156 research outputs found

    Characterization of the HD 108236 system with CHEOPS and TESS Confirmation of a fifth transiting planet

    Get PDF
    Context. The HD 108236 system was first announced with the detection of four small planets based on TESS data. Shortly after, the transit of an additional planet with a period of 29.54 d was serendipitously detected by CHEOPS. In this way, HD 108236 (V = 9.2) became one of the brightest stars known to host five small transiting planets (Rp < 3 R⊕). Aims. We characterize the planetary system by using all the data available from CHEOPS and TESS space missions. We use the flexible pointing capabilities of CHEOPS to follow up the transits of all the planets in the system, including the fifth transiting body. Methods. After updating the host star parameters by using the results from Gaia eDR3, we analyzed 16 and 43 transits observed by CHEOPS and TESS, respectively, to derive the planets’ physical and orbital parameters. We carried out a timing analysis of the transits of each of the planets of HD 108236 to search for the presence of transit timing variations. Results. We derived improved values for the radius and mass of the host star (R★ = 0.876 ± 0.007 R0 and M★ = 0.867-0.046+0.047M⊙). We confirm the presence of the fifth transiting planet f in a 29.54 d orbit. Thus, the HD 108236 system consists of five planets of Rb = 1.587±0.028, Rc = 2.122±0.025, Rd = 2.629 ± 0.031, Re = 3.008 ± 0.032, and Rf = 1.89 ± 0.04 [R⊕]. We refine the transit ephemeris for each planet and find no significant transit timing variations for planets c, d, and e. For planets b and f, instead, we measure significant deviations on their transit times (up to 22 and 28 min, respectively) with a non-negligible dispersion of 9.6 and 12.6 min in their time residuals. Conclusions. We confirm the presence of planet f and find no significant evidence for a potential transiting planet in a 10.9 d orbital period, as previously suggested. Further monitoring of the transits, particularly for planets b and f, would confirm the presence of the observed transit time variations. HD 108236 thus becomes a key multi-planetary system for the study of formation and evolution processes. The reported precise results on the planetary radii – together with a profuse RV monitoring – will allow for an accurate characterization of the internal structure of these planets

    The tidal deformation and atmosphere of WASP-12 b from its phase curve

    Get PDF
    Context. Ultra-hot Jupiters present a unique opportunity to understand the physics and chemistry of planets, their atmospheres, and interiors at extreme conditions. WASP-12 b stands out as an archetype of this class of exoplanets, with a close-in orbit around its star that results in intense stellar irradiation and tidal effects. Aims. The goals are to measure the planet’s tidal deformation, atmospheric properties, and also to refine its orbital decay rate. Methods. We performed comprehensive analyses of the transits, occultations, and phase curves of WASP-12b by combining new CHEOPS observations with previous TESS and Spitzer data. The planet was modeled as a triaxial ellipsoid parameterized by the second-order fluid Love number of the planet, h2, which quantifies its radial deformation and provides insight into the interior structure. Results. We measured the tidal deformation of WASP-12b and estimated a Love number of h2 = 1.55−0.49+0.45 (at 3.2σ) from its phase curve. We measured occultation depths of 333 ± 24 ppm and 493 ± 29 ppm in the CHEOPS and TESS bands, respectively, while the nightside fluxes are consistent with zero, and also marginal eastward phase offsets. Our modeling of the dayside emission spectrum indicates that CHEOPS and TESS probe similar pressure levels in the atmosphere at a temperature of ~2900 K. We also estimated low geometric albedos of Ag = 0.086 ± 0.017 and Ag = 0.01 ± 0.023 in the CHEOPS and TESS passbands, respectively, suggesting the absence of reflective clouds in the high-temperature dayside of the planet. The CHEOPS occultations do not show strong evidence for variability in the dayside atmosphere of the planet at the median occultation depth precision of 120 ppm attained. Finally, combining the new CHEOPS timings with previous measurements refines the precision of the orbital decay rate by 12% to a value of −30.23 ± 0.82 ms yr−1, resulting in a modified stellar tidal quality factor of Q′★ = 1.70 ± 0.14 × 105. Conclusions. WASP-12 b becomes the second exoplanet, after WASP-103b, for which the Love number has been measured from the effect of tidal deformation in the light curve. However, constraining the core mass fraction of the planet requires measuring h2 with a higher precision. This can be achieved with high signal-to-noise observations with JWST since the phase curve amplitude, and consequently the induced tidal deformation effect, is higher in the infrared

    A multi-wavelength census of star formation activity in the young embedded cluster around Serpens/G3-G6

    Get PDF
    Aims. The aim of this paper is to characterise the star formation activity in the poorly studied embedded cluster Serpens/G3-G6, located ~ 45' (3 pc) to the south of the Serpens Cloud Core, and to determine the luminosity and mass functions of its population of Young Stellar Objects (YSOs). Methods. Multi-wavelength broadband photometry was obtained to sample the near and mid-IR spectral energy distributions to separate YSOs from field stars and classify the YSO evolutionary stage. ISOCAM mapping in the two filters LW2 (5-8.5 um) and LW3 (12-18 um) of a 19' x 16' field was combined with JHKs data from 2MASS, Ks data from Arnica/NOT, and L' data from SIRCA/NOT. Continuum emission at 1.3 mm (IRAM) and 3.6 cm (VLA) was mapped to study the cloud structure and the coldest/youngest sources. Deep narrow band imaging at the 2.12 um S(1) line of H2 from NOTCam/NOT was obtained to search for signs of bipolar outflows. Results. We have strong evidence for a stellar population of 31 Class II sources, 5 flat-spectrum sources, 5 Class I sources, and two Class 0 sources. Our method does not sample the Class III sources. The cloud is composed of two main dense clumps aligned along a ridge over ~ 0.5 pc plus a starless core coinciding with absorption features seen in the ISOCAM maps. We find two S-shaped bipolar collimated flows embedded in the NE clump, and propose the two driving sources to be a Class 0 candidate (MMS3) and a double Class I (MMS2). For the Class II population we find a best age of ~ 2 Myr and compatibility with recent Initial Mass Functions (IMFs) by comparing the observed Class II luminosity function (LF), which is complete to 0.08 L_sun, to various model LFs with different star formation scenarios and input IMFs.Comment: 18 pages, 16 figures, 3 online tables, accepted by A&

    Examining the orbital decay targets KELT-9 b, KELT-16 b, and WASP-4b, and the transit-timing variations of HD 97658 b

    Get PDF
    Context. Tidal orbital decay is suspected to occur for hot Jupiters in particular, with the only observationally confirmed case of this being WASP-12b. By examining this effect, information on the properties of the host star can be obtained using the so-called stellar modified tidal quality factor Q*′, which describes the efficiency with which the kinetic energy of the planet is dissipated within the star. This can provide information about the interior of the star. Aims. In this study, we aim to improve constraints on the tidal decay of the KELT-9, KELT-16, and WASP-4 systems in order to find evidence for or against the presence of tidal orbital decay. With this, we want to constrain the Q*′ value for each star. In addition, we aim to test the existence of the transit timing variations (TTVs) in the HD 97658 system, which previously favoured a quadratic trend with increasing orbital period. Methods. Making use of newly acquired photometric observations from CHEOPS (CHaracterising ExOplanet Satellite) and TESS (Transiting Exoplanet Survey Satellite), combined with archival transit and occultation data, we use Markov chain Monte Carlo (MCMC) algorithms to fit three models to the data, namely a constant-period model, an orbital-decay model, and an apsidal-precession model. Results. We find that the KELT-9 system is best described by an apsidal-precession model for now, with an orbital decay trend at over 2 σ being a possible solution as well. A Keplerian orbit model with a constant orbital period provides the best fit to the transit timings of KELT-16 b because of the scatter and scale of their error bars. The WASP-4 system is best represented by an orbital decay model at a 5 σ significance, although apsidal precession cannot be ruled out with the present data. For HD 97658 b, using recently acquired transit observations, we find no conclusive evidence for a previously suspected strong quadratic trend in the data

    The EBLM project – VIII. First results for M-dwarf mass, radius, and effective temperature measurements using CHEOPS light curves

    Get PDF
    The accuracy of theoretical mass, radius, and effective temperature values for M-dwarf stars is an active topic of debate. Differences between observed and theoretical values have raised the possibility that current theoretical stellar structure and evolution models are inaccurate towards the low-mass end of the main sequence. To explore this issue, we use the CHEOPS satellite to obtain high-precision light curves of eclipsing binaries with low-mass stellar companions. We use these light curves combined with the spectroscopic orbit for the solar-type companion to measure the mass, radius, and effective temperature of the M-dwarf star. Here, we present the analysis of three eclipsing binaries. We use the pycheops data analysis software to fit the observed transit and eclipse events of each system. Two of our systems were also observed by the TESS satellite – we similarly analyse these light curves for comparison. We find consistent results between CHEOPS and TESS, presenting three stellar radii and two stellar effective temperature values of low-mass stellar objects. These initial results from our on-going observing programme with CHEOPS show that we can expect to have ∼24 new mass, radius, and effective temperature measurements for very low-mass stars within the next few years

    Polarimetric coronagraphy of BD+31643

    Full text link
    Context. The binary B5V star BD+31?643 exhibits a disk-like structure detected at optical wavelengths. Even though the feature is well centered on the star, it has been argued, based on Spitzer observations, that the feature is a filament not directly associated to the binary star. Aims. The purpose of the present paper is to investigate whether polarization imaging may provide evidence either for or against the disk hypothesis. In addition, we aim at clarifying whether there might be any additional close companion to the binary star. Methods. We used the coronagraph PolCor in its polarization mode in combination with an EMCCD camera allowing short unit exposure times. As a result of shift-and-add and frame selection, the spatial resolution is improved compared to traditional CCD imaging. In order to possibly reveal an additional stellar companion, we used high resolution spectroscopy in the optical and high spatial resolution imaging in the near-IR. Results. The disk/filament is much better seen in polarization; it is narrow and a line drawn along the ridge passes within a second of arc from the star. The degree of polarization is high (?50% after correction for the extended component of the reflection nebula) which means that the disk/filament must be approximately at the same distance as the star. Although we confirm that the feature is much brighter south-east than north-west of the star, the evidence that the feature is physically connected to the star is strengthened and suggests that we are witnessing the destruction process of an accretion disk. Our spectroscopy shows that at least one of the stars is a spectroscopic binary. We were, however, not able to spatially resolve any stellar component in addition to the two well separated stars.Comment: 9 pages, 19 figure

    CHEOPS in-flight performance: A comprehensive look at the first 3.5 yr of operations

    Get PDF
    Context. Since the discovery of the first exoplanet almost three decades ago, the number of known exoplanets has increased dramatically. By beginning of the 2000s it was clear that dedicated facilities to advance our studies in this field were needed. The CHaracterising ExOPlanet Satellite (CHEOPS) is a space telescope specifically designed to monitor transiting exoplanets orbiting bright stars. In September 2023, CHEOPS completed its nominal mission duration of 3.5 yr and remains in excellent operational conditions. As a testament to this, the mission has been extended until the end of 2026. Aims. Scientific and instrumental data have been collected throughout in-orbit commissioning and nominal operations, enabling a comprehensive analysis of the mission’s performance. In this article, we present the results of this analysis with a twofold goal. First, we aim to inform the scientific community about the present status of the mission and what can be expected as the instrument ages. Secondly, we intend for this publication to serve as a legacy document for future missions, providing insights and lessons learned from the successful operation of CHEOPS. Methods. To evaluate the instrument performance in flight, we developed a comprehensive monitoring and characterisation (M&C) programme. It consists of dedicated observations that allow us to characterise the instrument’s response and continuously monitor its behaviour. In addition to the standard collection of nominal science and housekeeping data, these observations provide valuable input for detecting, modelling, and correcting instrument systematics, discovering and addressing anomalies, and comparing the instrument’s actual performance with expectations. Results. The precision of the CHEOPS measurements has enabled the mission objectives to be met and exceeded. The satellite’s performance remains stable and reliable, ensuring accurate data collection throughout its operational life. Careful modelling of the instrumental systematics allows the data quality to be significantly improved during the light curve analysis phase, resulting in more precise scientific measurements. Conclusions. CHEOPS is compliant with the driving scientific requirements of the mission. Although visible, the ageing of the instrument has not affected the mission’s performance. The satellite’s capabilities remain robust, and we are confident that we will continue to acquire high-quality data during the mission extension.Fil: Fortier, Andrés. University of Bern; Suiza. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Simon, A. E.. University of Bern; SuizaFil: Broeg, C.. University of Bern; SuizaFil: Olofsson, G.. Stockholms Universitet. Departamento de Astronomia; SueciaFil: Deline, A.. Universidad de Ginebra; SuizaFil: Wilson, T. G.. University of Warwick; Reino UnidoFil: Maxted, P. F. L.. Keele University.; Reino UnidoFil: Brandeker, A.. Stockholms Universitet. Departamento de Astronomia; SueciaFil: Collier Cameron, A.. University of St. Andrews; Reino UnidoFil: Beck, M.. Universidad de Ginebra; SuizaFil: Bekkelien, A.. Universidad de Ginebra; SuizaFil: Billot, N.. Universidad de Ginebra; SuizaFil: Bonfanti, A.. Austrian Academy Of Sciences (oaw);Fil: Bruno, G.. Inaf-catania Astrophysical Observatory; ItaliaFil: Cabrera, J.. German Aerospace Center.; AlemaniaFil: Delrez, L.. Université de Liège; BélgicaFil: Demory, Brice Olivier. University of Bern; SuizaFil: Futyan, D.. Universidad de Ginebra; SuizaFil: Florén, H. G.. Stockholms Universitet. Departamento de Astronomia; SueciaFil: Günther, M. N.. Agencia Espacial Europea; EspañaFil: Heitzmann, A.. Universidad de Ginebra; SuizaFil: Hoyer, S.. Centre National de la Recherche Scientifique; FranciaFil: Isaak, K. G.. Agencia Espacial Europea; EspañaFil: Sousa, S. G.. Aix Marseille Université; Francia. Centre National de la Recherche Scientifique; FranciaFil: Stalport, M.. Research Centre For Astronomy And Earth Sciences; Hungría. Université de Liège; BélgicaFil: Petrucci, Romina Paola. Universidad Nacional de Córdoba. Observatorio Astronómico de Córdoba; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; ArgentinaFil: Villaver, E.. Universidad de La Laguna; España. Instituto de Astrofísica de Canarias; EspañaFil: Vinkó, J.. Research Centre for Astronomy and Earth Sciences; Hungría. ELTE Eötvös Loránd University; Hungría. University of Szeged; HungríaFil: Walton, N. A.. University of Cambridge; Estados UnidosFil: Wells, R.. University of Bern; SuizaFil: Wolter, D.. Institute of Planetary Research; Alemani

    Analysis of Early Science observations with the CHaracterising ExOPlanets Satellite (CHEOPS) using pycheops

    Get PDF
    Funding: ACC and TW acknowledge support from UK Science and Technologies Facilities Council (STFC) ST/R00824/1.CHEOPS (CHaracterising ExOPlanet Satellite) is an ESA S-class mission that observes bright stars at high cadence from low-Earth orbit. The main aim of the mission is to characterize exoplanets that transit nearby stars using ultrahigh precision photometry. Here we report the analysis of transits observed by CHEOPS during its Early Science observing programme for four well-known exoplanets: GJ 436 b, HD 106315 b, HD 97658 b and GJ 1132 b. The analysis is done using pycheops, an open-source software package we have developed to easily and efficiently analyse CHEOPS light curve data using state-of-the-art techniques that are fully described herein. We show that the precision of the transit parameters measured using CHEOPS is comparable to that from larger space telescopes such as Spitzer Space Telescope and Kepler. We use the updated planet parameters from our analysis to derive new constraints on the internal structure of these four exoplanets.PostprintPeer reviewe
    • …
    corecore