11 research outputs found
Inelastic Displacement Amplification Factor for Ductile Structures with Constant Strength Reduction Factor
Shaking table test and numerical analysis of a 1:12 scale model of a special concentrically braced steel frame with pinned connections
A procedure for generating performance spectra for structures equipped with passive supplemental dampers
Structural response of vertically irregular tall moment-resisting steel frames under pre- and post-earthquake fire
Post-earthquake fire resistance of CFRP strengthened reinforced concrete structures
Post-earthquake fire (PEF) presents a high risk to buildings that have been partially damaged in a prior earthquake, particularly in urban areas. As most standards and criteria ignore the possibility of fire after earthquake, buildings are not adequately designed for that possibility, and thus, PEF is a high-risk load needed to be scrutinized further, codified and become part of a routine design. An investigation based on sequential analysis inspired by FEMA356 is performed here on two RC frames, of three and five stories, at the Life Safety performance level and designed to the ACI 318-08 code, after they have been subjected to a spectral peak ground acceleration of 0.35g. A fire analysis of the weakened structures follows, from which the time it takes for the damaged structures to collapse is determined. As a point of reference, the fire resistance is also determined for undamaged structures and before the occurrence of earthquake. The results show that structures previously damaged by the earthquake and exposed to PEF are considerably more vulnerable than those that have not been damaged previously. A method using carbon fiber-reinforced polymer as a means of relocation of plastic hinges away from the column faces towards the beams is introduced as a function of the time required for fire extinguishment or evacuation. This is carried out to increase the structural load-carrying capacity, thus reducing the potential damage for the anticipated earthquake and thereby improve the PEF resistance. The results show a considerable improvement in the PEF resistance of the frames. While the investigation and the proposition relate to a certain class of structures (ordinary buildings, intermediate RC structures, three and five stories) and the results can therefore be applied only to the cases investigated, it is hoped that this study paves the way for further research into this very important phenomenon and leads to an eventual revision of codes
Investigating the effect of prior damage on the post-earthquake fire resistance of reinforced concrete portal frames
Post-earthquake fire (PEF) can lead to a rapid collapse of buildings that have been partially damaged as a result of a prior earthquake. Almost all standards and codes for the design of structures against earthquake ignore the risk of PEF, and thus buildings designed using those codes could be too weak when subjected to a fire after an earthquake. An investigation based on sequential analysis inspired by FEMA356 is performed here on the immediate occupancy (IO), life safety (LS) and collapse prevention (CP) performance levels of two portal frames, after they are pushed to arrive at a certain level of displacement corresponding to the mentioned performance level. This investigation is followed by a fire analysis of the damaged frames, examining the time taken for the damaged frames to collapse. As a point of reference, a fire analysis is also performed for undamaged frames and before the occurrence of earthquake. The results indicate that while there is minor difference between the fire resistances of the fire-alone situation and the frames pushed to the IO level of performance, a notable difference is observed between the fire-alone analysis and the frames pushed to arrive at LS and CP levels of performance and exposed to PEF. The results also show that exposing only the beams to fire results in a higher decline of the fire resistance, compared to exposing only the columns to fire. Furthermore, the results show that the frames pushed to arrive at LS and CP levels of performance collapse in a global collapse mode laterally, whereas at the IO level of performance and fire-alone situation, the collapse mechanism is mostly local through the collapse of beams. Whilst the investigation is conducted for a certain class of portal frames, the results confirm the need for the incorporation of PEF into the process of analysis and design, and provide some quantitative measures on the level of associated effects