Adsorption and Quantum Chemical Studies on the Inhibition Potentials of Some Thiosemicarbazides for the Corrosion of Mild Steel in Acidic Medium

Three thiosemicarbazides, namely 2-(2-aminophenyl)-N phenylhydrazinecarbothioamide (AP4PT), N,2-diphenylhydrazinecarbothioamide (D4PT) and 2-(2-hydroxyphenyl)-N-phenyl hydrazinecarbothioamide (HP4PT), were investigated as corrosion inhibitors for mild steel in H2SO4 solution using gravimetric and gasometric methods. The results revealed that they all inhibit corrosion and their % inhibition efficiencies (%IE) follow the order: AP4PT > HP4PT > D4PT. The %IE obtained from the gravimetric and gasometric experiments were in good agreement. The thermodynamic parameters obtained support a physical adsorption mechanism and the adsorption followed the Langmuir adsorption isotherm. Some quantum chemical parameters were calculated using different methods and correlated with the experimental %IE. Quantitative structure activity relationship (QSAR) approach was used on a composite index of some quantum chemical parameters to characterize the inhibition performance of the studied molecules. The results showed that the %IE were closely related to some of the quantum chemical parameters, but with varying degrees. The calculated/theoretical %IE of the molecules were found to be close to their experimental %IE. The local reactivity has been studied through the Fukui and condensed softness indices in order to predict both the reactive centers and to know the possible sites of nucleophilic and electrophilic attacks

Treated Rhizophora mucronata tannin as a corrosion inhibitor in chloride solution

Treated Rhizopora mucronata tannin (RMT) as a corrosion inhibitor for carbon steel and copper in oil and gas facilities was investigated. Corrosion rate of carbon-steel and copper in 3wt% NaCl solution by RMT was studied using chemical (weight loss method) and spectroscopic (FTIR) techniques at various temperatures in the ranges of 26–90C. The weight loss data was compared to the electrochemical by the application of Faraday’s law for the conversion of corrosion rate data from one system to another. The inhibitive efficiency of RMT was compared with commercial inhibitor sodium benzotriazole (BTA-S). The best concentration of RMT was 20% (w/v), increase in concentration of RMT decreased the corrosion rate and increased the inhibitive efficiency. Increase in temperature increased the corrosion rate and decreased the inhibitive efficiency but, the rate of corrosion was mild with RMT. The FTIR result shows the presence of hydroxyl group, aromatic group, esters and the substituted benzene group indicating the purity of the tannin. The trend of RMT was similar to that of BTA-S, but its inhibitive efficiency for carbon-steel was poor (6%) compared to RMT (59%). BTA-S was efficient for copper (76%) compared to RMT (74%) at 40% (w/v) and 20% (w/v) concentration respectively. RMT was efficient even at low concentration therefore, the use of RMT as a cost effective and environmentally friendly corrosion inhibiting agent for carbon steel and copper is herein proposed

Time-of-flight secondary ion mass spectrometry analysis of chitosan-treated viscose fibres

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) was employed to analyse cellulose viscose fibres treated with different chitosan-based solutions. The analysis reports several new features in the TOF-SIMS spectra for systems with various forms of chitosan-treated surfaces. The characteristic positive ion TOF-SIMS signals for chitosan are reported at m/z 147.90, 207.07, and 221.09, and characteristic signals for trimethyl chitosan are present at m/z 58.03 and 102.09. Furthermore, new fragments were suggested to characterise acetylated chitosan molecules. The relative surface concentrations of different species were obtained based on the specific signal ratios (originating from a specific fragment and cellulose). SIMS imaging was then performed in order to investigate the surface distribution of chitosan, trimethyl chitosan, and Na-containing nanoparticles. In order to perform TOF-SIMS imaging, the above-mentioned characteristic signals were employed and m/z 22.99 was used for Na nanoparticles.status: publishe

Cellulose nanofibrils-reduced graphene oxide xerogels and cryogels for dielectric and electrochemical storage applications

The effect of structure (density and porosity) and composition (ratio) of composites prepared from cellulose nanofibrils (CNF) and reduced graphene oxide (RGO) as film-like xerogels and porous cryogels, respectively, were investigated related to their dielectric performance and electrochemical storage abilities. A very small content (5 wt%) of RGO incorporated xerogelic film of a denser and layered structure shows relatively high dielectric constant of similar to 85 and similar to 164 and an ac electrical conductivity of 0.0028 S/m(2) and 0.0072 S/m(2) at 270 K and 370 K, respectively, at a high frequency of 1 MHz showing their suitability for high temperature dielectric storage applications. On the other hand, a high specific capacitance of similar to 460 F/g and electrochemical resistance of 12-15 Omega cm(2) was observed for well-aligned and longitudinal-oriented micro-porous cryogel, indicate on its suitability as electrodes for electrochemical storage devices. (C) 2018 Elsevier Ltd. All rights reserved

Coupling of electrochemical, electrogravimetric and surface analysis techniques to study dithiocarbamate/bronze interactions in chloride media

International audienceInteraction between ammonium pyrrolidinedithiocarbamate (PDTC) and bronze in 30 g L-1 NaCl was investigated at several concentrations between 0.1 and 10 mM by means of various electrochemical and spectroscopic techniques. Electrochemical measurements revealed a fast adsorption process of PDTC on Cu and Pb and the formation of a thick insulating and protective film with a high surface coverage. At high concentrations, PDTC prevents oxides formation. Surface analyses confirm PDTC adsorption on bronze mainly via interaction between sulphur atoms and Cu sites to form Cu I-PDTC complex