Metabolism of profenofos to 4-bromo-2-chlorophenol, a specific and sensitive exposure biomarker.

Profenofos is a direct acting phosphorothioate organophosphorus (OP) pesticide capable of inhibiting β-esterases such as acetylcholinesterase, butyrylcholinesterase, and carboxylesterase. Profenofos is known to be detoxified to the biologically inactive metabolite, 4-bromo-2-chlorophenol (BCP); however, limited data are available regarding the use of urinary BCP as an exposure biomarker in humans. A pilot study conducted in Egyptian agriculture workers, demonstrated that urinary BCP levels prior to application (3.3-30.0 μg/g creatinine) were elevated to 34.5-3,566 μg/g creatinine during the time workers were applying profenofos to cotton fields. Subsequently, the in vitro enzymatic formation of BCP was examined using pooled human liver microsomes and recombinant human cytochrome P-450s (CYPs) incubated with profenofos. Of the nine human CYPs studied, only CYPs 3A4, 2B6, and 2C19 were able to metabolize profenofos to BCP. Kinetic studies indicated that CYP 2C19 has the lowest Km, 0.516 μM followed by 2B6 (Km=1.02 μM) and 3A4 (Km=18.9μM). The Vmax for BCP formation was 47.9, 25.1, and 19.2 nmol/min/nmol CYP for CYP2B6, 2C19, and 3A4, respectively. Intrinsic clearance (Vmax/Km) values of 48.8, 46.9, and 1.02 ml/min/nmol CYP 2C19, 2B6, and 3A4, respectively, indicate that CYP2C19 and CYP2B6 are primarily responsible for the detoxification of profenofos. These findings support the use of urinary BCP as a biomarker of exposure to profenofos in humans and suggest polymorphisms in CYP 2C19 and CYP 2B6 as potential biomarkers of susceptibility

Bioremediation of Industrial Wastes of Oil Refineries as an Environmental Solution for Water Pollution

Four waste water samples were taken from Cairo Oil Refinery Company (CORC) at Mostorod, representing two groups according to their total petroleum hydrocarbon (TPH) contents; the relatively highly polluted samples were taken from El-Taktir American Petroleum Institute (API) separator and the low polluted ones were taken from El-Islah API separator. Mechanical treatments show percentages removal in Total petroleum hydrocarbons (TPH) of 50% and 35% in the outlet effluent of El-Taktir and El-Islah API separators, respectively with TPH concentrations of 250 mg/l and 65 mg/l, respectively. Biotreatment of sterilized mechanically treated water samples with Staphylococcus xylosus for 7 days of incubation at  30 °C, pH 7 and 200 rpm show the high biodegradation efficiency of the isolated bacteria and its preference to work on the high concentration than the low one with percentage removal of 90% and 72.31%, respectively. This led to final TPH concentrations in El-Taktir and El-Islah water samples of 25 mg/l and 18 mg/ l, respectively with approximately complete removal of normal and iso alkanes independent of the TPH  concentration. AB1 is also able to degrade Pristane (Pr) and Phytane (Ph) in the highly polluted sample with 73.41% and 54.96%, respectively while it shows complete removal of Pr and Ph in the low polluted sample. Biotreatment shows also high biodegrading efficiency in the unresolved complex mixture (UCM); aromatics, naphthenes and alicyclic hydrocarbons with percentages removal of 88.59% and 68.93% for El-Taktir and El-Islah water samples, respectively

Union of the European Phoniatricians' position statement on the exit strategy of phoniatric and laryngological services : staying safe and getting back to normal after the peak of coronavirus disease 2019 (issued on 25th May 2020)

Background The following position statement from the Union of the European Phoniatricians, updated on 25th May 2020 (superseding the previous statement issued on 21st April 2020), contains a series of recommendations for phoniatricians and ENT surgeons who provide and/or run voice, swallowing, speech and language, or paediatric audiology services. Objectives This material specifically aims to inform clinical practices in countries where clinics and operating theatres are reopening for elective work. It endeavours to present a current European view in relation to common procedures, many of which fall under the aegis of aerosol generating procedures. Conclusion As evidence continues to build, some of the recommended practices will undoubtedly evolve, but it is hoped that the updated position statement will offer clinicians precepts on safe clinical practice.Peer reviewe

Dynamic self-assembly of DNA minor groove-binding ligand DB921 into nanotubes triggered by an alkali halide.

We describe a novel self-assembling supramolecular nanotube system formed by a heterocyclic cationic molecule which was originally designed for its potential as an antiparasitic and DNA sequence recognition agent. Our structural characterisation work indicates that the nanotubes form via a hierarchical assembly mechanism that can be triggered and tuned by well-defined concentrations of simple alkali halide salts in water. The nanotubes assembled in NaCl have inner and outer diameters of ca. 22 nm and 26 nm respectively, with lengths that reach into several microns. Our results suggest the tubes consist of DB921 molecules stacked along the direction of the nanotube long axis. The tubes are stabilised by face-to-face π-π stacking and ionic interactions between the charged amidinium groups of the ligand and the negative halide ions. The assembly process of the nanotubes was followed using small-angle X-ray and neutron scattering, transmission electron microscopy and ultraviolet/visible spectroscopy. Our data demonstrate that assembly occurs through the formation of intermediate ribbon-like structures that in turn form helices that tighten and compact to form the final stable filament. This assembly process was tested using different alkali-metal salts, showing a strong preference for chloride or bromide anions and with little dependency on the type of cation. Our data further demonstrates the existence of a critical anion concentration above which the rate of self-assembly is greatly enhanced

G-quadruplex-binding small molecules ameliorate C9orf72 FTD/ALS pathology in vitro and in vivo

Intronic GGGGCC repeat expansions in C9orf72 are the most common known cause of frontotemporal dementia (FTD) and amyotrophic lateral sclerosis (ALS), which are characterised by degeneration of cortical and motor neurons, respectively. Repeat expansions have been proposed to cause disease by both the repeat RNA forming foci that sequester RNA-binding proteins and through toxic dipeptide repeat proteins generated by repeat-associated non-ATG translation. GGGGCC repeat RNA folds into a G-quadruplex secondary structure, and we investigated whether targeting this structure is a potential therapeutic strategy. We performed a screen that identified three structurally related small molecules that specifically stabilise GGGGCC repeat G-quadruplex RNA We investigated their effect in C9orf72 patient iPSC-derived motor and cortical neurons and show that they significantly reduce RNA foci burden and the levels of dipeptide repeat proteins. Furthermore, they also reduce dipeptide repeat proteins and improve survival in vivo, in GGGGCC repeat-expressing Drosophila Therefore, small molecules that target GGGGCC repeat G-quadruplexes can ameliorate the two key pathologies associated with C9orf72 FTD/ALS These data provide proof of principle that targeting GGGGCC repeat G-quadruplexes has therapeutic potential

Understanding mixed sequence DNA recognition by novel designed compounds: the kinetic and thermodynamic behavior of azabenzimidazole diamidines

Sequence-specific recognition of DNA by small organic molecules offers a potentially effective approach for the external regulation of gene expression and is an important goal in cell biochemistry. Rational design of compounds from established modules can potentially yield compounds that bind strongly and selectively with specific DNA sequences. An initial approach is to start with common A·T bp recognition molecules and build in G·C recognition units. Here we report on the DNA interaction of a synthetic compound that specifically binds to a G·C bp in the minor groove of DNA by using an azabenzimidazole moiety. The detailed interactions were evaluated with biosensor-surface plasmon resonance (SPR), isothermal calorimetric (ITC), and mass spectrometry (ESI-MS) methods. The compound, DB2277, binds with single G·C bp containing sequences with subnanomolar potency and displays slow dissociation kinetics and high selectivity. A detailed thermodynamic and kinetic study at different experimental salt concentrations and temperatures shows that the binding free energy is salt concentration dependent but essentially temperature independent under our experimental conditions, and binding enthalpy is temperature dependent but salt concentration independent. The results show that in the proper compound structural context novel heterocyclic cations can be designed to strongly recognize complex DNA sequences

Design and Synthesis of Heterocyclic Cations for Specific DNA Recognition: From AT-Rich to Mixed-Base-Pair DNA Sequences

The compounds synthesized in this research were designed with the goal of establishing a new paradigm for mixed-base-pair DNA sequence-specific recognition. The design scheme starts with a cell-permeable heterocyclic cation that binds to AT base pair sites in the DNA minor groove. Modifications were introduced in the original compound to include an Hbond accepting group to specifically recognize the G-NH that projects into the minor groove. Therefore, a series of heterocyclic cations substituted with an azabenzimidazole ring has been designed and synthesized for mixed-base-pair DNA recognition. The most successful compound, 12a, had an azabenzimidazole to recognize G and additional modifications for general minor groove interactions. It binds to the DNA site −AAAGTTT− more strongly than the −AAATTT− site without GC and indicates the design success. Structural modifications of 12a generally weakened binding. The interactions of the new compound with a variety of DNA sequences with and without GC base pairs were evaluated by thermal melting analysis, circular dichroism, fluorescence emission spectroscopy, surface plasmon resonance, and molecular modeling

Goal setting for persuasive information systems: Five reference checklists

The concept of goals is prominent in information systems and also artificial intelligence literature such as goal-oriented requirements engineering and self-adaptive systems. Digital motivation systems, e.g. gamification and persuasive technology, utilise the concept of behavioural goals which require a different mind-set on how to elicit and set them up, how to monitor deviation from such goals and how to ensure their completion. Behavioural goals are characterised by a range of factors which are not the main focus in classic information systems and AI literature such as self-efficacy, perceived usefulness. To engineer software supporting goal setting, a concretised taxonomy of goals would help a better-managed analysis and design process. In this paper, we provide a detailed classification of behavioural goals and their associated properties and elements (types, sources, monitoring, feedback, deviation and countermeasures). As a method, we review the literature on goal setting theory and its application in different disciplines. We subsequently develop five reference checklists which would act as a reference point for researchers and practitioners in persuasive and motivational systems