allowed at the level of 2 standard deviations

Measurement of CP asymmetries and branching fraction ratios of B− decays to two charm mesons

The $CP$ asymmetries of seven $B^-$ decays to two charm mesons are measured using data corresponding to an integrated luminosity of $9\text{fb}^{-1}$ of proton-proton collisions collected by the LHCb experiment. Decays involving a $D^{*0}$ or $D^{*-}_s$ meson are analysed by reconstructing only the $D^0$ or $D^-_s$ decay products. This paper presents the first measurement of $\mathcal{A}^{CP}(B^- \rightarrow D^{*-}_s D^0)$ and $\mathcal{A}^{CP}(B^- \rightarrow D^{-}_s D^{*0})$, and the most precise measurement of the other five $CP$ asymmetries. There is no evidence of $CP$ violation in any of the analysed decays. Additionally, two ratios between branching fractions of selected decays are measured.The CP asymmetries of seven B$^{−}$ decays to two charm mesons are measured using data corresponding to an integrated luminosity of 9 fb$^{−1}$ of proton-proton collisions collected by the LHCb experiment. Decays involving a D$^{*0}$ or ${D}_s^{\ast -}$ meson are analysed by reconstructing only the D$^{0}$ or ${D}_s^{-}$ decay products. This paper presents the first measurement of $\mathcal{A} ^{CP}$(B$^{−}$→${D}_s^{\ast -}$D$^{0}$) and $\mathcal{A} ^{CP}$(B$^{−}$→${D}_s^{-}$D$^{∗0}$), and the most precise measurement of the other five CP asymmetries. There is no evidence of CP violation in any of the analysed decays. Additionally, two ratios between branching fractions of selected decays are measured.[graphic not available: see fulltext]The $CP$ asymmetries of seven $B^-$ decays to two charm mesons are measured using data corresponding to an integrated luminosity of $9\text{ fb}^{-1}$ of proton-proton collisions collected by the LHCb experiment. Decays involving a $D^{*0}$ or $D^{*-}_s$ meson are analysed by reconstructing only the $D^0$ or $D^-_s$ decay products. This paper presents the first measurement of $\mathcal{A}^{CP}(B^- \rightarrow D^{*-}_s D^0)$ and $\mathcal{A}^{CP}(B^- \rightarrow D^{-}_s D^{*0})$, and the most precise measurement of the other five $CP$ asymmetries. There is no evidence of $CP$ violation in any of the analysed decays. Additionally, two ratios between branching fractions of selected decays are measured

Measurement of the CKM angle γγ in B±→DK±B^\pm\to D K^\pm and B±→Dπ±B^\pm \to D π^\pm decays with D→KS0h+h−D \to K_\mathrm S^0 h^+ h^-

A measurement of $CP$-violating observables is performed using the decays $B^\pm\to D K^\pm$ and $B^\pm\to D \pi^\pm$, where the $D$ meson is reconstructed in one of the self-conjugate three-body final states $K_{\mathrm S}\pi^+\pi^-$ and $K_{\mathrm S}K^+K^-$ (commonly denoted $K_{\mathrm S} h^+h^-$). The decays are analysed in bins of the $D$-decay phase space, leading to a measurement that is independent of the modelling of the $D$-decay amplitude. The observables are interpreted in terms of the CKM angle $\gamma$. Using a data sample corresponding to an integrated luminosity of $9\,\text{fb}^{-1}$ collected in proton-proton collisions at centre-of-mass energies of $7$, $8$, and $13\,\text{TeV}$ with the LHCb experiment, $\gamma$ is measured to be $\left(68.7^{+5.2}_{-5.1}\right)^\circ$. The hadronic parameters $r_B^{DK}$, $r_B^{D\pi}$, $\delta_B^{DK}$, and $\delta_B^{D\pi}$, which are the ratios and strong-phase differences of the suppressed and favoured $B^\pm$ decays, are also reported

Hydraulic Flushing of Sediment in Reservoirs: Best Practices of Numerical Modeling

This article provides a comprehensive review and best practices for numerically simulating hydraulic flushing for reservoir sediment management. Three sediment flushing types are discussed: drawdown flushing, pressure flushing, and turbidity current venting. The need for reservoir sediment management and the current practices are reviewed. Different hydraulic drawdown types are described in terms of the basic physical processes involved as well as the empirical/analytical assessment tools that may be used. The primary focus has been on the numerical modeling of various hydraulic flushing options. Three model categories are reviewed: one-dimensional (1D), two-dimensional (2D) depth-averaged or layer-averaged, and three-dimensional (3D) computational fluid dynamics (CFD) models. General guidelines are provided on how to select a proper model given the characteristics of the reservoir and the flushing method, as well as specific guidelines for modeling. Case studies are also presented to illustrate the guidelines