38 research outputs found
Properties of the CsI(Tl) detector elements of the CALIFA detector
In the R3B experiment at FAIR, charged particles with energies up to 600 MeV and forward boosted γ-rays with energies up to 20 MeV need to be detected in scattering experiments. Calorimeters for nuclear physics experiments of this kind, using relativistic radioactive ion beams, require high energy resolution and high efficiency for simultaneous detection of strongly Doppler shifted γ-rays and high-energy charged particles. A calorimeter design that can meet these requirements, using CsI(Tl) scintillators, results in detector elements that may exhibit light output variations with crystal depth, which can limit the attainable resolution. In this paper we present results from a systematic study of 478 detector modules of CALIFA, the R3B calorimeter, in order to determine and minimize such variations. To facilitate further systematic studies we also present results for the total absorption length of the scintillation light, using spectrophotometry, light crosstalk between adjacent detector modules, and surface topography of the CsI(Tl) crystals from atomic force microscopy.Swedish research council | Ref. 2017-03986Swedish research council | Ref. 2014-06644Swedish research council | Ref. 2013-04178Swedish research council | Ref. 2012-04550BMBF, Alemania | Ref. 05P15WOFNABMBF, Alemania | Ref. 05P19WOFN1BMBF, Alemania | Ref. 05P15RDFN1BMBF, Alemania | Ref. 05P19RDFN
Nuclear astrophysics with radioactive ions at FAIR
R. Reifarth et al: ; 12 págs.; 9 figs.; Open Access funded by Creative Commons Atribution Licence 3.0 ; Nuclear Physics in Astrophysics VI (NPA6)The nucleosynthesis of elements beyond iron is dominated by neutron captures
in the s and r processes. However, 32 stable, proton-rich isotopes cannot be formed during
those processes, because they are shielded from the s-process
ow and r-process -decay chains.
These nuclei are attributed to the p and rp process.
For all those processes, current research in nuclear astrophysics addresses the need for more
precise reaction data involving radioactive isotopes. Depending on the particular reaction, direct
or inverse kinematics, forward or time-reversed direction are investigated to determine or at least
to constrain the desired reaction cross sections.
The Facility for Antiproton and Ion Research (FAIR) will oer unique, unprecedented
opportunities to investigate many of the important reactions. The high yield of radioactive
isotopes, even far away from the valley of stability, allows the investigation of isotopes involved
in processes as exotic as the r or rp processes.This project was supported by the HGF Young Investigators Project VH-NG-327, EMMI, H4F,
HGS-HIRe, JINA, NAVI, DFG and ATHENA.Peer Reviewe
Proton-proton correlations observed in two-proton decay of (19)Mg and (16)Ne
Proton-proton correlations were observed for the two-proton decays of the ground states of 19Mg
and 16Ne. The trajectories of the respective decay products, 17Ne+p+p and 14O+p+p, were mea-
sured by using a tracking technique with microstrip detectors. These data were used to reconstruct
the angular correlations of fragments projected on planes transverse to the precursor momenta.
The measured three-particle correlations reflect a genuine three-body decay mechanism and allowed
us to obtain spectroscopic information on the precursors with valence protons in the sd shel
β-Delayed and isomer spectroscopy of neutron-rich Ta and W isotopes
Decays of neutron-rich A ~ 190 nuclei have been studied following projectile fragmentation of a 208Pb beam on a 9Be target at the GSI Fragment Separator. Gamma-ray decays from previously reported isomeric states in 188Ta, 190W and 192, 193Re were used as internal calibrations for the particle identification analysis, together with the identification of previously unreported isomeric decays in 189Ta and 191W. The current work also identifies β-delayed γ rays following the decay of 188Ta to 188W for the first time.Algora, Alejandro, [email protected] ;
Molina Palacios, Francisco Manuel, [email protected];
Rubio Barroso, Berta, [email protected]
Angular momentum population in fragmentation reactions
Neutron-deficient nuclei with N = 126 have been populated following projectile fragmentation of a 238U beam with energy 1 GeV/A. The decay of several previously reported isomers has been measured. This will allow us to calculate high-spin isomeric ratios and compare them with model calculations to allow a better understanding of the reaction mechanism.Algora, Alejandro, [email protected] ; Molina Palacios, Francisco Manuel, [email protected] ; Rubio Barroso, Berta, [email protected]
Quasi-free neutron and proton knockout reactions from light nuclei in a wide neutron-to-proton asymmetry range
The quasi-free scattering reactions 11C(p,2p) and 10,11,12C(p,pn) have been studied in inverse kinematics at beam energies of 300–400 MeV/u at the R3B-LAND setup. The outgoing proton-proton and proton-neutron pairs were detected in coincidence with the reaction fragments in kinematically complete measurements. The efficiency to detect these pairs has been obtained from GEANT4 simulations which were tested using the 12C(p,2p) and 12C(p,pn) reactions. Experimental cross sections and momentum distributions have been obtained and compared to DWIA calculations based on eikonal theory. The new results reported here are combined with previously published cross sections for quasi-free scattering from oxygen and nitrogen isotopes and together they enable a systematic study of the reduction of single-particle strength compared to predictions of the shell model over a wide neutron-to-proton asymmetry range. The combined reduction factors show a weak or no dependence on isospin asymmetry, in contrast to the strong dependency reported in nucleon-removal reactions induced by nuclear targets at lower energies. However, the reduction factors for (p,2p) are found to be 'significantly smaller than for (p,pn) reactions for all investigated nuclei.German Federal Ministry of Education and Research | Ref. BMBF 05P2015RDFN1German Federal Ministry of Education and Research | Ref. 05P15WOFNAEuropean Commission | Ref. FP7, ENSAR, n. 262010Comisión Interministerial de Ciencia y Tecnología (CICYT) | Ref. FPA2012-32443Comisión Interministerial de Ciencia y Tecnología (CICYT) | Ref. FPA2015-64969-07387Comisión Interministerial de Ciencia y Tecnología (CICYT) | Ref. FPA2015-69640-C2-1-PSwedish Research Council | Ref. 621-2011-5324National Science Foundation, EE. UU. | Ref. n. 1415656Department of Energy, EE. UU. | Ref. n. DE-FG02-08ER41533Fundação para a Ciência e a Tecnologia | Ref. PTDC/FIS/ 103902/200
Coulomb dissociation of O-16 into He-4 and C-12
We measured the Coulomb dissociation of O-16 into He-4 and C-12 within the FAIR Phase-0 program at GSI Helmholtzzentrum fur Schwerionenforschung Darmstadt, Germany. From this we will extract the photon dissociation cross section O-16(alpha,gamma)C-12, which is the time reversed reaction to C-12(alpha,gamma)O-16. With this indirect method, we aim to improve on the accuracy of the experimental data at lower energies than measured so far. The expected low cross section for the Coulomb dissociation reaction and close magnetic rigidity of beam and fragments demand a high precision measurement. Hence, new detector systems were built and radical changes to the (RB)-B-3 setup were necessary to cope with the high-intensity O-16 beam. All tracking detectors were designed to let the unreacted O-16 ions pass, while detecting the C-12 and He-4
Coulomb dissociation of N 20,21
Neutron-rich light nuclei and their reactions play an important role in the creation of chemical elements. Here, data from a Coulomb dissociation experiment on N20,21 are reported. Relativistic N20,21 ions impinged on a lead target and the Coulomb dissociation cross section was determined in a kinematically complete experiment. Using the detailed balance theorem, the N19(n,γ)N20 and N20(n,γ)N21 excitation functions and thermonuclear reaction rates have been determined. The N19(n,γ)N20 rate is up to a factor of 5 higher at
Coulomb dissociation of 16O into 4He and 12C
We measured the Coulomb dissociation of 16O into 4He and 12C at the R3B setup in a first campaign within FAIR Phase 0 at GSI Helmholtzzentrum für Schwerionenforschung, Darmstadt. The goal was to improve the accuracy of the experimental data for the 12C(a,?)16O fusion reaction and to reach lower center-ofmass energies than measured so far. The experiment required beam intensities of 109 16O ions per second at an energy of 500 MeV/nucleon. The rare case of Coulomb breakup into 12C and 4He posed another challenge: The magnetic rigidities of the particles are so close because of the same mass-To-charge-number ratio A/Z = 2 for 16O, 12C and 4He. Hence, radical changes of the R3B setup were necessary. All detectors had slits to allow the passage of the unreacted 16O ions, while 4He and 12C would hit the detectors' active areas depending on the scattering angle and their relative energies. We developed and built detectors based on organic scintillators to track and identify the reaction products with sufficient precision
Structural Potting of Large Aeronautic Honeycomb Panels: End-Effector Design and Test for Automated Manufacturing
Structural potting is used to prepare honeycomb panels to fix metallic elements, typical in aircraft doors. In this paper, a full procedure for structural potting using robotic arms is presented for the first time. Automating this procedure requires the integration of, first, machining operations to remove the skin layers and prepare the potting points and, then, resin injection into the honeycomb cells. The paper describes the design, prototyping, and testing of specific end-effectors. Different end-effectors were explored to ensure efficient injection. The results obtained with the prototypes show that the potting quality is adequate to accomplish the required process checks for industrial manufacturing. The injection process time can be reduced by a factor greater than 3.5, together with the extra assets associated with the automation of complex tasks. Therefore, structural potting automation is demonstrated to be feasible with the end-effectors proposed for milling and injection, which are ready for use with conventional robotic arms in manufacturing lines.Ministerio de Ciencia e Innovacion | Ref. PGC2018-099746-B-C2